Beruflich Dokumente
Kultur Dokumente
PIN DESCRIPTION
• I/P0-I/P7 : Analog Inputs
• ADD A,B,C : Address lines for selecting analog inputs
• O7-O0 : Digital 8-bit output with O7 – MSB
• SOC : Start of conversion signal pin
• EOC : End of conversion signal pin
• OE : output latch enable pin, if high enable output
• CLK : clock input for ADC
• Vcc, GND : supply pins +5V and GND
• Vref+, Vref- : Reference voltage positive (+5V max) and
reference voltage negative (0 V min)
• ALE : It is required to load the selected address lines to
into the ADC
BLOCK DIAGRAM OF ADC 0808
TIMING DIAGRAM
ADC INTERFACING
• Ensure the stability of analog input, applied
to the ADC
• Issue start of conversion (SOC) pulse to the
ADC
• Read end of conversion (EOC) signal to
mark the end of conversion process
• Read digital data output of the ADC as
equivalent digital output
PROBLEM: