Beruflich Dokumente
Kultur Dokumente
METHOD OF
MEASUREMENT OF BUILDING AND
CIVIL ENGINEERING WORKS
PART 23 PILING
1 .SCOPE
2. MODE OF
MEASUREM
ENT
&
INCLUDED/
EXCLUDED
2.1)
PRECAST
REINFORCED
CONCRETE
PILES.
N/A
NRM2
POMI
For the purposes
of measurement
1.piles shall be
measured
by
length;
reinforcement
shall be given
separate
point
when
driven,
stating the number.
Inclusion :
1. Heads and shoes
shall
be
enumerated
2. Cutting off tops
of
piles
and
connections
for
lengthening piles
shall
be
enumerated
CESSM4
NRM2
POMI
Inclusion:
Mould , Formwork, links and sleeves,
strapping, bolts and lifting holes. in the
description
2.2)
4.1 measured in running metre ,stating the
TIMBER species of timber and size of the pile.
PILES
Length extra over 5 m shall be measured
in stages of one metre.
4.1.1 Dia. of the pile to be measured at 2
metre below the large end of the pile.
4.1.2 Shaping and shoeing of pile shall be
enumerated, stating the approximate
weight of the shoe and size of the pile.
Inclusions :
1 Handling, transportation and pitching of
piles .
2 Supply and fixing of iron rings to the
pile head before driving and also the 3 3 3
labour involved in cutting off the ringed
portion
4 Joints in piles
Measured by length,
reinforcement shall be given
separately.
2.3)
STEEL
SHEET
PILES
CESSM4
1. Measured by weight.
2. Struts, anchor bolts, anchor
plates, turn buckles, walling
measured separately ref. to IS :
1200 ( Part 8)
3 Painting to be measured in
Sq.M
4.Driving corner piles & junction
piles to
be measured in Rmt.
5.Cutting/burning through steel
piles to be measured in Rmt. as
extra over the pile & disposal of
cut length shall be described.
Inclusions :
1 The cross-sectional shape,
nomenclature of manufacture,
specification of material, details
of fabrication
2 Piles exceeding 12 m in length
shall be described separately
stating the lengths in further
stages of 3 m.
NRM2
POMI
2.4)
CAST
IN
SITU
DRIVEN
CONCRETE
PILES
CESSM4
NRM2
POMI
1) Shall comprise
(a) an item for the no. of
piles (P 12 * 1)
(b) an item for the total
concreted length of piles (P 12 * 2)
(c) an item for the total depth bored
or driven (P 12 * 3).
2) The concreted lengths of cast in
place concrete piles shall
be measured from the cut-off levels
expressly required to the
toe levels expressly required.
2) Diameter:
1 300 mm or 350 mm
2 400 mm or 450 mm
3 500 mm or 550 mm
4 600 mm or 750 mm
5 900 mm or 1050 mm
6 1200 mm or 1350 mm
7 1500 mm
1)Measured in (m),
Lengths are measured
along the axes
of the piles from the
commencing level to
the bottom of the pile.
2) Type stated.
3)Nominal size or dia.
4) Total bored or
driven length: Max.
length
5) Total concreted
length.
6)Total number.
7)Contiguous/secant
piling described.
8) Permanent casings
shall be stated.
9) Raking, inclination
stated.
10) Reinforcement to
precast concrete piles.
1.piles shall be
measured by length;
reinforcement shall
be given separate
point when driven,
stating the number.
Inclusion :
Inclusion & Exclusion :
The provision of pile shoes shall be maximum depth of piles shall be N/A
included in the item.
the depth which is not exceeded by
any pile included in the item.
Inclusion :
1. Heads and shoes
shall be enumerated
2. Cutting off tops
of
piles
and
connections
for
lengthening
piles
shall be enumerated
2.5)
CAST IN SITU
BORED
REINFORCED
CONCRETE
PILES
CESSM4
NRM2
POMI
Same as CAST
IN SITU
DRIVEN
CONCRETE
PILES
N/A
Same as CAST
IN SITU
DRIVEN
CONCRETE
PILES
N/A
Inclusion :
Cutting off tops of piles and
forming enlarged bases
2.6)
REINFORCED
CEMENT
CONCRETE
SHEET PILES
CESSM4
NRM2
POMI
1)Measured in (t)
2)Nominal size and type of
bars stated.
3) Reinforcement is deemed
to include tying wire and
spacers plus links and binders
that are incorporated at the
discretion of the contractor.
4) Types of bars include plain,
deformed and helical.
Inclusions:
The c/s shape, grade of concrete,
size of agg. and extra strength of the
head.
Any requisite mould ,necessary
strapping, bolts and lifting holes
N/A
N/A
N/A
2.7) VIBROCOMPACTED
PILES
N/A
N/A
1) Measured in m
2) Nominal diameter.
3) Total number
N/A
2.8)VIBROCOMPACTED
TRENCH FILL
N/A
N/A
1)Measured in m
2) Nominal width and depth
stated
N/A
CESSM4
NRM2
POMI
2.9)
TIMBER
SHEET
PILES
N/A
2.10)
BORED
PRECAST
CONCRE
TE PILES
N/A
CESSM4
N/A
N/A
NRM2
POMI
N/A
N/A
N/A
N/A
N/A
2.12)
TESTING
PILING
IS 1200 CESSM4
(Part 23)
N/A
1 )Maintained loading with various
reactions
2) Constant rate of penetration
3) Horizontal loading
4) Test load: not exceeding 100 t
2 100200 t
3 200300 t
4 300400 t
5 400600 t
6 600800 t
7 8001000 t
8 exceeding 1000 t
4 Non-destructive integrity
5) Inclinometer installations
2.13)
N/A
INTERLOCKING
STEEL PILES
2.14)
STONE PILING
N/A
N/A
1) Diameter: not exceeding
300 mm
300 mm 450 mm
450 mm 600 mm
600 mm 750 mm
750 mm 900 mm
900 mm 1050 mm
1050 mm 1200 mm
exceeding 1200 mm
2) Number of columns nr
NRM2
POMI
1) Measured in nr
2) Details stated.
3)
Timing stated
1 Only measured where
specifically
instructed.
2 Deemed to include all
associated
labour, plant and overheads.
1)Measured in Sq.m
N/A
Total driven area, maximum
length stated.
2)Section modulus and c/s size,
or section ref. stated.
INCLUSION & EXCLUSION
1)Removal to be stated if not N/A
left to discretion of contractor.
2)The cost of extraction is
deemed included
N/A
3.
Other
Standards
CESSM4
NRM2
POMI
N/A
N/A
N/A
N/A