Beruflich Dokumente
Kultur Dokumente
REVIEW-1
HEALTH MONITORING AND LOCATION TRACKING
FOR POLICEMAN
D.S.RANJITHKUMAR 710114106014
S.PADMAPRIYA 710114106013
T.ARUNKUMAR 710114106303
V.DHANARAJ 710114106304
GUIDED BY
Dr. A.Rajendran. Ph.d.
ABSTRACT
The project is an Internet of Thing (IoT) based health
monitoring and tracking system for policemen. The proposed
system can be mounted on the policemen's Accessories like jacket,
to track their health status and current location using GPS. These
information will be transmitted to the control room through IoT.
The proposed system comprise of tiny wearable physiological
equipment’s, sensors, transmission modules. Hence, with the use of
the proposed equipment, it is possible to implement a low cost
mechanism for the betterment in the working efficiency of the
policemen.
INTRODUCTION
The main aim of this project is to develop a wearable jacket which
is capable of tracking the location of policeman and it is also
capable of measuring basic health parameters of the police men.
Location sharing
BLOCK DIAGRAM
HARDWARE REQUIREMENTS
GSM module
Vibration sensor/accelerometer
Power supply
Lithium ion
GPS
LCD display
Temperature sensor
ESP8266
PIC16F877A
LM35 TEMPERATURE SENSOR
The LM35 series are precision
integrated-circuit temperature devices with an
output voltage linearly proportional to the
Centigrade temperature. The LM35 device has an
advantage over linear temperature sensors
calibrated in Kelvin, as the user is not required to
subtract a large constant voltage from the output
to obtain convenient Centigrade scaling. The
LM35 device does not require any external
calibration or trimming to provide typical
accuracies of ±¼°C at room temperature and
±¾°C over a full −55°C to 150°C temperature
range.
HEART RATE SENSOR