Beruflich Dokumente
Kultur Dokumente
DESIGN-1 DESIGN-2
LOADING ANALYSIS
MODELLING
MODELLING APPLICATION BASED ON THE AS ANALYSIS AND SLAB OF
OF BUILDING OF DEAD LOADING WAS DONE IN INDIVIDUAL
IN SOFTWARE LOAD, LIVE PROVIDED, PREVIOUS STOREY WILL
LOAD, STRUCTURE STEP DESIGN BE IMPORTED
SEISMIC WILL BE PREFERENCES TO SAFE AND
PLACING LOAD, etc ANALYSED WILL BE THEN IT WILL
BEAMS,COLU AND SELECTED AS BE DESIGNED
MN, DIFFERENT PER IN IT.
SLAB,SHEARW FORCES AND SUITABILITY
ALL, MOMENTS AND COLUM
MASONARY WILL BE AND BEAM
WALL COMPUTED WILL BE
DESIGNED IN
ETABS
2
• Material properties
1. Project Details
• Purpose of building: Institutional
• Shape of building: Regular (rectangular)
• No of stories: (G+18)
• Type of wall: Masonry
• Height of stories: 4.8m (similar)
5
• Load assigning
6
•Application of live load on slab
7
•Live load = 4 KN\mm2
8
•Load combinations
9
•Load combinations in an envelope
10
•Analysis
11
1. Support reactions at base (KN)
12
•Diagram for deflection (mm)
13
•Bending moment diagram (KN/mm2)
14
• Area of tensile reinforcement , no of
steel reinforcement , diameter of rebar's
.
15
• Detailing
16
RESULT
TYPICAL ELEVATION OF BEAM 1S
17
SCHEDULE OF BEAMS
18
• Cage view of beam(19CB8)
19
TYPICAL ELEVATION OF COLUMN
20
SCHEDULE OF COLUMN
21
• Cage view of column(CC5)
22
SLAB PLAN
23
BILL OF QUANTITIES(STORY 6- BEAM)
24
BILL OF QUANTITIES(STORY 6- SLAB)
25
DISCUSSION
1. As our structure is subjected to Earthquake loading and all the columns are
designed for min. reinforcement curtailment cannot be done.
2. As our structure is post tensioned , Beams placed at periphery is not subjected
to large moment.
3. Due to self load balancing of slab by tendons there is no need to place beams in
interior.
26
Conclusion
27
28