Beruflich Dokumente
Kultur Dokumente
Calypso
Prerequisite
Adjustments General
EDM Information
File Conf.dat
Example
Supported Interfaces
EDM Systems
24.07.02/ Ggi
Carl Zeiss Industrial Metrology Group
Technical Information EDM Module
24.07.02/ Ggi
Carl Zeiss Industrial Metrology Group
Technical Information EDM Module
General
Every CMM user can generate
offset Data for EDM operation C
Case A Y
24.07.02/ Ggi
Carl Zeiss Industrial Metrology Group
Technical Information EDM Module
Case B
Step1
CMM generated offsets are transmitted automatically via
interface to EDM controller.
24.07.02/ Ggi
Carl Zeiss Industrial Metrology Group
Technical Information EDM Module
Case B
Step 2 ( This step occurs automatically each time of arrival of
new file to Controller of EDM System)
24.07.02/ Ggi
Carl Zeiss Industrial Metrology Group
Technical Information EDM Module with Calypso
Calypso
1. Option EDM
2.
( available > version 4.6)
Operator selects:
Establishing of 2 Coordinate
4.
Epost.exe 5. Steps 4. and 5. are
Sends - calculates contents done automatically
ASCII-File of output file
Erodier.edm -stores output file
24.07.02/ Ggi
Carl Zeiss Industrial Metrology Group
Technical Information EDM Module with Calypso
Preparing-
Assistance
EDM –Module
Or by using Toolbox, Insert
EDM-Module in Inspection plan
24.07.02/ Ggi
Carl Zeiss Industrial Metrology Group
Technical Information EDM Module
Example for one of the different interfaces definitions
Y0
Y
X0
X
24.07.02/ Ggi
Carl Zeiss Industrial Metrology Group
Technical Information EDM Module
24.07.02/ Ggi
Carl Zeiss Industrial Metrology Group
Technical Information EDM Module
File Conf.dat
(AGIE-Format- stored in
C:)\TEMP\AGIE\)
24.07.02/ Ggi
Carl Zeiss Industrial Metrology Group
Technical Information EDM Module
Y‘
1. 2. 3. 4. 5. 6. 7. 8.
00000000
0 ELEKEle,M,-38.611,34.783,50.242,-7.740;
| | | | | | | |_ 8. code Electrode / workpiece*
1 WKSEle,M,-38.611,34.783,50.242,-7.740;
| | | | | | |_ 7. free
| | | | | |_ 6. free
| | | | |_ 5. basic (1 exchanges basic system !) 0 ELEKEle,M,-38.611,34.783,50.242,-7.740;
1 ELEKEle,M,-42.944,29.266,50.242,7.740;
| | | |
| | | |_ 4. +/- C (1 exchanges +/- C)
| | |_ 3. +/- Z (1 exchanges +/- Z)
| |_ 2. +/- Y (1 exchanges +/- Y)
|_ 1. +/- X (1 exchanges+/- X)
1. 2. 3. 4. 5. 6. 7. 8.
00000000
| | | | | | | |_ 8. code Electrode / workpiece* 0 ELEKEle,M,-38.611,34.783,50.242,-7.740;
| | | | | | |_ 7. free 1 WKSEle,M,-38.611,34.783,50.242,-7.740;
| | | | | |_ 6. free
| | | | |_ 5. basic (1 exchanges basic system !)
0 ELEKEle,M,-38.611,34.783,50.242,-7.740;
| | | | 1 ELEKEle,M,-42.944,29.266,50.242,7.740;
| | | |_ 4. +/- C (1 exchanges +/- C)
| | |_ 3. +/- Z (1 exchanges +/- Z)
| |_ 2. +/- Y (1 exchanges +/- Y)
|_ 1. +/- X (1 exchanges+/- X)
Stored at ....\Agie.mes
Each measurement generates another line at the end of the files Agie.mes
24.07.02/ Ggi