Beruflich Dokumente
Kultur Dokumente
Microwave Antenna
Alignment
www.huawei.com
Wang Fuzhong
Transmission Engineering Dept.
HUAWEI TECHNOLOGIES CO., LTD.
HUAWEI TECHNOLOGIES CO., LTD. Page 1
Tools and Resources for antenna Alignment
Riggers for antenna alignment: 4person, 2 for each site
>15dB
Simplified to
Main Beam
During panning, If the difference between RSL with objective is less than 15dB, it
means the main beam already touched. Just do the fine-tuning.
Main beam
Boresight View
Main beam
+3.45V
Multi-Meter
RSSI or AGC
ODU Voltage
IF CABLE
RSSI/VAGC
IDU
Top
View
Line A-A represents the azimuth tracking path of a properly aligned antenna.
The main beam is at point 2, and the first side lobe at points 1 and 3.
Aligned properly
Proper Aligned
Safety check
Antenna and Outdoor works first under good weather condition
IF cabling or Elliptical waveguide laying
Indoor works (even in bad weather or night time)
Labelling all the cables and links
Grounding
Premises Cleaning after the works
Power Tapping
etc.
Panning antenna #01 with the same way as above, then fix it