Beruflich Dokumente
Kultur Dokumente
8
Tahapan yang harus Dipersiapkan untuk
menggunakan X-PAC 7.2
• Membuat PIT Design dan Waste Dump
seperti biasa dalam MINCOM
• Membuat Solid disetiap PIT Design dan
Waste Dump.
• Mengeluarkan Polygon solid yang akan
digunakan didalam X PAC menjadi .CSV.
POLYGON XPAC PROCEDURE USING
MINESCAPE 4.116
• Open Solid Project (Strip Design Project Solid)
• In Pit Projection Rule, Right click and fill like a picture above
• Fill Parameter sample length with number 150
• Click Ok if the all parameter have been filled, for processing. The result can be seen in next
picture
• If Solid have been created, go to Reserve Sample Solid
• Unpick all of setup controls except graphical output.
• Unpick also accumulate and use centroid.
• Sample type choose point with sample density 100
• Fill the parameter, following picture above
• Empty all of parameter option at surface sets, interval, qualities, geology and graphical
output
• For Benches option fill with benches definition (for example, benches definition is 3.75)
• If the parameter have been filled, click Ok for Processing
• If Reserve processing have done, right click table file to see the table.
• The table must be sorted, so go to the icon process Sort
• In the window of sort table, choose blockname and bench to sort
• Click Ok for processing.
• If sorting table have done, go to Reserve Graphics Boundaries
• Fill the parameter follow the picture above
minus
Polygon Name
• Raw data yang dibutuhkan untuk
membuat Project X PAC adalah :
– Polygon Dump hasil Export dari langkah
diatas.
– Polygon Pit design hasil export dari langkah
diatas.
– Reserve Coal
– Reserve OB
– Reserve TS
– Volume Dump All
• LANGKAH SELANJUTNYA BISA DILIHAT
DI FILE VIDEO RECAMAN TRAINING