Beruflich Dokumente
Kultur Dokumente
Molecular spectroscopy may be defined as the study of the interaction of electromagnetic Waves and matter
What spectroscopy can tell us of the structure of matter Nature of electromagnetic radiation
How the interaction of electromagnetic and matter is occurred
Frequencies: are always expressed in Hz (after Hertz) with the unit 1/second ("cycles" is derived from Hz and only used for cyclic movements. In one second how many cycle is travelled.
Wavelengths are expressed in different units. (The distance travelled during a complete cycle) (ngstrom, 10-10 m) is common for short wavelengths: g-rays, Xrays, up short wavelength UV ("vacuum UV") nm (10-9 m) is common for UV-Vis (350 nm - 800 nm) cm are used for microwave spectroscopy.
Energies are expressed in different units. eV (electron volts) for atomic spectroscopy, photoelectron spectroscopy, mass spectroscopy, 1 eV is the energy that an electron acquires after passing through a voltage difference of one volt.
E = E2 - E1 = hn
(joules)Where n is the frequency of the light photon absorbed
**infra-red inactiv **
Antisymmetrical stretch,
there is a periodic alteration in the dipole moment,
infra-red active**
Exercise
1- What is the role of Spectroscopy? 2- Define and\or characterize:Molecular energies, light, Quantized energy, IR-active molecule. 3- Arrange the following spectral regions according to increase in energy (start with smallest), Radio wave, xrays, visible rays, Which region can only produce n.m.r spectra? 4- Show by diagrams only how a vibrating molecule can interact with light
Homework
Representation of Spectra
Generally, the spectral band is characterized by position, width, and intensity.
The position of the spectral bands, or the frequencies at which the molecule absorb, depends on its structural features ( Functional group) as well as on its environment.
** The two most important features of spectral lines are:their height (~ intensity) and their width (n).
I- Width
There are two factors cause the width broadening
1-
A crucial question that arises with any spectroscopic technique is the question of how well we will be able to resolve two different spectral lines
2- Collisions thus shorten the lifetimes of excited states and lead to the broadening of the associated spectral lines.
b) Doppler Broadening
**
* The frequency that an object emits is modified by its speed relative to the observer (detector).
It is possible to eliminate Doppler broadening by investigating a molecular beam of the atoms / molecules and placing the detector at a 90 deg angle to the direction of the beam.
II- Intensity
1- Transition Probability :The precise calculation of transition probabilities is involved and requires quantum mechanics. However, it is often possible to predict if a transition is symmetry allowed or forbidden. We will discuss the respective Selection Rules for each spectroscopic technique individually.
2- Population of States:For thermal equilibrium, the probability of a state in thermal equilibrium is given by the Boltzmann Distribution: Nupper / Nlower = exp(-E/kT)
3- The Concentration or path length of the sample (Lambert-Beer's Law ) -log [ I/Io] = c e l
LASER
Properties of Laser Light Laser light differs in many aspects from ordinary light (that is: the light generated by light bulbs or fluorescent tubes). Laser light is 1- Monochromatic The range of frequencies emitted by a laser is very narrow,typically Dn / n = 10-5 to 10-8. 2- Low Divergence Laser beams can not only be focused to a smaller point than any other light source (ca. 1 l), but the also show very small divergence. Under optimum conditions, the divergence can reach the theoretical limit of f = l / d 3- Coherent The maxima and minima of all emitted wavelets occur at the same position. 4- Highly Intense Pulsed lasers can generate light pulses of extremely high intensity. For example, commercially available Nd:YAG lasers (l = 1064 nm) are capable of 10 ns pulses with an energy of 108 W. This corresponds to an energy of 1020W / m2 at the focal point - 1017 (!) times more intense than the sunlight at the earth's surface. 5- Polarized The E-planes of the individual light waves are all parallel to each other. 6- Precisely Timed The ability to create incredibly short laser pulses (currently: 4 femtoseconds = 4 fs = 4 x 10-15 s) allows the spectroscopic resolution of extremely fast processes. A 4 fs pulse in the visible corresponds to only 2 cycles of the corresponding sin wave.