0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
218 Ansichten13 Seiten
The document classifies hand tools into four categories: measuring tools, cutting tools, driving tools, and holding tools. It provides details on various measuring tools, including pull-push rules, steel tapes, steel rules, try squares, combination squares, micrometer calipers, Vernier calipers, and dividers. The document also describes hacksaws, noting they are tooth cutting tools with adjustable or fixed frames used to hold blades of different sizes for cutting.
The document classifies hand tools into four categories: measuring tools, cutting tools, driving tools, and holding tools. It provides details on various measuring tools, including pull-push rules, steel tapes, steel rules, try squares, combination squares, micrometer calipers, Vernier calipers, and dividers. The document also describes hacksaws, noting they are tooth cutting tools with adjustable or fixed frames used to hold blades of different sizes for cutting.
The document classifies hand tools into four categories: measuring tools, cutting tools, driving tools, and holding tools. It provides details on various measuring tools, including pull-push rules, steel tapes, steel rules, try squares, combination squares, micrometer calipers, Vernier calipers, and dividers. The document also describes hacksaws, noting they are tooth cutting tools with adjustable or fixed frames used to hold blades of different sizes for cutting.
Page 1 Hand tools are classified into four: 1. Measuring tools 2. Cutting tools 3. Driving tools and 4. Holding tools
Free Powerpoint Templates
Page 2 Each classification has different types and uses. 1. MEASURING TOOLS
Pull-push rule. This flexible rule when extended
will support itself, but may also be used to measure curved, irregular surfaces. Steel tape rule blade is usually ½ inch wide and 72 inches long. The graduation is sixteenths, except for the first 6 inches which are graduated in thirty-seconds of an inch.
Free Powerpoint Templates
Page 3 Steel tape is similar to a steel tape rule except for its flexible number of feet that are marked on the tape. The tape is 3/8 inch wide and available in lengths from 25 to 100 feet.
Free Powerpoint Templates
Page 4 Steel rule. This is the most common tool used in tool room. It is made of tampered steel about 1/8 inch thick and ¾ inch wide and 6 to 12 inches long. The same style maybe obtained in length from 1 to 48 inches. Free Powerpoint Templates Page 5 Try square is an instrument used to measure the square of an object.
Free Powerpoint Templates
Page 6 Combination square. It is an instrument combined with 45°, 90° and a protractor.
Free Powerpoint Templates
Page 7 Micrometer caliper. Is a precision measuring instrument used to measure dimensions in thousandths of an inch.
Free Powerpoint Templates
Page 8 Vernier caliper is a precision measuring instrument used to measure the inside, outside diameter, as well as depth of hole and slot.
Free Powerpoint Templates
Page 9 Dividers. These are used for measuring or setting of distances, and to lay out arcs and circles.
Free Powerpoint Templates
Page 10 Hacksaw is a tooth cutting tool usually with a solid and adjustable frame. Frame. It is the main body of the hacksaw which holds the blade. a. Fixed or solid frames are intended to hold only one size of blade at about 10 inches long
Free Powerpoint Templates
Page 11 b. Adjustable frame is frame that can be adjusted to hold blades of different sizes such as 10, 12 and 14 inches in length.
Free Powerpoint Templates
Page 12 Blade. It is made of thin, high grade steel usually 1.27 mm thick and 30.48cm long with an inclined row of teeth serving as cutter.