Beruflich Dokumente
Kultur Dokumente
www.huawei.com
Overview
Overview
Description
Each of the above items provides the number of RRC CONNECTION
REJECT messages from the RNC to UEs in a cell due to radio resource
congestion after receiving RRC CONNECTION REQUEST messages
from the UEs, as shown below.
Measurement point
The measurement is triggered at point A as shown in the figure, that
is, when the RNC sends an RRC CONNECTION REJECT message to
a UE.
The RNC measures the items by the cells the UEs camps on and by
the causes for RRC connection reject.
Overview
ADD CELLHSDPA
Maximum Number of HS-
SF=16
PDSCH Codes .
-- The maximum number of Re-allocated to HSDPA if the codes used by the established
HS-PDSCH codes available DPCHs are much less than the codes available
in a cell
SF=16
It will be called back by DPCHs through reconfiguring
Minimum Number of HS- the codes for HSDPA if the codes are almost used up by
PDSCH Codes DPCH channels
-- The minimum number of
HS-PDSCH codes available
in a cell
Codes for
CCH and
Available codes for DPCH Reserved codes for HSDPA
HS-SCCH
SF=16
.
Node B enlarges the allocated codes for HSDPA temporally due
to HSDPA data transmission if the adjacent code is free
SF=16