Beruflich Dokumente
Kultur Dokumente
To enhance Dealer Support team’s capability to render high level support for
Telephony related issues.
Table of Contents
Chapter Contents
1 KX-HTS824BX Basic Specification & Function
2 Basic Configuration
3 KX-HTS824BX IP Features
4 Web Programming & Basic Call Features
5 Initial Setup
6 Installation and Initialize
7 Web Maintenance Console
8 HDV Phone Registration
9 CO Line Connection
10 KX-HTS824BX IP Configuration
11 Basic Call
12 Voice Mail and Gmail
13 Email with Voice Mail
14 KX-NTV Series Phone Registration
15 SIP Softphone Registration
16 Configure PBX to PBX via SIP Trunk
Chapter I
KX-HTS824BX Basic Specification & Function
Panasonic System Solutions Group
Systems Engineering Team
Note: SLT and Smartphone integration are not supported for Paging. Also, KX-HTS does
not support audio port for paging.
SIP Trunk Information Carrier
PBX to PBX Connection via SIP Trunk
KX-HTS824BX Security Features
Chapter IV
Web Programming & Basic Call Features
Panasonic System Solutions Group
Systems Engineering Team
No = KX-HTS does not support this feature for SLT. KX-TES supports
this feature for SLT.
Transfer and Hold a Call
KX-NS/NSX PBX does not support DSS key and CO key for KX-HDV phones.
Other Features
Voice Mail Language
Chapter V
Initial Set-up
Panasonic System Solutions Group
Systems Engineering Team
Note: There are two types of HDV Phone registration, one is plug & play and second one is manual
registration. In order to use manual registration, you need to disable the force assignment to SIP
port.
Register KX-HDV to desired extension
Configure the Username & Password
Enable Video Call for KX-HDV430
Enable Automatic Video Call
Compatible IP Camera for KX-HDV430
Connect Fax for SLT: SLT Phone Only
Adjust the SLT Flash Time: SLT Phone Only (Ghost Call)
Chapter IX
CO Line Connection
Panasonic System Solutions Group
Systems Engineering Team
Make a test call from Extension 103 by dialing extension 110 which is connected to CO 1 port
KX-HTS824BX
110 CO1
Input leading digits number ”2” and select Deny on TRS level (COS) 2 then click Apply. This means that
all phones which assigned to TRS Level 2 cannot call leading digits number 2.
Configure the TRS levels of the Phones
Select extension 101 and change the TRS Level (COS) Day into 2 and select extension 109 and change
the TRS Level (COS) Day into 1. This means that 101 cannot call leading digits 2 but 109 can call leading
digits 2.
Emergency Call
Chapter XII
Voice Mail and Gmail
Panasonic System Solutions Group
Systems Engineering Team
http://www.counterpath.com/bria/
Step 5 : Install Bria (SIP video software phone). SIP video software
phone by Bria
Ext 301
Installation Wizard
Web Based Log - in
Set up SIP Registration
Setup Call Destination
Setup Call Destination
How to use?
Start Talking without Dialing
Enable Video Call
Firmware Upgrade for KX-NTV Series
Chapter XV
SIP Softphone Registration
Panasonic System Solutions Group
Systems Engineering Team