Beruflich Dokumente
Kultur Dokumente
Characteristic Functions… … … … … … … … … … … … … … … … … … … … … … … … … … … … … …1
Important Safety Instructions…………………………………………………………………………1
Technical Specifications… … … … … … … … … … … … … … … … … … … … … … … … … … … … … …3
The Technical Specifications for Final Product… … … … … … … … … … … … … … … … … … … … …3
Technical Specifications for TV…………………………………………………………………………4
VGA Display Mode………………………………………………………………………………………4
Power Management………………………………………………………………………………………4
Packing Listing……………………………………………………………………………………………4
Installation & Connection………………………………………………………………………………5
Base Assembly Installation………………………………………………………………………………5
Antenna Connection………………………………………………………………………………………5
Power Connection … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … …6
Computer Connection ……………………………………………………………………………………6
HDMI Digital Port Connection … … … … … … … … … … … … … … … … … … … … … … … … … … … …6
AV Video Signal Connection… … … … … … … … … … … … … … … … … … … … … … … … … … … … …6
AV Output Connection……………………………………………………………………………………6
YPbPr/YCbCr Input Connection…………………………………………………………………………6
Position of Control Keys ………………………………………………………………………………7
Remote Control……………………………………………………………………………………………7
Basic Operation Instruction… … … … … … … … … … … … … … … … … … … … … … … … … … … …8
Power On…………………………………………………………………………………………………8
Standby……………………………………………………………………………………………………8
Signal Source Selection…………………………………………………………………………………8
Menu Operation Instruction… … … … … … … … … … … … … … … … … … … … … … … … … … … … …9
PICTURE…………………………………………………………………………………………………9
SOUND……………………………………………………………………………………………………10
OSD………………………………………………………………………………………………………10
TV…………………………………………………………………………………………………………11
Hotel Function(optional)……………………………………………………………………………………11
USB Signal Source Operation… … … … … … … … … … … … … … … … … … … … … … … … … … … …12
Simple Troubleshooting …………………………………………………………………………………15
1. LCD panel with no glint and low radiation can ease eyes' fatigue and protect eyes.
2. High-quality LCD with LED backlight panel is adopted with high brightness, high contrast, wide
viewing angle, and super fast response time. Super fast response time can greatly eliminate the
shadow of moving images.
3. TV/Monitor with two in one and multiple input ports can easily switch among the modes.
4. De-interlacing image disposal is adopted. Today's most advanced technique for movement
compensation, can completely improve the saw tooth and vague edges of the athletic picture.
5. There are four smart sound modes and four smart image modes.
6. Dynamic contrast technology can obviously improve the definition and contrast of the picture
7. Tuner for frequency synthesis can support full auto search and manual search.
8. With perfect timing function, you can set time to turn off. It will be turned off in state of no signals,
too.
9. Auto Adjustment can help you to setup the image into the best performance in a few seconds
instead of complicated adjustment in PC mode.
10. Auto color balance adjustment technology can make the machine to reach the best color setting
in PC mode.
11. Support hi-definitionYPbPr and HDMI.
12. All functions can be realized with remote control, which is really a convenient operation.
13. Power is designed to save energy.
14. Input ports include VGA, YPbPr, HDMI, CVBS, USB and TV.
15. Output ports include AV.
16. Supports USB interface. USB Support Full HD Streaming media.
● When the following troubles occur, please pull out the plug and call the professional engineers to
repair.
A. The cable or plug is damaged.
B. The product was fallen down or the case is damaged.
C. Obvious abnormal situation occurs. In spite of correct
operation according to the user manual but it still can't work
normally.
D. Some abnormal substances or liquid fall into it.
E. Unusual sound or smell sends out.
● There is high voltage inside the machine but no parts which can
be repaired by users themselves. In order to assure the people's
safety, please do not open the case to repair it by yourself. If it is
needed to repair, please contact qualified engineer to repair.
● Please put this machine in the place of well ventilation, instead
of extremely hot, cool or moist, and direct sunlight.
● The slots on the case is designed to release heat so as to assure that all inside components will
not reach an extra high temperature and can work normally for a long time. Please do not cover
the holes while place it.
● Unless there is good ventilation installation, please do not put
this machine in inlaid device.
● Please do not place it on an unstable position so as to avoid
falling off.
● Do not place the LCD TV near water source, like a bathtub,
pool, washing machine, or moist cellar and similar environment.
● During a thunder rain weather, do not touch the power cord and
antenna cable. Please pull out the power line and aerial plugs
for preventing thunder and lightning damage to this machine.
● All cables can be connected or pull out only after power supply
is turned off.
● The power cord must be taken off before you clean the machine.
Do not use the liquid cleanser or aerosol cleanser. It is
recommended to use a wet soft cloth to clean the machine. Do
not use the alcohol, impregnant or ammoniac liquid to wipe the
screen.
● If you will not use the machine for a long time, please pull out
the power cord. Do not keep the sleeping mode for too long time.
● Read the manual and marking label before using the machine, and keep the user manual for
later use.
● Don't use the attachments which are not recommended by the machine manufacturer as they
may cause hazards.
● The power cord must be placed correctly so as to avoid be trample or crush.
● Please do not make the power socket overloaded or the power cord extended. Otherwise it will
cause fire or electrical shock.
● The LCD panel is fragile and expensive. The surface of the panel is easy to be scratched. Please
do not use the hard thing to knock, press, score the panel. Otherwise it will be harmful for the
panel. The exchange cost is very high.
● All technical specification on this instruction book and outer package are subject to change
without notice. If the instruction book has slight difference with actual operation, please take the
actual operation as standard.
● When the MAINS plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain readily
operable.
● The machine should not suffer from waterdrop or watersplash,
do not place the vessel with water (or other liquids) on it, for
like this it is possibly to cause fire or electric shock.
● The attaching plug should be inserted into the power point completely, otherwise it may cause
spark to bring fire.
● Please do not put candle, ash-tray, incense, inflammables or explosive nearby this machine.
● Please do not stretch into any sharp object, metal or liquid, or touch the signal attachment or the
inner of radiation hole, in order to avoid short circuit and product damage, or possibly causing
electric shock. Especially pay attention when there are children on the spot.
● Please do not use the machine immediately when moving the machine from low temperature place
to high temperature one, or install and use at the place of facing air conditioning, otherwise it may
cause the condensation in the machine, to cause fault.
● Must be careful when moving this machine, avoiding being struck, especially pay attention to
protect the screen part. In addition, if using handcart, must note the injury as the product is
overturned from the handcart because of hard braking, overexerting and uneven ground.
Technical Specifications
Remarks: The base and machine appearance may not same as the picture, specific in accordance
with work order
Antenna Connection
It is better to use outdoor antenna or CATV cable if you want to watch the colorful and hi-definition
pictures. Attention: Please turn off TV power before the outdoor antenna is connected to the
TV signal input port. Outdoor antenna can't be located near the high
voltage cables. Please pull out the plug of outdoor antenna to avoid
thunder shock in thunder weather.
CVBS, DVD Player or other RF
Y Yellow (VIDEO) machine with CVBS/S-Video.
W White(AUDIO-L )
R Red (AUDIO-R)
To power socket
Power cable Y W R
(AC 100-240V, 60/50Hz)
Audio/Video machine
with HDMI interfaces.
Power Connection
Plug one end of the power cord into the input port of the machine's power supply and then insert the
other end into the socket of the electrical source (AC 100V-240V, 60/50Hz).
Notes:
1. When connecting the power cord, be sure to turn
off the machine and other equipment's power.
2. If a long time at leisure, please disconnect it from
power supply
3. This TV must be connected to a three pin socket
outlet for safety.
Please connect one end of VGA cord with the output W White(AUDIO-L )
port of the computer (available for both desktop or R Red (AUDIO-R, Pr/Cr)
laptop computer), and another end of VGA cord with G Green (Y)
B Blue (Pb/Cb)
the input port of the VGA on its rear cover.
R
AV Output Connection W
as shown in the following chart. If you choose the YPbPr/YCbCr signal, please
set signal source selection under YPbPr pattern.
1 2 3 4 5 6
Remote Control
Remote Control Key Instruction
Invalid Key Function
Power POWER Turn on or standby
Mute
MUTE Eliminate sound
Numerical key Number input button
F1 Freeze picture
Numerical key Program list Look through program list
SMART S Intelligent sound mode selection
SMART P Intelligent image mode selection
Program list
Up or Down cursor button: function select;
Cursor key
Smart sound Smart image Left or right cursor button: analog add or reduce
OK
VOL+/VOL- Sound volume add or reduce button
MENU Press this button to display menu
Cursor Key SOURCE Press this button to display signal source selection menu
CH+/CH- Select channel Number
Menu
INFO System information display switch
Time ( ) Timer setting button, press this key can set time of turning down
Volume Channel
Return ( ) Press this button to return to last watching channel
INFO 16:9
Source 16:9 Switch aspect ratio
Info Zoom Color Color temperature mode selection button
Time COLOR P N AUDIO Return
Invalid NICAM(optional) P/N Color system mode selection button
Color Color system
PLAY PAUSE STOP ROTATE
AUDIO(optional) Select NICAM mode
PREV. NEXT REV. FWD. OK Confirm operation
PLAY ( )
PAUSE ( )
STOP ( )
ROTATE ( ) For USB operation
PREV. ( )
NEXT ( )
REV. ( )
F WD. ( )
Power On
Plug power cord into the electrical socket and press '' '' key on the control panel, then press '' ''
key on the remote control to turn on the TV.
Standby
Press ''Power''key on the remote control. TV will be in standby.
★Special Attention:
1.TV set will automatically turn to standby if there is no signal input for 5 minutes when TV turns on.
2.TV set will automatically tu rn to standby when the preset time of turning off reaches.
on the control panel to select what is needed to adjust in Adjust Select Menu:Exit
sort menu.
4. Press ''Left/Right'' key on the remote control or ''VOL+/VOL-''on the control panel to adjust the
value or setting.
5. Press ''Menu'' key to exit the main menu when the TV displays the Main Menu; Press ''Menu''
key to return to previous menu when the TV displays the submenu; Press ''SOURCE'' key to
display the signal source menu or exit signal source menu.
6. During the operation, the selections which can not be adjusted at current mode will be hidden
automatically and the color of the selections will be changed into gray.
7. Menu Operation Instruction in this manual is explained according to TV mode. The operations in
other modes are similar to the one in TV mode. Users can take it as reference.
PICTURE
Select to enter the PICTURE submenu. Press "Up/Down" key on the remote control or "CH+/CH-"
key on the control panel to choose what you need. Press the "Left/Right" key on the remote control
or the "VOL+/VOL-" key on the control panel to adjust analog value or state (see below table).
★Special Attention
1. The Hue function is available only for NTSC system.
2. The value adjusted by user, such as Contrast, Brightness, Hue, Saturation, and Sharpness will
be saved automatically by the machine as User mode.
★Remote Control Shortcut Keys
SMART P: Press SMART P key on the remote control. You can switch the function among the
"Standard", "Soft", "User", "Bright" four modes .
16:9: Press 16:9 key on the remote control, you can switch the mode among the "Full, "4:3",
"Subtitle","Film" four modes.
Option Function Description
Picture Mode Select picture mode "Standard", "Soft", "User," "Bright" four modes.
Contrast Adjust the contrast of whole Increasing analog value increases Contrast;
picture Decreasing analog value decreases Contrast(0-100).
Brightness Adjust brightness and blackness Increasing analog value increases brightness;
of whole picture Decreasing analog value decreases brightness(0-100).
Saturation Adjust the saturation of whole Increasing analog value increases color;
picture Decreasing analog value decreases color (0-100).
Hue Adjust the hue of whole picture Increasing analog value increases green;
Decreasing analog value increases purple(0-100).
Sharpness Adjust the sharpness of whole Increasing analog value increases definition;
picture Decreasing analog value decreases definition (0-100).
SOUND
Select to enter the SOUND submenu. Press "Up/Down" key on the remote control or the key
"CH+/CH-" on the control panel to choose what you need.
Press the "Left/Right" key on the remote control or the
"VOL+/VOL-" key on the control panel to adjust analog
value or state (see below table). Sound Mode Standard
Treble 50
★Special Attention Bass 50
1. Normally, 0 value of adjustment is recommended; Balance 0
Auto Volume Off
2. The treble or bass analog value which is adjusted by
the users will be saved as the User mode by the
machine
★Remote Control Shortcut Keys
Adjust Select Menu:Exit
SMART S: Press SMART S key on the remote control.
You can switch the function among the "Standard", "Music", "Movie", "User" four modes.
MUTE: Open or close sound. VOL+/VOL-: Add or reduce volume.
Option Function Description
Sound Mode Adjust audio effect mode "Standard", "Music", Movie", "User" four modes.
Treble Adjust treble value Increasing analog value increases treble;
Decreasing analog value decreases treble (0-100).
Bass Adjust bass value Increasing analog value increases bass;
Decreasing analog value decreases bass (0-100).
Balance Adjust balance of left or right sound Increasing analog value decreasing left volume;
Decreasing analog value decreases right volume(L50-R50).
Auto Volume Select Auto Volume "On/Off", two states.
OSD
Select to enter the OSD submenu. Press "Up/Down" OSD Language English
key on the remote control or "CH+/CH-"key on the control OSD Duration 60 Second
OSD Transparency 0
panel to choose what you need. Press the "Left/Right" key Blue Screen On
on the remote control or the"VOL+/VOL-" key on the Sleep Time Off
Recall
control panel to adjust analog value or state (see below
table).
10
TV
Select to enter the TV submenu. Press "Up/Down" key on the remote control or "CH+/CH-" key
on the control panel to choose what you need. Press the
"Left/Right" key on the remote control or the "VOL+/VOL-"
key on the control panel to adjust analog value or state Color System PAL
(see below table). Sound System DK
Skip On
Option Function Description Auto Search
Color System Select color system "PAL, NTSC, AUTO" three modes. Manual Search
Sound System Select sound system "I, DK, M, BG" four modes. Fine Tune 45.30 MHz
Skip Select skip or not "Off/On" two states. Channel Edit
Auto Search Select auto search Please refer to "Auto Search"
Manual Search Select manul search Please refer to "Manual Search"
Fine Tune Select fine tune Please refer to "Fine Tune"
Adjust Select Menu:Exit
Channel Edit Select channel edit Please refer to "Channel Edit"
the remote control or ''VOL+'' on the control panel. (In the process of
searching the channel automatically, press the key of ''MENU'' on the Menu:Exit
remote control ,a dialogue of "Do you want to exit searching?" display
on the screen. Press "Left" cursor key to confirm and exit. Press "Right" Manual Search
cursor key to cancel operation and continue auto search). All of the
CH: 1
TV programs will be saved automatically.
Search
Manual Search Frequency 45.25 MHz
Select to enter the submenu of TV. Then press ''Up/Down'' key on
Menu:Exit
the remote control or ''CH+/CH-''on the control panel to select ''Manual
Search''. Then press the key of ''Right'' on the remote control to enter submenu of Manual Search.
Press ''Left/Right'' key on the remote control to select channel No.. Press ''Up/Down'' key on the
remote control to select ''SEARCH'', press ''Left/Right'' key on the remote control again, the machine
begin searching toward low frequency or high frequency. (In the process of searching the channel
automatically, press the key of ''MENU'' on the remote control to
Channel Edit
stop searching).
1 CH
Fine Tune
2 CH
Select to enter the submenu of TV. Then press ''Up/Down'' key
3 CH
on the remote control or ''CH+/CH-'' on the control panel to select 4 CH
''Fine Tune''. Press ''Left/Right'' key on the remote control to 5 CH
adjust from low frequency or high frequency. 6 CH
7 CH
Channel Edit
8 CH
Select to enter the submenu of TV. Then press ''Up/Down'' key 9 CH
on the remote control or ''CH+/CH-'' on the control panel to select
''Channel Edit''. Press ''Right'' key on the remote control to enter 1:Delete 2:Move 3:Skip
OK:Enter Menu:Exit
submenu of ''Channel Edit''
Delete: Press ''Up/Down'' key on the remote control to select channel which you wish delete. Press
"1" key on the remote control, press "MENU" key to return .
11
Move: After select channel, press "2" key on the remote control, then press ''Up/Down'' key on the
remote control to select position where you wish place, then press "MENU" key on the remote
control to return.
Skip: Press ''Up/Down'' key on the remote control to select channel, press ''3'' key on the remote
control to open or close "Skip".
Select Channels with "CH+/CH-" Key
Press ''Channel'' key on the remote control or ''CH+/CH-" key on the control panel to select the
channels.
Select channels with the Return key you can go to the last channel when pressing the Return key.
For example, if the last channel is 10 and the current channel is 20, you will go to channel 10 when
pressing the Return key. You can switch the two favourite channels as you like.
Select Channels with Numeric Keys HOTEL MODE ON
1. Operations to select channels with 1 digit: CH LOCK OFF
Press the number keys on the remote control to select TV channel directly. MAX VOL 100
AUTO SET ON
2. Operations to select channels with 2 digits:
PICTURE MODE STANDARD
Press the number keys with 2 digits on the remote control to select TV POWER VOL 30
channels. POWER SOURCE TV
12
PHOTO
Select to enter the PHOTO submenu. Select
your mobile U disk or hard disk, and press "OK"
key on the remote control to read your photo C:\PICTURE 1 / 11
documents.
Select to return previous menu. Press cursor Return Up Folder 10.jpg 11.jpg
Basic Function
When photos are playing, press "INFO" key on the remote control, a toolbar will display under the
screen(Press "Down" key on the remote control to hide toolbar).
Play/Pause: Press "Left/Right" key on the remote control to select this function, press
"OK" key to play or pause .
Prev.: Press "Left/Right" key on the remote control to select this function, press "OK"
key to read previous photo.
Next: Press "Left/Right" key on the remote control to select this function, press "OK"
key to read next photo.
Stop: Press "Left/Right" key on the remote control to select this function, press "OK"
key to stop playing and return to previous menu.
Repeat: Press "Left/Right" key on the remote control to select this function, press
"OK" key to select repeat One or repeat all or not repeat.
Music: Press "Left/Right" key on the remote control to select this function, press "OK"
key to play background music.(Musics and photos need to place in the identical folder,
or you may select some music in music file first.)
Playlist: Press "Left/Right" key on the remote control to select this function, press "OK"
key to show playlist.
Info. : Press "Left/Right" key on the remote control to select this function, press "OK"
key to show the information of photo. Including resolution, size and so on.
13
Clockwise: Press "Left/Right" key on the remote control to select this function, press
"OK" key to clockwise rotation photo.
Counter-clockwise: Press "Left/Right" key on the remote control to select this function,
press "OK" key to counter-clockwise rotation photo.
Zoom in: Press "Left/Right" key on the remote control to select this function, press "OK"
key to enlarge picture.
Zoom out: Press "Left/Right" key on the remote control to select this function, press
"OK" key to reduce picture.
MUSIC
The operations are similar to the "PHOTO".Please refer to "PHOTO" options.
Basic Function
FB: Press "Left/Right" key on the remote control to select this function, press "OK" key
to fast back. Press "PLAY"key to play normally.
FF: Press "Left/Right" key on the remote control to select this function, press "OK" key
to fast forward. Press "PLAY"key to play normally.
Select time: Press "Left/Right" key on the remote control to select this function, press
"OK" key to select the time to play .
Other functions are similar to the "PHOTO", Please refer to "PHOTO" options.
MOVIE
The operations are similar to the "PHOTO".Please refer to "PHOTO" options.
Basic Function
Set A: Press "Left/Right" key on the remote control to select this function, press "OK"
key to set A and B, the film will circulating play in the time of A to B.
SF: Press "Left/Right" key on the remote control to select this function, press "OK" key
to slow down play speed. Press "PLAY"key to play normally.
Step: Press "Left/Right" key on the remote control to select this function, press "OK" key
to play one step by step. Press "PLAY"key to play normally.
Proportion: Press "Left/Right" key on the remote control to select this function, press
"OK" key to select proportion among Auto/4:3/Full.(This function does not support
more than 1920×1080 HDvideo.)
Note: Zoom Function does not support more than 1920X1080 HD video.
TEXT
The most operations and functions are the similar to "PHOTO". Please refer to "PHOTO" options.
14
TV image is better, but has TV system setting is incorrect. Enter to "TV" menu, reset sound system again .
noise.
Power plug is loose, power 1.Check power cord whether or not connect well.
No image. No sound.
cord don't connect well. 2.Check if " " on the panel is on.
Signal is exposed to disturb,
TV image have stripe. Don't use electric blower around machine, adjust
such as car, neon light, electric
antenna cable direction to reduce disturb.
blower etc.
1.TV signal is reflected by valley 1.Use high directional antenna cable. Use Fine
TV image have shadow. or building. Tune of "TV".
2.Toward direction of antenna 2.Adjust toward direction of antenna cable.
cable is incorrect.
1.Color saturation is too low. 1.Enter "PICTURE" to add up color saturation.
No color.
2.Color system is incorrect . 2.Enter "TV" to change color system.
1.Adjust volume to proper value.
1.Volume setting is too low.
2.Press "MUTE" button on remote control to
TV no sound. 2.Sound is muted.
eliminate mute.
3.Sound system is incorrect.
3.Enter "TV" to change sound system.
Computer no display,and
Check signal cable whether or not loose, fall off,
prompt no signal input,red Signal cable is loose or fall off.
reconnect well again.
indicator LED twinkling.
1.Receive window of remote
continue was covered by 1.Remove objects, avoiding cover the receive
Remote control distance is
objects. window of remote control.
short, lose control.
2.The battery energy of remote 2.Change battery.
control is to low.
1.Adjustment is incorrect. 1.Use auto-adjustment function.
Computer display faintly.
2.Display mode is incorrect. 2.Use commend mode.
1.Use auto-adjustment function.
Computer display image
1.Adjustment is incorrect. 2.Enter "GEOMETRY" to adjust horizontal or
excursion, not full screen,
2.Display mode is incorrect. vertical position.
over screen.
3.Use recommended mode.
Noise Signals at turning off. Electrical release at turning off. It is normal.
Exterior influence, for example
lightning, static electricity and so Press " " button to turn off electrical source,
Can not operate this then press " " button to turn on the TV again
on, which are possibly to disturb
machine.
the normal operation of this after 1-2 minutes.
machine.
CAUTION: Don't let your machine display the same picture for a long time, please set up a screen protection
procedure. If a high contrast picture remains for along time, this picture will bring a 'leave shadow' in screen.
Usually the 'leave shadow' will disappear gradually when you turn off the machine power. However, this
trouble can't be repaired, Which isn't in range of warranty.
15