Beruflich Dokumente
Kultur Dokumente
SIMATIC
SIMATIC IOT
SIMATIC IOT2020, SIMATIC IOT2040
A5E37656493-AB
09/2016
Expand device
Gert erweitern
Horizontal/
horizontal
50 C
Vertical/
vertikal
0 C
0 C
When the device is used in the area of Industrial Control Equipment in accordance with
UL610102201, note that the device is classified as "Open Type". A UL610102201 conform
enclosure is therefore a mandatory requirement for approval or operation according to
UL610102201.
Beachten Sie beim Einsatz im Bereich Industrial Control Equipment entsprechend UL610102201,
dass das Gert als "Open Type" klassifiziert ist. Voraussetzung fr die Zulassung bzw. den Betrieb
nach UL610102201 ist deshalb der Einbau des Gerts in ein der UL610102201 entsprechendes
Gehuse.
Free space required around the device - Erforderlicher Freiraum um das Gert
50 mm
50 mm
50 mm
50 mm
3
Click!
10
Wall mounting / Wandmontage
1
POWER
OFF
DC 9
...36 V
Po we
r
Supp
ly
2
4
https://support.industry.siemens.com
1
POWER
ON
DC 9
...36 V
Po we
r
Supp
ly
PWR
Illustrations
This document contains illustrations of the described devices and accessories.
The illustrations may deviate from the particularities of the delivered device and accessories.
Abbildungen
Das vorliegende Dokument enthlt Abbildungen zu den beschriebenen Gerten und Zubehr.
Die Abbildungen knnen bezogen auf das gelieferte Gert und Zubehr in Einzelheiten abweichen.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and
software described. Since variance cannot be precluded entirely, we cannot guarantee full
consistency. However, the information in this publication is reviewed regularly and any necessary
corrections are included in subsequent editions.
Haftungsausschluss
Wir haben den Inhalt der Druckschrift auf bereinstimmung mit der beschriebenen Hard- und
Software geprft. Dennoch knnen Abweichungen nicht ausgeschlossen werden, so dass wir fr die
vollstndige bereinstimmung keine Gewhr bernehmen. Die Angaben in dieser Druckschrift
werden regelmig berprft, notwendige Korrekturen sind in den nachfolgenden Auflagen
enthalten.
Siemens AG
Division Digital Factory
Postfach 48 48
90026 NRNBERG
Siemens AG 2016. All rights reserved
A5E37656493-AB, 09/2016