0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
88 Ansichten21 Seiten
This document describes a project to design an embedded device that can control up to 8 devices remotely via SMS messages sent from a mobile phone. A GSM modem connected to a microcontroller receives SMS messages and extracts the control signal, which is then sent to the devices. An LCD interface displays the messages. The system provides remote control capabilities without wired connections and saves time over traditional methods. It uses GSM for communication, which is widely available, low-cost, and reliable.
Originalbeschreibung:
Originaltitel
Motor speed monitoring control system & gsm modem.pptx
This document describes a project to design an embedded device that can control up to 8 devices remotely via SMS messages sent from a mobile phone. A GSM modem connected to a microcontroller receives SMS messages and extracts the control signal, which is then sent to the devices. An LCD interface displays the messages. The system provides remote control capabilities without wired connections and saves time over traditional methods. It uses GSM for communication, which is widely available, low-cost, and reliable.
This document describes a project to design an embedded device that can control up to 8 devices remotely via SMS messages sent from a mobile phone. A GSM modem connected to a microcontroller receives SMS messages and extracts the control signal, which is then sent to the devices. An LCD interface displays the messages. The system provides remote control capabilities without wired connections and saves time over traditional methods. It uses GSM for communication, which is widely available, low-cost, and reliable.
Adarsh Kumar Pandey (10804668) Aditya Pratap Singh Tomar (10802820) Introduction Objective Need Component Used Specifications Block Diagram GSM Modem Advantages Conclusion In this project the design aspects of an embedded device which can control up to 8 devices by sending a specific SMS message from a mobile phone are presented. This controller is extremely handy at places where we have to control the ON and OFF switching of the devices but no wired connection to that place is available. To implement this, a GSM modem is connected to a programmed microcontroller which would receive the SMS from a reference cell phone. The control signal part of the received SMS is extracted and is changed to microcontroller- preferred format. A PC which is connected to the microcontroller using a serial communication through RS232 can be used for monitoring and transmission of the control signals to the modem. AT commands were used for controlling the functionality of GSM modem is vastly used because of its simplicity in both transmitter and receiver design, can operate at 900 or 1800MHZ band, faster, more reliable and globally network. The monitoring is also done by interfacing a LCD to the microcontroller. Here the system is capable of controlling the motor by receiving control message from an authorized mobile number. Microcontroller is the heart of our system, which controls the overall operation of our system. System is always alert for receiving SMS from valid number and that message can be displayed on the LCD(Liquid Crystal Display). In the project work undertaken, GSM technology based automatic control system is designed to monitor and control speed of an Induction motor/DC motor and also performs necessary operation like start, stop, reverse the rotation etc. This project is made to Innovate the old one into a new one. That’s mean we are using the new technology Time saving is main objective. Advancement Time Speed Accuracy Reliable Flexible Efficient & Effective Power supply Regulated PS Microcontroller Motor GSM Modem Modem Connector Power Supply – 440/220 v, 50 Hz Regulated PS - 5v and 4.6v, 12v DC Microcontroller – 8255A Motor – AC/DC Motor GSM Modem – Nokia/ Samsung Mobile DTMF (Dual Tone Multi Frequency) A DTMF is used to decode the frequency and to give the instructions to microcontroller. Regulated Power Supply It is rectified ac 220 v to regulated 5 v dc. A TRIAC, or TRIode for Alternating Current is an electronic component approximately equivalent to two silicon-controlled rectifiers (SCRs/ thyristors) joined in inverse parallel (paralleled but with the polarity reversed) and with their gates connected together. The formal name for a TRIAC is bidirectional triode thyristor. GSM –Global System for Mobile Communication. A GSM modem is a wireless modem that works with a GSM wireless network. sends and receives data through radio waves. Like a GSM mobile phone, a GSM modem requires a SIM card from a wireless carrier in order to operate. GSM modems can be a quick and efficient way to get started with SMS GSM modems are a cost effective solution for receiving SMS messages. Security Time saving Cost saving Uses Availability Effectiveness Reliability GSM Technology has changed the living standard of human being. In current era almost every one is using GSM Mobile. Implementation of GSM Technology has changed working style of the industry. And now it is used widely almost in the every where. Thanks