Beruflich Dokumente
Kultur Dokumente
Version Introduction
Version Date Author Checked Amendment Record
by
R1.0 2011-09-30 Wang Wenqiong *** RNC V4.11.10
References:
Internal Only▲
Course Objectives:
Understand the interfaces between RNC and
NEs and the functions of such interfaces;
Understand the functional units of RNC and
some typical boards;
Know the basic networking of RNC system.
Internal Only▲
Contents
Contents
Intra-shelf connections
Internal Only▲
Contents
Contents
Iub/Iur Interface
ATM Switch-Based Transmission and
Networking Mode
Node B
ATM
Transmission ATM STM-1
network
RNC
RNC
Iub/Iur Interface
SDH-Based Transmission and
Networking Mode
Node B E1
SDH
Transmission
network Channelized
STM-1
RNC
RNC
Iub/Iur Interface
IP-Based Transmission and Networking
Mode
Node B E1
IP/MPLS
Transmission
network GE
RNC
RNC
The RNC can connect and switch with IP backbone network through the interface
shelf. If the IP backbone network provides high-rate GE interfaces, direct access to
the RNC resource shelf is also acceptable. Choose suitable access mode according
to the application.
Transmission and Networking Solutions for Internal Only▲
Iub/Iur Interface
Hybrid Networking and Transmission Mode
Depending on different sites, use IP network in some sites and use the traditional SDH
transmission in other sites. Depending on different services, use SDH network with the
ciruit service and use IP backbone network with packet service.
Internal Only▲
Star Networking
In the star networking mode, ZXWR RNC directly connects with each
Node B, all of which are terminal equipment.
This networking mode is simple and easy to maintenance and
construction, with fewer intermediate links along the signal path and
higher reliability. Generally, it is used in urban areas with large
population.
Internal Only▲
Chain Networking
In the chain networking mode, signals pass more links, so the ling
reliability is poorer.
The chain networking mode is suitable for zonal sparsely-populated areas,
where it can save much transmission equipment. This mode is also
applicable to one site with multiple Node Bs.
In actual engineering networking, the chain networking is different from
the basic networking in the fact that transmission equipment is generally
used between ZXWR RNC and Node B as intermediate connection
because the sites are always dispersive. The commonly used
transmission media include microwave, optical cable, HDSL and coaxial
cable.
Internal Only▲
Hybrid Networking
Hybrid
networking mode
integrating star
and chain
networking
Internal Only▲
Course Review