Beruflich Dokumente
Kultur Dokumente
PRESENTATION
THESIS TITLE
SUPERVISED BY
Dr. Md. Khasro Miah
Professor
Department of Civil Engineering
Dhaka University of Engineering & Technology , Gazipur
CONTENTS
• Introduction
• Objectives
• Materials & Methodology
• Results and Discussion
• Conclusion
INTRODUCTION
Selection of materials
Identification of materials properties
Preparation of specimen
Curing of specimen
Crushing of specimen
MATERIALS AND METHODOLOGY
Selection of Materials
120.1 120.1
100.1 100.1
80.1 80.1
% Finer
% Finer
60.1 60.1
40.1 40.1
20.1
20.1
0.1
0.1
1 10
1 10 Sieve Size (mm)
sieve size (mm)
Figure 1: Grain size distribution curve for Figure 2: Grain size distribution curve
fine aggregate For coarse aggregate
MATERIALS AND METHODOLOGY
Days 03 07
Sl No.
1 12.5 829 6.3 18.5 2.4 7.83 95.5 2.15 2.05 3.2 2.3 0.45 1:2:4 1992
2 12.5 829 6.3 18.5 2.4 7.83 95.5 2.15 2.05 3.2 2.3 0.54 1:2:4 2160
3 12.5 829 6.3 18.5 2.4 7.83 95.5 2.15 2.05 3.2 2.3 0.63 1:2:4 1865
4 12.5 829 6.3 18.5 2.4 7.83 95.5 2.15 2.05 3.2 2.3 0.72 1:2:4 2304
5 19 817 6.66 18.3 2.4 7.83 95.5 2.15 2.05 3.2 2.3 0.45 1:2:4 1662
RESULTS AND DISCUSSION
Compressive strength of concrete with various percent of
sand (fine sand and coarse sand)
500
4000
5000
4500 4195
4405 (psi)
4000 Coarse aggregate 12.5
3500 3273 size (mm)
3000 2750 Slump (mm) 83
2500 Fine Aggregate 2.78
2000 (FM)
1500
w/c ratio 0.45
1000
Mix Ratio 1:1.5:3
500
0
Variation of sand percentage
4500 4466
Strength
4400 (psi)
4300
Coarse aggregate 25
4239
4195
size (mm)
4200
Slump (mm) 78
4100 Fine Aggregate 2.41
4000 3982 (FM)
3900
w/c ratio 0.40
Mix Ratio 1:1.5:3
3800
3700
Variation of sand percentage
Figure 4 : Variation of compressive strength with fine sand percentage
RESULTS AND DISCUSSION
Compressive strength of concrete with various percent of
sand (fine sand and coarse sand)
FS:CS(100%:0%) FS:CS(75%:25%) FS:CS(50%:50%)
FS:CS(25%:75%) FS:CS(0%:100%) Compressive 3500 - 4440
5000 Strength
compressive strength(psi)
4500
4440
4325 4369 4423 (psi)
4000
Coarse aggregate 19
3582 size (mm)
3500
3000
Slump (mm) 80
2500 Fine Aggregate 1.65
2000 (FM)
1500 w/c ratio 0.40
1000 Mix Ratio 1:1.5:3
500
0
1
Variation of sand percentage
5000
y = 81.721x + 2225.6
R² = 0.5017
compressive strength (psi)
4000
3000
2000
1000
0
10 13 16 19 22 25 28
4000
3000
2000
1000
0
0 5 10 15 20 25 30
Aggregate size
Agg. Size
Mix ratio Equation(strength vs w/c ratio )
(mm)
12.5 01:01:02 y = -6232.2x + 7351.1
12.5 01:1.5:03 y = 4856.1x - 45.36
12.5 01:02:04 y = 712.22x + 1663.6
19 01:01:02 y = -1411.1x + 4912 y=strength
19 01:1.5:03 y = -4462.2x + 6104.3 x=w/c
19 01:02:04 y = 1120x + 1305.3
25 01:01:02 y = -47.778x + 3577.2
25 01:1.5:03 y = -8731.2x + 7865
25 01:02:04 y = -1300x + 2490.5
CONCLUSIONS
From the test results and analysis the following conclusion can be drawn:
Compressive strength of concrete be maximum for fine aggregate (FM 1.65)
at 0.40 and 0.45 w/c ratio, when coarse aggregate 19mm downgraded and
mix ratio 1:1.5:3 is used.
Compressive strength of concrete be maximum for fine aggregate (FM 2.41)
at 0.40 and 0.45 w/c ratio, when coarse aggregate 25 mm downgraded and
mix ratio 1:1.5:3 is used.
Table: 05 is proposed for mix design of brick aggregate.
Table 06 & Table 07 is proposed for mix design of brick aggregate