Sie sind auf Seite 1von 18

CWDM Redundant ring FO Connection

(Using FibroLan’s ATARA -100)

2 Redundant FE in each
location

CWDM CWDM

Atara-100
TP FE Sw.
TDM Mobile Backhaul with Data Expansion
(Protected Ring)
• Provide dedicated TDM (T1/E1 support for backhaul) over a fiber infrastructure –
not shared bandwidth.
• Ethernet expansion - 10/100
• Provide environmentally hardened platform for remote cabinet deployments
• Protected ring support.
Guaranteed Bandwidth
Wavelength Services

Wavelength services:
T1/E1 fed mobile stations
Integrated 10/100 Ethernet
backhaul for data services

WDM Optical Ring


With Optional Protection
CWDM Redundant ring FO Connection
(Using Third Party 10/100/1G/10G Sw)
CWDM
SFP
Module
Ethernet Over N*E1 PDH Backhaul
(Inverted Mux Solutions)
Open Access (TDM Bundling)
5*FE

8*E1 8*E1 8*E1 8*E1 8*E1

PDH/SDH

F.Eth.
FibroLAN
Proxima
SNMP/IP drawbacks in a large
scale Metro Access infrastructure
• SNMP systems poll the managed objects
– Long response time
– I increasedd volume of network management traffic.
– Long polling delays – Impratical to monitor links in real time
• UDP is transmission protocol
– Not a guaranteed delivery mechanism
– Messages are not acknowledged
• SNMP assumes that the underlying IP network is operational
– But… you need management functionality even more when the
underlying network is non-operational
• Requiring IP network to run just to manage the network could be an
unacceptable overhead in term of the complexity of the equipment
and operational carrier network
– Every ONT/NTU device requires IP address.
7302
• 18 slots
• 48-port VDSL2 line card
• 16-port F.Ethernet line card for Active
Ethernet point-to-point fiber
• 8 GigE interfaces
n FE

7302 ISAM UD
n GigE
Ubiquitous
7330 ISAM broadband
IP based Ethernet/ DSLAMS
service
7330 ISAM
ISAM Host offering
Horsepower to deliver IPTV
services
n GigE

7450 ESS n GigE


7750 BSR
Ethernet switch n GigE 1 GigE

7330 SEM
7302
288 100BFx
7GE FO
FibroLAN
OAM
Transport/Data-Link Layer OAM
• IEEE 802.3ah, focuses on the access link (first/last
mile) of native Ethernet access networks.
• Link monitoring Gives the Service Provider
visibility of the first mile physical connection through
periodic heartbeat messages. In case of any issues
on this link, the Service Provider is immediately
notified with pertinent information.
• Fault signaling Enables a device to convey to its ITU Y.1731 and MEF
peer at the remote location that severe conditions Services
such as link failure (noted because it can no longer
receive any signal) or a dying gasp (when the remote
device is about to be powered down and
operationally unavailable) have occurred. IEEE 802.1ag, ITU and MEF
• Remote loopback Enables a loopback to be Connectivity
initiated from one entity to a remote peer entity to
ensure the quality of the intervening Ethernet circuit
(specific tests for delay, jitter, and so on, can also be
measured). EFM
• MIB variable retrieval Provides a management IEEE802.3ah
information base (MIB), which is a database of Transport/Link
management variables and typically includes all
performance and error statistics maintained on an
Ethernet link.
• Vendor Specific Extensions : Allows equipment
vendors to extend Ethernet OAM capabilities through
organizational-specific PDUs to support additional
capabilities beyond one link and monitoring to other
equipment performance parameters.
FibroLAN’s ‘Smart’ Demarcation?
End-to-end traffic management and service control

Customer Premises POP

Demarcation Device Edge


Customer Device
Ethernet Provider’s
Equipment
GbE UNI
Network

Customer’s Network Provider’s Network

• Carrier owned, customer located equipment


• Clear demarcation between provider’s and Customer’s networks – quickly
determine responsibility of service affecting problems
• End-to-end Ethernet OAM – allow for end-to-end fault management and
performance monitoring
• Traffic management starting at customer premises – essential for
guaranteeing end-to-end SLA
• Extensive fault monitoring and diagnostics tools – Opex minimization
MetroStar Product Family
(NTUs)
MGMNT
MetroStar
Chassis

MetroView
SNMP Management
Platform

HCON/MA FCON1/MA GSM1010/MA GSM1000/MA GSM1000X/MA


10/100 TX-FX 100 TX-FX 1000 TX-FX 1000FX-FX 1000SFP to SFP
converter/Access device converter/Access device converter/Access device converter/Access device converter/Access device

LTA41/MA GTA8200/MA Atara1000/MA Atara1000RM/MA


4*(10/100 TX)-100FX 8*(10/100 TX)-2*1000SFP 2*(1000 TX)-2*1000FX 2*(1000SFP)-2*1000SFP
Access Aggregator device Access Aggregator device Access redundancy device Access redundancy device

PCM110-4/8E1
LTA41-4E1/MA GTA82004E1/MA FALCON
8E1-100BTx
4*(10/100 TX+4E1/T1)-100FX 8*(10/100 TX+4E1)-2*1000SFP 8*(10/100/1000 TX+8E1/T1+8*1000SFP
Inverse Mux
Access Aggregator device Access Aggregator device Access Aggregator device
MetroStar Product Family
(Modules)
IEEE 802.3ah Ethernet in First Mile

• Focused on point to point Ethernet link OAM


– Does not propagate beyond the link
• Discovery
• Remote failure indication
– Dying gasp, link fault & critical event
• Remote loopback
• Performance monitoring and threshold crossing
alarms
• Utilizes a “slow” protocol
• OAM/PDUs identified by MAC address and
Ethernet Length/Type/subtype field
• Uses a protocol sub layer between physical
and Data link layers
MetroStar OAMP

Demarcation
& visibility at
hand-off
Demarc owned
points
by Carrier A
Demarc owned
by Carrier A

SNMP Mgmnt 1000BT


Collocation Fist Mile - CPE
Demarcation Demarcation
Device
POP 1 Carrier A POP Carrier B Customer Premise
Co-Lo

Demarcation devices at carrier-carrier & carrier-customer handoffs


Carrier A has visibility through carrier B to customer premise
Enables quick problem detection & resolution
OAMP end to end and over carrier domains
IEEE802.3AH Over 2 party FO nd




Operator
F/O Link Status
T/P Link Status and changes
Fiber Link Integrity:
continuous (every 10msec)
verification of the fiber link
• Loop-Back test (Non
Intrusive!) and Extended

Service Provider
Provider End-to-End Metrics

Collocations
Operator Metrics

Operator A Operator B
Demarcation

• Loop Back (ELB)


• Power On Customers
• Set A/N mode Premises
• Set data rate: Allows forcing
• Set Fault Propagation • Rate Limiting: from
10 or 100 or 1000Mbps onto
(FO>>TP) 256K to 1000Mbps
the TP port. • Remote Firmware
• Subscriber Link
• Set Duplex mode Emulation (SLE) upgrade
• Set Flow Control (Pause) • Last Gasp • Statistics
IEEE802.1AG Over 2nd party FO
Infrastructures
Demarcation units in collocations and customers’ demarcations
are
owned by Service Provider

Service Provider
Collo.
Provider End-to-End Metrics

SNMP
Operator A /IP
Operator Metrics

Collo.
Operator Metrics

Operator B

Demarcation Customers
Premises

Das könnte Ihnen auch gefallen