Beruflich Dokumente
Kultur Dokumente
Spinal Bend
Wrap
OptionsTab
MarqueeTab
Transform Button
Figure F The preview of the translated feature with the original feature
Figure I The preview of the original geometry with the scaled geometry
Warp Button
Bend Button
Twist Button
Sculpt Button
Tutorial 1
In this tutorial, you will create the model shown in Figure A. You can assume any dimensions for this tutorial. (Expected time: 30 min)
1.
Create the blend feature. The model, similar to the one shown in Figure B, is displayed in the drawing area.
Figure B Isometric view 2. Create the revolve feature. The sketch for the revolve feature is shown in Figure C. The model after creating the revolve feature, is shown in Figure D.
3.
Create the round feature on the two ends of the blend feature. The model, similar to the one shown in Figure E, is displayed in the drawing area.
Create the shell feature on the front face of the model. The model, after creating the shell feature, is shown in Figure F.
4.
5.
Create the warp feature using the Start the spine tool button. Figure G shows the sketched spine for the warp transformation. The model similar to the one shown in Figure H is displayed in the drawing area. The position of the control points after the deformation is carried out is as shown in Figure I. The model after warp transformation will appear as shown in Figure J.
Figure I Figure showing the deformed model 6. Save the model and close the window.
Tutorial 2
In this tutorial, you will create the model shown in Figure A. Assume the dimensions of the model. (Expected time: 30 min)
1.
Create the revolve feature. The sketch for the revolve feature is shown in Figure B. The model, after completing revolve feature is shown in Figure C.
The model after creating the shell feature, appears as shown in Figure D.
3.
4.
The model after patterning the extruded feature appears as shown in Figure E.
Create the round feature. The model, after creating the round feature, is shown in Figure F.
5.
Create the warp transformation by using the Start the twist tool. The model, after creating the warp transformation, is as shown in Figure G.
6.
Tutorial 3
In this tutorial, you will create the model shown in Figure A. Assume the dimensions of the model. (Expected time: 30 min)
1.
Create the extrude feature. The sketch for the extruded feature is shown in Figure B. The model, after creating the extrude feature, is shown if Figure C.
2.
Create the second extrude feature which is a cut. The sketch for the extrude feature is shown in Figure D. The model, after creating the extrude feature, is shown in Figure E.
3.
Create the tread as third extrude feature, and pattern it. The sketch for the extrude feature is shown in Figure F. The model, after creating the pattern of the extruded feature, is shown in Figure G. Mirror the tread pattern on the other side. The model, after creating the mirror, is shown in Figure H.
4.
Create the toroidal bend feature. The sketch for the toroidal bend feature is shown in Figure I. The toroidal bend feature is created and the model similar to that shown in Figure J is displayed in the drawing area.
5.
Create the round feature, refer to Figure K. Also, change the color and appearance of the model, refer to Figure L.
Figure K Model showing the edges selected for creating the round feature 6. Save the model and close the window.