Beruflich Dokumente
Kultur Dokumente
Introduction of Workshop.
Introduction of My Section.
Theory content of topic.
Actual work done by me.
My observation.
Suggestion.
INTRODUCTION OF WORKSHOP
Jai Ganesh Toyota showroom is a reputed show room in Bhavnagar.
1. Office department
Front office
Back office
2. Work shop
Engine room
Electrical room
Tool storage room
3. Body & paint shop.
4. Parts storage room.
5. Washing department.
Wash one
Wash two
TOYOTA SHOWROOM
INTRODUCTION OF MY
SECTION.
THEORY CONTENT OF BODY SHOP
Actually in the body shop the body work done.
For example damaged part replace ment
Bonnet
Quarter panel
Bumper
Fender
Headlight supporter
Radiator
Apron
Tail light
Head light
Condenser
Rear panel
Boot door
Hinge
Door
Window mirror
Side mirror
Windshield
Grill
Rear windshield
Dashboard
ACTUAL WORK DONE BY ME
Innova crysta new headlight fitting
With the help of 10 no T spanner remove the bumper and upper grill
remove
Remove the head light screw remove
Head light remove and new headlight bracket fitting
head light screw fitting bumper and upper grill fitting and testing the
new head light fitting
Types of dent removal process
HAMMER AND DOLLY.
SPOT GUN METHOD.
Hammer and dolly:- determine the dent choose hammer and dolly according to
dent. there are two types of methods.
Hammer Off Dolly:-
Hammer off dolly is used to remove the majority of the dent. Start with the
indirect damage and move towards the direct damage. Use your dolly to push
your lows and your body hammer to tap down on the highs, or vice-versa.
Hammer off dolly should be used until the final straightening stages.
Hammer On Dolly
Hammer on dolly is used in the final stages of metal straightening to level
the smaller imperfections. Please be careful not to use hammer on dolly
technique too much, as it stretches the metal. If metal is overstretched, it
must be shrunk. In the video below, a student demonstrates repairing
dents using the hammer on dolly method.
THANK YOU