description concerning Plug and Play? a) When a peripheral device is connected to a PC, the installation and settings of the device driver are performed automatically. b) Software for enhancing the functions of application software is installed at a later time. c) Power is supplied from a PC to a peripheral device via a cable connecting them. d) A specific program is executed, and the system performance is evaluated on the basis of the time taken for the execution Answer:
A) When a peripheral device is
connected to a PC, the installation and settings of the device driver are performed automatically. Q10: Explanation Plug and Play - When a peripheral device is connected to a PC, the installation and settings of the device driver are performed automatically. Application Software - Software for enhancing the functions of application software is installed at a later time. Q10: Explanation Computer Port - Power is supplied from a PC to a peripheral device via a cable connecting them. Computer Performance - A specific program is executed, and the system performance is evaluated on the basis of the time taken for the execution Q11 Which of the following is a characteristic common to IEEE 1394 and USB that are often used for connection interfaces between PCs and peripheral devices? a) Peripheral devices can be connected and disconnected while the PC and/or devices are powered on. b) A maximum transfer rate is 100 Mbits/second. c) A unique ID must be assigned to each device connected to a PC. d) Data can be transmitted in parallel over multiple data lines. Answer:
A) Peripheral devices can be
connected and disconnected while the PC and/or devices are powered on. Q11: Explanation A. Both are peripheral devices that can be connected and disconnected anytime B. USB's can exceed 100MBps transfer rate C. USB's can be named however the user wants D. Data Transmission - Data can be transmitted in parallel over multiple data lines. Q12 Which of the following is an appropriate combination of words that are inserted into blanks A and B in the description below concerning the execution sequence of instructions in a computer? Q12 In a computer, the instructions are executed in the sequence shown below. (1) Refer to the program counter. (2) A the instruction. (3) Set the program counter to the main memory address of the next instruction. (4) B the instruction. (5) Execute processing according to the instruction. (6) Return to (1). ANSWER: B Q12: Explanation Decode - The conversion of an encoded format back into the original sequence of characters. Read - To acquire data from a source and place it into their volatile memory for processing. Write - The process of taking information and moving it to an alternate location Members:
Baguna, Allan T. Roman, Keidran A. Travilla, Earl Floyd