Beruflich Dokumente
Kultur Dokumente
12/15/2019 2:10 AM 1
Definitions
12/15/2019 2:10 AM 2
Definitions
12/15/2019 2:10 AM 3
Definitions
12/15/2019 2:10 AM 4
Definitions
12/15/2019 2:10 AM 5
Functions of Paints
Paints
Heat Chlorinated
Fireproof Luminous
Resisting Rubber
Paint Paints
Paint Paint
12/15/2019 2:10 AM 7
Classification of Paints
Paints
12/15/2019 2:10 AM 8
Types of Paints
12/15/2019 2:10 AM 9
Types of Paints
• Emulsion paint: It consists of polyvinyl acetate and
synthetic resin as binding material
• Enamel paint: It consists of white lead ground in small
quantity of oil and mixed with petroleum spirit and
resinous matter
• Graphite paint:
• Luminous paint: contains calcium sulphide with varnish
• Silicate paint: prepared by mixing calcined ground silica
with resinous substances
• Anti-corrosive paint: consists of oil and strong drier
• Plastic paint:
• Synthetic rubber paint: prepared from resin
12/15/2019 2:10 AM 10
Composition of Oil Paints
• White lead
– Cheapest and most commonly used base
– Greater covering power than all others
– Dense so good to obscure surfaces
– Weathers well
– Not suitable for delicate works as gets
discolored
– Not suitable for painting of iron work due to
rusting
12/15/2019 2:10 AM 13
Composition of Oil Paints - Base
• Red lead
– Sticks well and protects against rusting. With
oil considered best for first coat or prime coat
– Good drier for linseed oil
• Lead paints are poisonous. Precautions
needed while spraying or scrapping paint
12/15/2019 2:10 AM 14
Composition of Oil Paints - Base
12/15/2019 2:10 AM 15
Composition of Oil Paints - Vehicle
12/15/2019 2:10 AM 16
Composition of Oil Paints - Vehicle
12/15/2019 2:10 AM 17
Composition of Oil Paints - Vehicle
12/15/2019 2:10 AM 19
Composition of Oil Paints - Thinner
• Inert filler
– An adulterant mixed to replace the base in
part thus reducing the cost of paint
– Commonly used fillers are silica, charcoal,
powdered chalk, aluminum silicate, barium
sulphate, etc
12/15/2019 2:10 AM 22
Characteristics of Good Paints
• Should have a good body or spreading power
• Should work smoothly and freely to be laid in thin coat
• Should form durable, tough and wear resistant film upon
drying
• Color should not fade or change
• Painted surface should dry in about 9 hours
• Should become hard enough in 24 hours to take up
another coat
• Should not crack upon drying
• Should give a smooth and pleasing finish
• Should dry quickly
• Should not damage the painted surface
12/15/2019 2:10 AM 23
Manufacture of Oil Paints
12/15/2019 2:10 AM 24
Manufacture of Oil Paints
12/15/2019 2:10 AM 25
Defects in Painting
12/15/2019 2:10 AM 28
Defects in Painting
• Slow drying:
– use of inferior or old oils
– Painting over damp surfaces
– Painting during unfavorable weather
• Yellowing of white paint:
– Use white enamel where gloss is desired
– For indoors use linseed oil with yellow tint that
does not bleach unless exposed to sunshine
12/15/2019 2:10 AM 29
Questions ???
12/15/2019 2:10 AM 30