Beruflich Dokumente
Kultur Dokumente
SYSTEM USING
PROGRAMABLE NUMBERS
USING GSM
NAME:
ANKIT PATEL
SHUBHAM PARDESHI
AISHWARYA PATIL
SOORAJ NAIR
ABSTRACT
During the present day’s technology is all about
the automation and wireless control of all the
equipment used in industries, factories and
households. Any equipment that can be
controlled wirelessly is more easily maintained
and it responds very fast comparing to the
manual operation of the equipment. This project
uses the application of wireless communication
i.e. GSM network for the wireless control of the
electrical appliances. The project has been
implemented using GSM modem and 8051
microcontroller.
AIM
OBJECTIVE
o Develop a device that control the home
appliances.
LCD
GSM
RELAY
SOFTWARE REQUIREMENTS
PCB WIZARD
Keil µVision
HARDWARE DESCRIPTION
BLOCK DIAGRAM
PCB DESIGNING
Steps:
1. Printing the PCB Design
Keil µVision:
Keil Micro vision is used to develop and debug
the program required for the project.
FLOW CHART
APPLICATIONS
It can be used for home automation system.
Wireless System
Ease of use
DISADVANTAGES
Network connectivity in rural areas
Any issue with mobile carrier
RESULT & CONCLUSION
Testing the GSM module
Setting up the system
Responding To Commands
Desired Feedback
Feedback
RESULT & CONCLUSION
The project is aimed to design and implement a GSM based
wireless control of house hold electrical appliances. After
doing different tests and programming different codes,
eventually the obliged outcome is put forward. It is a fast
and efficient approach to control the devices. This
equipment works anywhere with a great gathering of
sign. The project GSM SIM900 based automation with
security using a microcontroller designed a complete
remote handling. From owner GSM mobile sending a
message to the GSM modem located in office or home is
considered to be as an input and the respective action
performed by the microcontroller by switching ON or OFF
the relays is considered to be the output. In this project we
have reduced the man power and have well maintained
new technology of automation by using cell phones and
GSM.
FUTURE SCOPE
Renewable resources can be utilized to power this
project such as solar panels , windmill, water mill
etc.
we can use timer of microcontroller to measure the
time period for how much time the appliances are
active, and so can manage energy sufficiently.
REFERENCES
Sedra and Smith, Microelectronic Circuits, fourth edition, Oxford
University Press, 1998
Stevens,Tim, “The smart office”, ISBN 0965708101(1994)
Hari CharanTadimeti, ManasPulipati, “Overview of Automation
Systems and Home Appliances Control using GSM and
Microcontroller”, Volume 2 Issue 4, April 2013
SajidullahS.Khan, AnujaKhoduskar, Dr. N.A,Koli,“Home automation
system”, IJAET/Vol.II/April-June,2011/129-132
R. Missaoui, H. Joumaa, S. Ploix, and S. Bacha, ―Managing energy
smart homes according to energy prices: Analysis of a building
energy managementsystem,‖ Energy Buildings, vol. 71, pp. 155–167,
Mar. 2014
C. Molitor et al., ―Multiphysics test bed for renewable energy
systems in smart homes,‖ IEEE Trans. Ind. Electron., vol. 60, no. 3,
pp. 1235–1248, Mar. 2013.
REFERENCES
D. M. Han and J. H. Lim, ―Smart home energy management
system usingIEEE 802.15.4 and Zigbee,‖ IEEE Trans. Consum.
Electron., vol. 56,no. 3, pp. 1403–1410, Aug. 2010.
C. Suh and Y.-B. Ko, ―Design and implementation of
intelligent home control systems based on active sensor
networks,‖ IEEE Trans. Consum.Electron., vol. 54, no. 3, pp.
1177–1184, Aug. 2008.
J. Byun, B. Jeon, J. Noh, Y. Kim, and S. Park, ―An intelligent
selfadjusting sensor for smart home services based on ZigBee
communications,‖IEEE Trans. Consum. Electron., vol. 58, no.
3, pp. 794–802, Aug. 2012.
H.Wang and J.Wang, ―Design and implementation of a smart
home based on WSN and AMR,‖ Appl. Mech. Mater., vol. 271-
272, pp. 1485–1489,2013.
J. M. Wang and H. B. Wei, ―Design of smart home
management system based on GSM and Zigbee,‖ Adv. Mater.
Res., vol. 842, pp. 703–707,2014.
THANK YOU