Beruflich Dokumente
Kultur Dokumente
Contents
1
Mysql Service Installation
C:\windows\system32>d:
D:\>cd mysql\bin
D:\ mysql\bin>mysqld.exe –install
Click enter for the commands to be executed.
3
Mysql Service Installation
4
Mysql Service Installation
Open ,and check the “Mysql” service.
User must
ensure “MySQL”
is started before
continuing.
5
Contents
6
Network Adapter Installation
hdwwiz.exe
We can use this command
to add a new device.
“MySQL” need a new
network card for IP
address.
1.Click Start – Search for cmd, right-click cmd and select “Run as
Administrator”
2.From the command prompt, run “hdwwiz.exe“. This should launch the “Add
Hardware Wizard“. Click Next.
7
Network Adapter Installation
8
Network Adapter Installation
9
Network Adapter Installation
10
Network Adapter Installation
11
Network Adapter Installation
Finished
12
Network Adapter Installation
To confirm the loopback adapter installed
13
Network Adapter Installation
99 . 99 . 99. 99
255 . 255 . 0 . 0
14
Contents
15
NMS Software Installation
Prerequisites
The related settings of the operating system are completed.
The MySQL database is installed successfully.
16
NMS Software Installation
17
NMS Software Installation
18
NMS Software Installation
Set your personal information.
Enter your personal information, and then click Next.
19
NMS Software Installation
Select a language. Select Chinese or English, and then
click Next.
20
NMS Software Installation
Choose whether to install the ASON control plane.
Select ASON1.0 or NO ASON as needed. Click Next.
21
NMS Software Installation
22
NMS Software Installation
Server Mode
The OTNM2000 server is connected to devices, and manages the devices.
A user can directly configure and manage a device through the OTNM2000
server, and detect the performance changes and alarm events of the device
through polling.
The OTNM2000 server is configured with a GUI management module, data
collection module, and data processing module.
The OTNM2000 server has independent database space.
To ensure normal running of the system, the server needs to enable the
related services.
The OTNM2000 server allows simultaneous access of at least 32 clients.
23
NMS Software Installation
Client Mode
A user can only configure and manage a device indirectly by accessing the
OTNM2000 server. The OTNM2000 is not directly connected to any device.
The OTNM2000 is configured only with a GUI management module. Its GUIs
are the same as those of the OTNM2000 server, and have the same operation
effect as that of the GUIs of the OTNM2000 server.
The OTNM2000 does not require any database space. The OTNM2000 can
work normally only after connecting to the database table space of the
OTNM2000 server.
The OTNM2000 does not need to enable the related services.
24
NMS Software Installation
Choose a database according to the database used on
the server.
25
NMS Software Installation
If you select MySQL, click Next. In the alert box that appears
subsequently, check whether the IP address is correct.
26
NMS Software Installation
Set the installation path.
It is recommended that
the master program
should be installed in
disk D. You can click
Browse… to modify the
installation path. After
setting the installation
path, click Next.
27
NMS Software Installation
Select Not install CORRA and click Next.
28
NMS Software Installation
Select a setup type. Select Typical and click Next.
29
NMS Software Installation
Confirm the installation information. If the installation
information is correct, click Next.
30
NMS Software Installation
Then, the system begins to install the master program,
as shown below.
31
NMS Software Installation
Wait……
32
NMS Software Installation
33
NMS Software Installation
C:\windows\system32>d:
D:\>cd otnm\md\alldb\mysql
D:\>OTNM\md\alldb\mysql\createalldbroot.exe
34
NMS Software Installation
35
NMS Software Installation
36
NMS Software Installation
37
NMS Software Installation
D:OTNM\ui\sbin\Service\start_ems_main_service.bat
38
NMS Software Installation
39
NMS Software Installation
40
NMS Software Installation
41
NMS Software Installation