Uploads by 320338

ASME B1.30-2002

MIL-HDBK-400 Criteria for Preparation of Gear and Spline Engineering Drawings

Airman Navedtra 14014

Dressing for Altitude US Aviation Pressure Suits by Jenkins (NASA)

实用热处理手册

Jjg 707-2014 扭矩扳子检定规程

V2N3 --- Nuts Bolts Screws

MIL-H-6875H-AMD-2

MIL-H-6875H-AMD-1

MIL-H-6875H Heat Treatment of Steel, Process for (SS by SAE-AMS-H-6875)

ASTM MNL 2 Manual on Vapor Degreasing 3rd Edition

ASTM MNL 2 Manual on Vapor Degreasing 3rd Edition

MIL-HDBK-6870B Nondestructive Inspection Program Requirements for Aircraft and Missle Materials and Parts.pdf

AC 43.13-1B Section 5 Penetrant Inspection.docx

Lifecycle Information of Aircraft Engine Maintenance

14 CFR 43.16 (2011) Airworthiness Limitations

NCSLI Measure --- Vol.7 No.3 (Sept 2012)

AIA-NAS NAS443 Nut - Self Locking Internal Wrenching Rev 1

41 CFR 102-33 (GSA) Management of Government Aircraft (Life Limited Parts)

P548 Navy ILS Handbook

p719 Naval Smr Code

EURAMET.M.T-S3

A Guide for Choosing the Right Calibration for Torque Transducers

NAVEDTRA 14218 Aircrew Survial Equipmentman 2

IEEE Std 260.1-2004 Standard Letter Symbols for Units of Measurement

UH60A T700 Engine

ASME B107.300-2010 Torque Instruments

Aircraft Electronics Technician (AET) Study Guide

MIL-STD-413C Visual Inspection Guide for Elastomeric O-Rings

MIL-STD-413C Visual Inspection Guide for Elastomeric O-Rings

Navedtra 14014a Airman

Pocket Guide --- Tightening Technique

Aircraft Wiring Degradation Study

MIL-DTL-81748E-AMD-2 Manuals, Technical --- Rapid Action Changes and Interim Rapid Action Changes - Preparation of - General Specification For

Safe T Cable