Sie sind auf Seite 1von 2

DO YOU KNOW THAT?

What are the common hazards What are the types of burns caused
- ELECTRICITY is always trying to find the whilst working with electricity? by electricity?
easiest path to ground.
- Exposed electrical parts - Electrical burn
- Electricity often uses your body as good
conductors because about 70% of the human - Overloaded circuits - Arc burn
body is WATER. - Damaged power tools and equipment - Thermal contact burns
- Higher voltages can cause larger currents - Wires with defective insulation Injuries that can be resulted from
and more severe shocks. electrical accident;-
- Incorrect wiring practices
- Power drills use 30 times as much current
- Overhead power lines - Deep burn caused by high tension voltage
as what will kill.
- Improper grounding - Ear damage and memory loss resulted from
- Currents passed across the chest are very
explosion (by arc blast)
dangerous and can cause immediate death. - Working in wet condition

Dos Donts
- WATER and ELECTRICITY do not mix Keep cable and - Do not extinguish electrical fire with water.
equipment dry. Use appropriate PPE to prevent
- Do not tie the cable on metal scaffold or steel structure
electrocution.
without protection.
- Ensure cables are laid properly in a location where it will
- Do not carry the tool from the cord and never yank the cord
not be easily damaged and cause electrocution.
to disconnect it from the receptacle.
- Join cable with proper connection but not insulation tape
- Do not use aluminium or metal ladder while working inside the
alone.
substation or near transformer.
- All equipment are properly earthed and cables are properly
- Do not carry out any electrical work unless all circuits and
protected with double insulation.
equipment are de-energized and lock-out/tag-out system is in
- Disconnect tools when not in use, before servicing, and place
when changing accessories such as blades, bits, disc etc.
- Do not overload by plugging too many appliances into one
- Use only tools and cables that are free from defects. outlet.
- Always use Socket Outlet Assembly (SOA) for electrical - Do not reset the circuit breaker without checking the fault.
REMEMBER! ELECTRIC SHOCK CAN CAUSE INJURY AND DEATH

A worker was electrocuted when


High tension electrical burn The left knee was energized, and High tension injury under normal the metal mobile scaffold contact
after current entered from hand the right knee was grounded looking skin (after exposed) with overhead lines

A worker was electrocuted and


High tension electrical burn High tension electrical burn High tension injury under normal died after contact with faulty
after current exit from foot after current exit from foot looking skin (after exposed) water pump

Hand burn caused by 25 KV A man was electrocuted while


Electrical burn on hand and arm exposure Body badly burnt by electrical fire working near transformer

Arm with third degree burn from Electrical burn after current exit A man electrocuted while trying
high-voltage line. from heel Body badly burnt by high voltage to steal copper wires

Das könnte Ihnen auch gefallen