Beruflich Dokumente
Kultur Dokumente
SUBMITTED BY:(1) Pradeep jhariya Roll no. 0202EC091072 (2) Shivam kushwaha Roll no. 0202EC091099 (3) Sandeep Tamrakar Roll no. 0202EC091090 (4) Sunil Rajak Roll no. 0202EC091108
CONTENTS
1 INTRODUCTION 2 TYPES OF LIQUID COOLED PC 3 LIQUID COOLED CPU 4 USE OF MICRO CHANNELS 5 ADVANTAGE 6 DISADVANTAGE 7 CONCLUSION
INTRODUCTION
Liquid cooling is a method of heat removal
from component as opposed to air cooling water is used as the heat transmitter. Using water cooling over air cooling include waters higher specific heat capacity, density& thermal conductivity.
The third option for those who wish to keep their existing PC case is an external liquid cooling system. In this type of system the radiator, reservoir and pump are housed externally in a separate unit. The liquid coolant is pumped into the PC case, and a return line pumps the heated coolant out of the case and into the reservoir. The benefit of the external system is that it affords the interior working space of an integrated system with the ability to adapt to use with any PC case. It also allows for a large radiator and more cooling power than the average integrated setup.
ADVANTAGES
Liquid cooling is a much more efficient
system at drawing heat away from the processor and outside of the system. This allows for higher clock speeds in the processor as the ambient temperature of the CPU. It has been able to almost double processor speed by using liquid cooling solution the other benefit of liquid cooling is the reduction of noise within the computer
DISADVANTAGES
The prominent disadvantage are size and
technical skills required to install kit. if the system is not properly installed, leaks could cause severe damage to the components inside system. there is also possibility of injuring to the individual installing system into the computer.
CONCLUSION
Liquid cooling is becoming well within the grasp
of common enthusiast. Todays liquid cooling system like EXOS-2 are very simple to set up and are essentially plug and play compared to the old-school method of jury-rigging spare plumbing parts. And with illumination and stylized enclosures, modern liquid cooling kits can look great, to boot.
THANK YOU