Beruflich Dokumente
Kultur Dokumente
A Love Story
Jan 28 2010
HyperTerminal
Launch HyperTerminal from the start menu: START Menu->Accessories>Communications>Hyperterminal or: Run:// hypertrm You must create a new connection by giving it a name. Its a feature
Jan 28 2010
HyperTerminal
9600, 8, N, 1, N
Default for AW products and cannot be changed. Crestron programmers may use the above lingo.
Jan 28 2010
HyperTerminal
By default, characters that you type will not be visible on screen. It is easy to change this.
Jan 28 2010
HyperTerminal
There are no spaces in the commands, and there is no need to press enter A response is returned as soon as the product interprets a command, even if the command is not valid. There is no space between the sent command (1cn) and the received response (E10). Try the ? command. This will return a code representing the type of device ie: DEV67 for TetraVio. (E10) is the response for an invalid command
Jan 28 2010 Analog Way - ARL 5
Example
Description Preview input 3 Perform transition. Input 3 appears on main. Input 3 is currently on Main
Jan 28 2010
description
1,2,7IN
IN1,2,7
TA 1TK
TA1 means ready to take. TA0 means not ready. Perform transition. Input 7 appears on main.
Jan 28 2010
description
DVI input1 in the Live Background Layer on the preview screen (next preset)
TA 1TK
TA1 means ready to take. TA0 means not ready. Perform transition. DVI 1 appears on main.
Jan 28 2010
Key Points
External Control of AW products is very easy. Control commands work just like operation from front panel. Expect to use preview+take, just like operation from front panel. Anything available from front panel can be done with Serial/LAN control. Most products have code list at end of manual, but MMS and DVXII have 2 accompanying documents, a lengthy document with all of the codes, and a quickstart guide with examples. Tech Support is here to help!
Jan 28 2010 Analog Way - ARL 9