Beruflich Dokumente
Kultur Dokumente
For
Printing Inks
Speciality Minerals for Printing Inks
Calcium White
Matting Rio-bent Wax BARIUM
carbonate Kaolin Pigment SULPHATE
Agent Series Series
series Opacifier
CaCo3 Series
CALCIUM
CARBONATE Excellent Opacity & Gloss
SERIES Efficient Extender
Easily Dispersible
( Opacifier ) High Brightness low yellowness
1. Calcium carbonate series
Fine Coated CaCo3 Grades have following Advantages :
• Extension of heat set inks & replacement of costly resin while maintaining
acceptable gloss and water balance.
Key Benefits :
• Outstanding dispersion properties in water and solvent based printing
inks.
• Increase the spread and fast drying/ absorption.
• Spacing of Tio2 and colour pigment.
• Efficient extender to white pigment.
• High brightness and low yellowness.
Different Grades of CaCo3
Properties Units O CARB T VAPORLITE 90 VAPORLITE VAPORLITE 120
(superfine) (Sub-Micron) 90CTD(Coated) (Sub-Micron)
Brightness % 95 ± 2 92±2 92±2 92±2
Bulk Density gm/tr 520 ± 30 350 ± 50 400 ± 50 400 ± 50
• Matting agents are additives that enhance the performance of Inks and
coatings. They create a micro-rough surface. This facilitates to diffusely
reflect the incident light on it, thus creating an impression of low gloss. The
particles are evenly distributed in the film.
2.Matting Agent :FMSIL Series
FMSIL is high performance sol-gel silica developed for variety of ink application
in printing ink, paint and coatings to achieve matt finish.
Overprint varnishes and printing inks. : Surface treated matting agent suitable
for solvent based printing inks, easily dispersible and high clarity product.
FMSIL has outstanding suspension behavior and suitable for use in pigmented
coatings and also use in clear coats.
Wax Emulsion : Non –Ionic Emulsion, Based on Parafin Wax, PE Wax & Blended
additives.
Provides hydrophobic effect and improves antiblocking.
Increase surface slip, Scratch resistance, abrasion resistance.
It provides soft feel effect
Specialized Low Flow Wax Good Hardness, 107 - 0.5-2.0 % Offset UV Ink
Molecular wax High Melting Point,
Scratch Resistance,
High Gloss
The refractive Index of LC Pigment is around 2.1 which are slightly lower than Tio2 (2.7).
LC Pigment works fundamentally in both ways as an individual opacifier and also act as spacer
for prime pigment mainly for Tio2.
Opacity with
90% TiO2 high Gloss
Replacement Resistance to
yellowing
Excellent
Excellent Optical
Dispersibility Properties.
Cost effective
LC 80 PIGMENT (Specification)
Brightness % 94-97
Whiteness % 96-99
Bulk Density (Loose) gm/liter 450-550
Oil Absorption gm/100gm 20-30
PSD-D(50)-50 Particles Below µ 0.4-0.6
@ Malvern
Guideline Formulation:
Residue (200 Mesh) % Max 2.0 Max 2.0 Max 2.0 Max 1.0
Moisture( @105°C) % Max 3.5 Max 3.5 Max 3.5 Max 2.0
L.O.I (@100°C) % Max 30.0 Max 30.0 Max 30.0 33.5± 1.5
4.Riobent Series
RIOBENT Grades and its Application :
Ultrafine Kaoline, with a particle size between 0.2 and 0.5 µm, is the most effective at
maintaining an ink formulations gloss.
Brightness % 84 ± 2 85 ± 1 88 ± 2
KEY BENIFITS:
Brightness % 93 ± 3 93 ± 3
Bulk Density gm/lit 1200 ± 30 1070 ± 50
Oil Absorption gm/100gm 10 ± 3 12 ± 3
pH (10% Aq. Slurry) - 9±1 9±1
Particle Size Analysis