0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
154 Ansichten9 Seiten
This document provides an overview of an RFID door lock Arduino project. It describes the components used, including an RFID reader that can recognize tags attached to objects, an Arduino board to control the system, and a servo motor to control the door lock. The output process explains that the RFID reader is placed outside the door and connected to the Arduino controller. When an authorized RFID tag is scanned, the system will grant access by controlling the door lock and LED lights. Unauthorized tags will be denied access.
This document provides an overview of an RFID door lock Arduino project. It describes the components used, including an RFID reader that can recognize tags attached to objects, an Arduino board to control the system, and a servo motor to control the door lock. The output process explains that the RFID reader is placed outside the door and connected to the Arduino controller. When an authorized RFID tag is scanned, the system will grant access by controlling the door lock and LED lights. Unauthorized tags will be denied access.
This document provides an overview of an RFID door lock Arduino project. It describes the components used, including an RFID reader that can recognize tags attached to objects, an Arduino board to control the system, and a servo motor to control the door lock. The output process explains that the RFID reader is placed outside the door and connected to the Arduino controller. When an authorized RFID tag is scanned, the system will grant access by controlling the door lock and LED lights. Unauthorized tags will be denied access.
ARDUINO PROJECT PRESENTATION Introduction to RFID DOOR LOCK
• The Basic necessity of security can be attained by
designing various door locks such as mechanical locks or electrical locks. These kind of door locks are designed with one or more keys, but for locking a large area various locks are needed. Generally, traditional locks are heavy and that are not strong as they can damage simply by using some tools. Electronic locks are better over mechanical locks, to resolve the security problems that are connected with the mechanical locks. In recent days every device uses digital technology. For example, identification of digital device using token, door lock system using digital technology, automatic door opening and closing, automatic door lock systems, etc. These kind of systems is used for controlling the movement of a door without using a key. COMPONENT • Make Effective Presentations • Using Awesome Backgrounds • Engage your Audience • Capture Audience Attention RFID READER
is a wireless device used to transfer data for
recognizing and tracking tags connected to objects. The tag includes electronically stored information. Some kind of tags is run by electromagnetic induction from magnetic fields formed near the reader. RFID reader includes an RF module and it acts as a both TX and RX of radio frequency signals. The transmitter of this module contains an oscillator to make the carrier frequency. A modulator to intrude data commands upon this carrier s/L and an amplifier to increase the signal enough to wake the tag. The receiver of this module includes a demodulator to extract the reverted information and also holds an amplifier to support the signal for processing. A microprocessor is used to form the control unit, which employs an OS and memory of this module filter and stores the information. ARDUINO BOEARD
based on the Atmega family. It consist
of 14 digital I/O pins. An Arduino board includes 6 analog i/ps, a USB, a reset button, an ICSP header a 16 Hz quartz crystal, and a power jack. It covers everything desired to support the microcontroller. It is simply connected to a computer with a USB cable. SERVO MOTOR
have integrated gears and a shaft that
can be precisely controlled. Standard servos allow the shaft to be positioned at various angles, usually between 0 and 180 degrees. Continuous rotation servos allow the rotation of the shaft to be set to various speeds. OUTPUT PROCESS:
The RFID reader is placed on the outside of the
door and it is detached from the controller confidentially so no one can avoid the security by breaking open the RFID reader and trying to short circuit the reader. The controller of this project receives serial information from the RFID reader and controls the Door lock and the LED. So, finally we can conclude that, when the person swipes with right RFID tag, then the access control system will be will be granted. In the same way, when the person swipes with an unauthorized RFID card, then the data will not be loaded and access will be denied. OUTPUT: PRESENTED BY:
• BARRION, NILO L. • HIC, VERONICA M. • HOBAYAN, ARGYL G. • CAMPOSANO, MYKA • MAGBANUA, JUDY MAE G.