Beruflich Dokumente
Kultur Dokumente
Applications:
Eddy Current
Testing PAUT & TOFD
• Rapid Inspection of Weld Seam
Coating • Complex Geometry Inspection
Inspection • Corrosion Inspection
• ASME & AWS Inspection
TOFD Eddy Current Testing
Positive • Inspection of Cracks
• Detection of metal thinning due to corrosion and
Material
erosion
Identification • Determination of coating thickness
Phased Array
• Measurement of electrical conductivity &
Ultrasonic magnetic permeability.
Testing
Positive Material Identification (PMI)
• Metal identification and analysis in metal
Tools Range •
recycling
Analysis of stainless steel in manufacturing
process
• Measurement of small parts i.e. screws, pins.
• Identification of precious metal alloys
67-D1, Suit #9G, Al- Hafeez View, Sir-Syed Road, Gulberg-III, Lahore – Pakistan.
Ph# +92 42 35774637, Fax#+92 42 35774638, Email:bdm3@miba.com.pk
NON DESTRUCTIVE TESTING
SERVICES
Magnetic
Ultrasonic Eddy Current Particle Radiography
Testing Testing Inspection
Dye Visual
Hardness
Penetrant Inspection
Testing
Testing
Inspection Methods
Ultrasonic Testing Dye Penetrant Testing
• Straight & Angle Beam UT • Dry & Wet (Visible and Fluorescent
• UT Thickness & Coating Inspection Inspection)
• Water Washable Penetrant Testing
Eddy Current Testing
• Surface & Sub Surface Inspection Hardness Testing
• Conductivity Measurement • Brinell Testing
• Sorting of Material • Rockwell B & C Testing
• Weld Inspection
• Tubing Inspection Visual Inspection
• Optical Magnifying Mirrors
Magnetic Particle Inspection • Measurement Gauges
• Hand Yoke & Bench Type Inspection • Remote Visual Inspection (RVI)
• Dry & Wet (Visible & Fluorescent • Boroscope
Inspection)
67-D1, Suit #9G, Al- Hafeez View, Sir-Syed Road, Gulberg-III, Lahore – Pakistan.
Ph# +92 42 35774637, Fax#+92 42 35774638, Email:bdm3@miba.com.pk
Oil Analysis
Oil Analysis:
Industrial equipment generally produce large wear particles and therefore it is
vital to ensure that the appropriate oil analysis goes beyond the detection of
particulate matter to answer questions regarding oil applicability, viscosity &
contamination as well as testing for the presence of water and other chemicals.
1. Viscosity at 40oC 14. Additive Depletion
2. Viscosity at 100oC 15. Glycol
3. Viscosity Index 16. Sulphation
4. Total Acid Number (TAN) 17. Pour Point
5. Total Base Number (TBN) 18. Particle Counting as per ISO/NAS
6. Water Content 19. Wear Debris Analysis (Ferrous & Non
7. Oxidation Ferrous Particle)
8. Nitration 20. Cont. Ferrous Particles
9. Elemental Oil Analysis 21. Cont. Non Ferrous Particle
10. Gravity/Density 22. Oxidation Stability Test
11. Dielectric constant 23. Air Release Test
12. Flash Point Testing
67-D1, Suit #9G, Al- Hafeez View, Sir-Syed Road, Gulberg-III, Lahore – Pakistan.
Ph# +92 42 35774637, Fax#+92 42 35774638, Email:bdm3@miba.com.pk
API Certification Services
Life Assessment
67-D1, Suit #9G, Al- Hafeez View, Sir-Syed Road, Gulberg-III, Lahore – Pakistan.
Ph# +92 42 35774637, Fax#+92 42 35774638, Email:bdm3@miba.com.pk
Welding Inspection Services
QA / QC Areas
Construction Material Verification Applicable Code Compliance
Construction material plays key role in the complete process To achieve an accurate and quality conscious product it is
cycle, MIBA provides QA/QC services to ensure and verify necessary that all the activities should be according to the
material Specifications upto the requirements code and standards, here MIBA can help you to apply the
applicable codes according to the requirements
Material Cutting and Fabrication
MIBA experts witness the whole fabrication operation i.e. QA/QC Documentation
material cutting, beveling, bending, fit-up and tacking etc., Documentation is an important part of any manufacturing
each above step adds quality to the structure according to process, each and every activity should be recorded on paper
procedure MIBA provides the compete document from raw material to
Welding and Consumables the finished product throughout the process cycle
Welding consumables are as important as the material itself
because welding strength is dependent on the consumables
selection and operation parameters, after careful selection of
consumables MIBA Welding Inspector monitors the welding
operation and parameters
67-D1, Suit #9G, Al- Hafeez View, Sir-Syed Road, Gulberg-III, Lahore – Pakistan.
Ph# +92 42 35774637, Fax#+92 42 35774638, Email:bdm3@miba.com.pk
MIBA
67-D1, Suit #9G, Al- Hafeez View, Sir-Syed Road, Gulberg-III, Lahore – Pakistan.
Ph# +92 42 35774637, Fax#+92 42 35774638, Email:bdm3@miba.com.pk