Beruflich Dokumente
Kultur Dokumente
Improvement Plan
Huawei Confidential
INNER MANADO IMPROVEMENT PLAN
Status Subject Action Plan PIC Timeline
HCPT: Koko
Achieved 89% Unblock Status & 30% OA
Poor 2G Site Status Planning: Agung Tentative
Status(NY exclude outer site).
Ismoyo
HCPT: Koko
Achieved 87% Unblock Status & 44% OA
Fair 3G Site Status Planning: Agung Tentative
Status
Ismoyo
RO Planning:
Current Status: 100% already implemented
Good IuB (>21Mbps) Gunawan Tentative
(>21Mbps)
RO Implementation
22 sites needs to be beaming, excl. sites from
FM: Asrul
RO plan.
Fair
RO Planning: Shafir
Coverage Holes (Priority Sites) Blocked back Sites (1 site 2G & 2 sites March 20
NPM: Gunawan &
3G)
Charles
New RO Sites 17 sites still pending
All Major KPIs, influence by power &
capacity issue.
WPC are mostly in Good category already.
Fair KPI & WPC NPM: Charles March 15
Continuous Optimization Activities: Parameter
Tuning,Huawei
Physical Tuning, Neighbor Audit.
Confidential
INNER MANADO IMPROVEMENT PLAN
Status Subject Action Plan PIC Timeline
Priority Cluster Defined HCPT: Ricardo & Koko
Done Benchmark DT routs already proposed NPM: Charles & March 5
Conduct Benchmark with HPCT Sales team Gunawan
HS Power Settings
IRAT Compressed Mode Settings HCPT: Koko
On-
Progre 3G Throughput IRAT threshold Settings NPM: Charles & Tentatively
ss
Enhanced Fast Dormancy Gunawan
QOS Settings for Max Bit Rate
Huawei Confidential
SITE STATUS
2G Sites already reached 89%
3G: In order to reach 87% target.
Huawei Confidential
COVERAGE HOLES
Based from the DT benchmark, total of 42
sites needs to be beaming.
New Site Gladiator(13): Need to build
new sites (selfbuilt)
Blocked Sites (3): NPM and RO
Planning needs to work on those sites.
New Site RO (17): Problematic sites.
Huawei Confidential
KPI
Huawei Confidential
PRIORITY CLUSTERS BENCHMARK
Huawei Confidential
3G THROUGHPUT
Huawei Confidential
3G Strategy Summary
Strategies Before After Results Recommendation
1.HS Power Settings 0 -10 (1dB) EcNo improved 10% on Scanner measurement Apply this parameter
2. IRAT Compressed Mode User Data and Throughput in 3G RNC Solo showed
Long CM Short CM Parameter can be
Settings improvement.
implemented in
User data increased and Drop call rate degraded if combination
3. IRAT threshold Settings Early Late
using old formula.
4. Enhanced Fast SPU load reduction, throughput and data need Can be implemented in
Disable Enable
Dormancy further monitoring. High SPU Load RNC.
5. QOS Settings for Max Bit DL 7.2 Mbps DL2 Mbps
UL 2 Mbps UL 2 Mbps
Trial should be done in HLR
Rate
Huawei Confidential
1. HS Power [1]
Parameter HspaPower specifies the offset between total HSPA power and the max transmission power of a cell.
The total HSPA power is the maximum value of HSPA dynamical power can be adjusted.
Above result showed in RNC Bogor, around 10% and 8% improvement of Ec/Io respectively Scanner and UE
Huawei Confidential
1. HS Power Setting [2]
Huawei Confidential
2. IRAT Compressed Mode
Priority Parameter Name Current Setting Suggested Remarks
1 2F Hysteresis 4(2dB) 0(0dB) To prevent the compression mode from being long
the handover algorithm becomes fast in responding to signal
2 2F Event Trigger Delay Time D1280(1280ms) D640 change
3 2D Hysteresis 4(2dB) 6(3dB) To prevent the compression mode from being frequently enabled
By shortening CM, UE keep longer in 3G which is much more favorable for data service. Data Traffic and
Throughput increased in RNC Solo. Hysteresis parameter changes impact on both Data and Voice service.
Huawei Confidential
3. IRAT Threshold
Priority Parameter Name Current Setting Suggested Remarks
1 INTERRATR99PSTHD2DRSCP -105 -110 To delay compressed mode start, due to RSCP
IRAT Threshold can be tuned for specific services. This trial we changed only R99 in RNC Cirebon :
Total DL R99 Traffic increased, while Drop Call Rate slightly degraded.
Huawei Confidential
4. Enhanced Fast Dormancy [1]
Legacy Architecture EFD Architecture
Cell_DCH NodeB
Cell_DCH
IDLE Smart
NodeB RNC SGSN GGSN Cell_PCH
Phone Smart Phone RNC SGSN GGSN
For the pre fast dormancy UEs, the RNC checks for compatibility issues after receiving an SCRI message. If there are no compatibility issues, the RNC puts
the UE into the CELL_PCH state.
For the R8 fast dormancy UEs, the RNC puts the UE into the CELL_PCH state after receiving an SCRI message.
Huawei Confidential
4. Enhanced Fast Dormancy [2]
In EFD, UE that has low activity now moved to cell PCH state with simpler signaling procedure rather than
keep in DCH or disconnected to idle. Huge benefit on SPU load and UE battery life, while PS Drop formula
need to be revised since the introduction of new state of CELL_PCH.
Huawei Confidential
4. Enhanced Fast Dormancy [3]
Huawei Confidential
Huawei Confidential Page 17