Beruflich Dokumente
Kultur Dokumente
System Information
www.huawei.com
to MS through Um interface
network identity parameters (CGI, CID)
cell selection parameters
system control parameters
network function parameters
System information can be sent through two kinds of logical
channels
System information on BCCH (IN the IDLE mode)
System information on SACCH (Dedicated mode)
Page 2
SYS INFO 1
SYS INFO 1
SYS INFO 1
Cell Channel Description
(cell channel description format)
RACH Control Parameter
(random access channel control parameter)
Page 3
Page 4
MS MAX Retrans
Value Range: 1, 2, 4, 7
Unit: Time(s)
Description: It is one of the random access control parameters. MS
Page5
MAXRETRANS3, MAXRETRANS4
Value Range: 1, 2, 4, 7
Unit: Time(s)
Default Value: 7 Times
Description: MAX Retransmissions is the upper limit of times that
Page6
Page7
TX-integer
Parameter ID: TX
Value Range: 3~12, 14, 16, 20, 25, 32, 50
Unit: RACH Timeslot (equals to a TDMA frame,
4.615ms)
Default Value: 32
Description: Used to calculate the number of timeslots in
Page8
Calculation of S
TX-integer
S
Non-Combined CCCH
Combined CCCH
3, 8, 14, 50
55
41
4, 9, 16
76
52
5, 10, 20
109
58
6, 11, 25
163
86
7, 12, 32
217
115
Page9
Page 10
SYS INFO 2
SYS INFO 2
Content
SYS INFO 2
NCC Permitted
RACH Control Parameter
HUAWEI TECHNOLOGIES CO., LTD.
Page 11
NCC Permitted
Parameter ID: NCCPERMIT
Value Range: Selection of 0~7 Perm.
Default Value:
11111111
Page12
Page 13
Page 14
Page 15
Page 16
SYS INFO 3
SYS INFO 3
SYS INFO 3
Cell Identity
LAI (location area identity)
Control Channel Description
Cell Option
Cell Selection Parameter
RACH Control Parameter
HUAWEI TECHNOLOGIES CO., LTD.
Page 17
(LAI) and Cell Identity (CI). And LAI includes Mobile Country
Code (MCC), Mobile Network Code (MNC), and Location Area
Code (LAC). SYS INFO 3, 6, and 4 contain all or part of the
information of CGI. According to the received SYS INFO, MS
decodes the CGI, and decide whether it can register in the
network based on the MCC and MNC indicated by CGI. At the
same time, it can judge whether the current location area is
changed, so as to decide whether it is necessary to start the
location updating process.
Page 18
Page 19
Cell Option
Cell option contains the following parameters:
Page 20
Page 21
MS_TXPWR_MAX_CCH
Parameter ID: FMSMAXOPCC
Value Range: 0~19
Unit: level
Default Value: 5 (900MHz cell),0 (1800/1900MHz cell)
Description: This parameter determines the maximum transmit
GSM: 5(33dBm) to
19(5dBm)
DCS: 0(30dBm) to
15(2dBm)
Page22
Page24
Page25
update
Page26
Paging Resources
What kind of CCCH channels are configured?
Page27
1comp combined
BCCH
1Non comp main
CCCH Conf
BCCH
3 combined BCCH
9 Main BCCH
compounding CCCHs.
BCCH + 2 extended
BCCH
Default Value: When there is one TRX in the cell, one combined CCCH
Page28
command
Value Range: 0~7 (Non-Compounding CCCHs), 0~2
(1 combined
CCCH)
Unit: Block
Default Value: 2 (Non-combined CCCH), 1(1 combined CCCH)
Description: BS-AG-BLKS-RES, indicating the number of the
CCCH message blocks reserved for the AGCH. After the CCCHs
are configured, the value of this parameter indicates the actual
seizure rates of the AGCHs and the PCHs over the CCCHs.
MML: SET GCELLIDLEBASIC
HUAWEI TECHNOLOGIES CO., LTD.
Page29
Page30
Paging Times
Value Range:1~8
Unit: Times
Default Value: 4
Description: This parameter is used for BTS to determine
Parameters
Page31 Page31
Page31
PWRC
Parameter ID: CANPC
Value range: Yes, No.
Default Value: Yes
Description: It is used to indicate MS whether to delete received level value
Page32
Page 33
SYS INFO 4
SYS INFO 4
SYS INFO 4
LAI
Cell Selection Parameter
RACH Control Parameter
CBCH Channel Description (optional)
CBCH Mobile Allocation
SI4 Rest Octets (parameters related to cell reselection)
HUAWEI TECHNOLOGIES CO., LTD.
Page 34
Page 35
Page 36
Page 37
SYS INFO 5
SYS INFO 5
SYS INFO 5
Neighbor Cell Description.
HUAWEI TECHNOLOGIES CO., LTD.
Page 38
Page 39
Page 40
Page 41
Page 42
SYS INFO 6
SYS INFO 6
SYS INFO 6
Cell Identity
LAI
Cell Option
NCC Permitted
Page 43
Page 44