Beruflich Dokumente
Kultur Dokumente
Liquid limit.
Plastic limit
Shrinkage limit.
Liquid limit:-The boundary water content at which a soil changes from a viscous liquid
to a plastic state is called as liquid limit (LL).
Plastic limit:- The water content at which a soil changes from plastic limit to semi solid
state is known as plastic limit (PL). The range of water contents over which soil
deforms plastically is known as plastic plasticity index (PI). PI=LL-PL.
Shrinkage limit:-The water content at which the soil changes from semi-solid state to a
solid state is called as shrinkage limit (SL).
The Clay and Silt are those soil that expand and shrink due to
moisture content.
These tests are used widely in the preliminary stage of building any
structure to ensure that the soil not too much change in volume as it
expands and shrinks with different moisture content.
Let us consider a soil initially in a liquid state and is allowed to dry uniformly.
We have changed the state of fine grained soils by changing water content. Since we
engineers are interested in strength and deformation of materials .At one extreme (in the
liquid state) soil has the lowest shear strength and the largest deformation. At the other
extreme (solid state) the soil has largest strength and the lowest deformation . A measure
of soil strength using the Atterberg Limit is known as liquidity index (LI). LI=(wPL)/PI where w is the water content.
If LI<0 Semi solid state ( high strength, brittle in nature), if 0<LI<1 Plastic
state( intermediate strength, deformation takes place, if LI>1 liquid state (low strength,
soil deforms like viscous material)
He observed that if the water content of the soil water suspension is decreased then the
soil water suspension from liquid state to the plastic solid finally to solid state.
10