Sie sind auf Seite 1von 17

Single Site Verification

Report

Prepared by: Rodolfo H. Erbito IV

SSV Report
-Consolidation of all the data from the DT (Drive test) Engineer and summarized it
in a Excel template provided by the customer.
Important Reminders:
1.All Test Snapshot should be Complete
-G900 (27 pictures)
-G1800 (48 pictures)
-LTE C1 (27 pictures)
-LTE C2 (33 pictures)
2. All Test Logfiles should be complete
-G900 (12 Logfiles)
-G1800 (36 Logfiles)
-LTE C1 (15 Logfiles)
-LTE C2 (15 Logfiles)
Note: If theres a missing Test Snapshot you can replay it in testphone
and take a screenshot.

The Test Snapshot should be complete details.


For G900 and G1800 MO:
ARFCN Absolute Radio Frequency Channel Number
-it is should be correct. If you are in the sector 1
ARFCN value should be the sector 1.
Long/Lat:
- Should be display/ seen in the picture.
MCC MNC LAC and CI
- Should be seen in the picture
and correct based on Data base.
RxLEV- >-80
RxQual- >3

For G1800 DL and UL


ARFCN
-it is should be correct. If you are in the sector 1
ARFCN value should be the sector 1.

Long/Lat:
- Should be display/ seen in the picture.

MCC MNC LAC and CI


- Should be seen in the picture
and correct based on Data base.
RxLEV- >-80

DL - > 40 kbps
UL- > 20 kbps

For LTE MO:

EARFCN (EUTRA absolute radio freq Channel number


C1= 9310
C2= 9485
PIC (Physical Cell ID)
MCC MNC TAC AND CI
RSRP= >-80
CINR= > 30
Long/ Lat

For LTE DL and UL:


EARFCN (EUTRA absolute radio freq Channel number
C1= 9310
C2= 9485
PIC (Physical Cell ID)
MCC MNC TAC AND CI
RSRP= >-80
CINR= > 30
Long/ Lat
Target DL
C1- 50Mbps
C2- 37.5 Mbps
Target UL
C1- 20Mbps
C2- 15 Mbps

Things that we need for SSV report:


1. Report Template.

GSM Report
Template

LTE report
Template

2. Data Base (GSM and LTE all version).


3. Test Snapshot
4. Site Audit Picture
5. Google Earth ( for Test Point Information Picture)

SSV Report

1. Input the picture of a site location


from the site audit picture.
2. Write the site name and site ID
3. Write the SSV date
(date of SSV done)

1. Site Information.
Address: Data base
Longitude/Latitude: Actual audit (GPS)
Installation type/Tower Location and
Tower type: can be seen in actual audit
TX Configuration: Data Base

2. Planned vs Actual
The planning side is from the data base
The Actual side is from Actual audit.
Put a remark in blank space how the ACL
Measured.

3. Basic Parameter
The basic parameter is from database.
Note: the data base should be reflected in
test snapshot like BCCH BSIC LAC.

Active KPI Measurement


The value is from the test snapshot:
Voice call MO
Download
Upload
Ping
Note: For G900 the testing is only calls no DATA testing.

For LTE
Active KPI Measurement
The value is from the test snapshot:
Voice call MO
Download
Upload
Ping

Neighbor Cell List


You can get it from 2G NEIGHBOR updated excel file form ZTE.
2G Neighbor Cell
List

Raw Data
- Just Insert the following data in the column
-Site Audit Pictures
-Test Snapshot (if the report is GSM only insert GSM and vise versa for LTE)
- EMS Dump, Scan and RRU Test Snapshot is from the ICR (Internal common room)
Note: GSM and LTE has a different EMS Dump, Scan
and RRU

There is a format for requesting EMS Data

How to insert file in excel


1.Click Insert bar
2.Click object (Small box will appear)
3.Click create from file the browse.
4.Open the file that you need.
5.Check the Display as icon.

How to insert file

We need to make a Test point information.


To make Test point Information we need:
1.Google earth.
2.Test Snapshot of GPS location.
3.SnagIt or Fast Stone editor.

How to create test


point

Das könnte Ihnen auch gefallen