Beruflich Dokumente
Kultur Dokumente
Olympus, Japan
Hansford Sensors, UK
YXLON, Germany
Y.Multiplex
Multiplex is the standard X-ray system
when it comes to CT capability
Products
Y.Cheetah
Y.Cheetah is the most efficient
X-ray system for the
radiographic inspection of
small parts.
Y.Cougar
Y.Cougar is an extraordinary X-ray
system that requires little space.
Products
Y.Access100
Y.Access100 is the modular
inspection system for the X-ray
inspection of very large parts.
Applications
X-ray inspection is the inspection standard in many industrial sectors.
The applications have been summarized as following;
1.Cast parts
Reliable detection of defects in casting
parts via X-ray technology.
2. Electronics
Inspection of electronics components
using 2D und 3D in order to safeguard
assembly function
Application
Welds
Weld inspection in the field and during
production places special demands on X-ray
systems
Material analysis
Analysis of soil samples to ensure profitable
development of raw materials
Computed Tomography
Typical CT Applications
1. Porosity/Inclusion
2. Dimensional Measurement
4. Wall-Thickness
5. Reverse Engineering
6. Structure Analysis
7. Assembly Analysis
8. Composite Analysis
9. Electronic Components
Typical CT Applications
1. Porosity/Inclusion:
Analysis of:
• internal defects
• porosities
• and inclusion.
Typical CT Applications
1. Porosity/Inclusion:
Typical CT Applications
2. Dimensional Analysis
Typical CT Applications
2. Dimensional Analysis
Typical CT Applications
3. Nominal/Actual Comparison:
Röders Tank
Typical CT Applications
3. Nominal/Actual Comparison:
Typical CT Applications
4. Wall-Thickness Analysis:
The Wall-Thickness allows
numerical or color coded analysis of
the minimum/maximum wall
thickness of the test part.
Typical CT Applications
4. Wall-Thickness Analysis:
Typical CT Applications
5. Reverse Engineering
Typical CT Applications
5. Reverse Engineering
Typical CT Applications
6. Structure Analysis:
Typical CT Applications
6. Structure Analysis: Concrete Block
Typical CT Applications
7. Assembly Analysis:
Connector housing
Typical CT Applications
8. Composite Analysis
Fiberscopes are flexible instruments that use a coherent fiber bundle to transmit an
image back to the inspector's eye.
• Standard Range Fiberscopes achieve the highest image quality in 6.0 mm, 8.4 mm
and 11.3 mm diameter at lengths of up to 3.0 m. All models feature four-way
angulation and interchangeable optical tip adapters.
• Small diameter fiberscopes can inspect narrow areas or where access is limited
and are available in 0.64 mm, 2.4 mm or 4.1 mm. Each model has an ocular focus
to ensure that the individual operator's eyesight is accommodated and can be
attached to CCTV and photographic equipment for image .
Standard Range Fiberscopes achieve the
highest image quality in 6.0 mm, 8.4 mm
and 11.3 mm diameter at lengths of up
to 3.0 m. All models feature four-way
angulation and interchangeable optical
tip adapters.
2. i-SPEED 3
The i-SPEED 3 high speed video camera has
been designed to an advanced specification
providing high resolution, extreme low light
sensitivity and up to 150,000 fps recoding,
making it the ideal analysis tool for high level
research.
3.i-SPEED PL
The i-SPEED PL is the latest addition to
the Olympus i-SPEED range - designed
for use by the creative media industry
for the production of documentaries,
commercials and music videos, the
camera is intuitive, highly portable and
produces exceptional quality images.
4. i-SPEED FS
The i-SPEED FS high speed video camera
was designed primarily, although not
exclusively for the ballistics market the
i-SPEED FS includes IRIG-B time stamping
and synchronization, record speeds of up
to 1,000,000 fps and 0.2 microsecond
global shutter.
Flaw Detectors
A wide range of flaw detectors
including corrosion modules and a
number of different transducers for
different applications.e.g
•EPOCH 600
•EPOCH 1000
•EPOCH LTC
•EPOCH XT
•EPOCH LT
Phased Array Solutions
For Advanced NDT
Olympus;
Phased Array solutions e.g;
• Omni Scan SX
• Omni Scan MX2
• TomoScan Focus LT
Thickness Guages
Olympus provides a wide range of
thickness gauges for thickness
measurement, Coating thickness,
Corrosion depth measurement e.g.
coating thickness, corrosion depth.
Eddy Current
Eddy current testing is widely
used in the industry that require
inspection of thin metal for
potential safety-related or
quality-related problems
UE Systems Provides a verity of ultraprobes used for Acoustic Emission testing e.g.
• Ultraprobe 100cs
• Ultraprobe 201 (caddy grease gun)
• Ultraprobe 2000
• Ultraprobe 3000
• Ultraprobe 9000
• Ultraprobe 10000
• Ultraprobe 15000
Applications
The Ultraprobe 15,000 Touch is the ultimate inspection system. Used for
almost any plant application, the system will measure, analyze and collect
all data using simple touch screen technology during your route
inspection.
1. Bearing/Conditions
2. Rubbing Conditions
3. Cavitation
4. Gears/Gear Boxes
5. Pumps/Motors
6. Lack of Lubrication/Over Lubrication
On board data logging utilizing Ultratrend DMS™ providing
• Manage routes
• Up & download via USB connection
• Multiple data views
• History tables/spread sheets
• Trend charts
• Export database & report documents to Excel
On-Board Analysis of Electrical Inspection
1. Valves
2. Steam Traps
3. Compressed Air
4. Compressed Gases (O2, NO, etc.)
Proceq
• The Proceq is a leading manufacturer of high quality portable instruments
for non-destructive testing of materials such as concrete, metal or paper.
57