Beruflich Dokumente
Kultur Dokumente
HEAT EXCHANGERS
Heat Transfer by Conduction 4
W/m2 W/m.K
Thermal Conductivity of solids 5
Thermal Conductivity of liquids 6
Thermal conductivity of gases 7
Example 8
This correlation is valid over the ranges 10 < Rel < 107 and 0.6 < Pr < 1000 where
Flow over a Flat Plate 15
q = (Th4 - Tc4) Ac
For a wall
For cylindrical
geometry
Typical value for overall heat transfer coefficient 20
Removable cover, one pass, and outside packed floating head heat exchanger
26
Operating pressure Fluids with low pressure Fluids with high pressure
drop drop
Design of Condensers
exchanger
Typical values for fouling factor coefficients 37
38
Temperature profile for different types of
heat exchangers
39
For co-current
40
Kerns Method
Bells method
This method is designed to predict the local heat transfer coefficient and
pressure drop by incorporating the effect of leak and by-passing inside the
shell and also can be used to investigate the effect of constructional
tolerance and the use of seal strip
Kerns Method 51
Bells method 52
53
54
55
56
stratified flow
annular flow
Design of Reboiler and Vaporizers 64
Forced-circulation reboiler
Kettle reboiler
Boiling heat transfer and pool boiling 65
Film boiling
66
Nucleate
boiling heat
transfer
coefficient
67
Critical flux
heat transfer
coefficient
Film boiling
heat transfer
coefficient
Convection boiling 68