Sie sind auf Seite 1von 6

DESIGN AND FABRICATION OF

MULTI NUT TIGHTNER AND REMOVER


by
1. PRAVEENKUMAR P 512213114126
2. PRASANNAKUMAR P.S 512213114122
3. PRATHEEPKUMAR B 512213114125
4. SABARINATHAN K 512213114147
Under the
Guidance of
Mr. Raguraman
Associate
professor

Department of Mechanical Engineering


S.K.P. Engineering College
Problem Statement
Existing Project :
Impact wrenches is most commonly used in the place where the high torque output is
required , likewise it is used to remove the wheel nuts of automobiles by means of
electric or hydraulic powers.

Gap:
It takes more time and causes damage to thread, so we go for multi nut tightner.

Solution:
To reduce time and thread damage
To used to reduced human effort during tightening and loosening the nut,
So we go for multi nut tightener is used.
Objectives
The main objective of this project is to automize the labour
work in tightening or removing the nuts one by one.
This project focus on the minimization of human effort and
time consuming for fixing all four nuts of the four wheel tyre
in a single stroke.
To avoid time wasting and lot of energy used to change the
tyre
Methodology
Gear calculation :
To determine the diameter and the number of teeth in the gear for the further
process.
Fabrication:
To fabricate the components required for assembly such as gear, base plate,
spanner holder and central shaft with spline key way.
Assembly:
Once all the materials are fabricated then the parts are assembled by means of
welding, nut and bolt arrangement.
Literature review

S.N AUTHOR TITLE NAME INFERENCE


O
1 Wen-Hsiang Hsie An experimental study In this paper he
on cam- describes that a
controlled planetary mechanism is driven
gear trains. by a motor at uniform
speed. the sun gear
can produce a non-
uniform motion by
engaging with the
planetary gear.
2 Kyung C. Kwon , Howard Catalytic deoxygenation of In this paper, Liquid
Mayfield , Ted Marolla, liquid biomass for biomass such as methyl
Bob Nichols , Mike hydrocarbon fuels laurate and canola oil is
Mashburn deoxygenated with H2
and NiMo/g-Al2O3
catalyst.
3 Muhammad S. Abu Bakar, Catalytic pyrolysis of rice We observed from this
James O. Titiloye husk for bio-oil production journal that catalytic
pyrolysis experiments
are carried out on Brunei
rice husk (BRH) to
obtain bio-oil using a
fixed-bed pyrolysis

Das könnte Ihnen auch gefallen