Beruflich Dokumente
Kultur Dokumente
Information
Information Gathering
Heating Request Form
Contact Information
information is inexcusable.
at
im
t
Es
Structure Information
Type of Construction
We cant start a heating system design
without knowing if it is a new system
or an existing system. A new system
leaves most of the design and layout
up to us but working with an existing
system present design limitations.
When adding on to an existing system
or retrofitting we are bound by the
existing pipe sizes and layouts. When
expanding or retrofitting, detailed
drawings/photos with pipe sizes will be
needed to integrate the new system
into the existing system.
Structure Information
Shown is an example of
the type of data that
Example Regional Heating and Cooling Data can be retrieved.
Structure Information
Style of Structure
The style of structure is also so
important when calculating the
surface area of the roof, gables
and sidewalls. Without this
information we will never be able
to calculate an accurate heatloss
for the greenhouse.
If the house is a venlo be sure to
note the number of peaks in the
notes section.
Structure Information
Structure Details
This is where you input the
details of the structure. The
length, width, under gutter
height and covering material all
effect the heatloss.
Multiple lines are available for
different zones if required.
Be sure to use the drop down
menus when selecting the
covering material.
Structure Information
Existing Equipment Details
This is where you input the details of
any existing equipment.
Good practice is to document any
existing equipment whether it will be
included or not.
Again photos and notes are vital here.
Structure Information
Fuel and Electrical Details
It is vital to know what type of
electrical service or fuel is
available to power any new
equipment. We cant specify a
boiler without knowing what fuel
is available and we cant size a
pump without knowing what
voltage/phase is available.
Again in this section is a spot to
note anything you think might be
important or to identify anything
unusual. Use this section, make
notes!
Heating System Information
Specific System Details
This is where you document
what is requested to heat the
greenhouse. Note what is
existing as well.
If existing heat is present in the
greenhouse you will need to
determine as much as you can
about the system (pipe sizes,
supply and return temp, number
of pipes, etc.). Use the notes!
This would also be the place to
note the type of boiler the
customer is looking for and
whether redundancy is required.
Use the notes section!