Beruflich Dokumente
Kultur Dokumente
- Pressroste
- Schweißpressroste
- Blechprofilroste
- GFK - Roste
- Spindeltreppen
FRM 3
+3233202499
WARTEN BTR 1608/08335 - E/ASKROMEIN
@@BNZ Vk Exp.@@ @@SDN Lichtgitter GmbH@@
Seite 1 von 5
Angebot-Nr. 1608/08335 - E
[Bei Rückfragen bitte unbedingt angeben]
Anfrage vom Ihr Zeichen Unser Zeichen Tel: +49 2563 911-214
16-0490 31.08.16 Adi Amat Herr Lensing /sts/tk Fax: +49 2563 911-118
NEMO-Brugge E-mail: Ansgar.Lensing@lichtgitter.com
vielen Dank für Ihre Anfrage. Nachstehend bieten wir Ihnen unter Zugrundelegung unserer Lieferungs- und
Zahlungsbedingungen [falls nicht bekannt, bitte anfordern] freibleibend an:
Raddruck: 30 kN
Lastwürfel: 200 x 260 mm
Stützweite i. L.: 1940 mm
Tolerances mounting:
The clearance between the profiles is allowed 3 - 4 mm. Therefore it can
catch a diffrence of 9 - 12mm per running meter in the width of the grids. If
that is not enough, the operating company must mount a angle bracket in the
boundary area to prevent aeration.
General note:
The grids are allowed to have a max. area of 110m². Are the grids larger
than 110m² then you will have to make more sections on the building
sites!
note:
The hatches are normaly 180 degrees to open if wanted we can produce the
hatch with 110 degrees opening. This will be an extra charge of 60.- Euro
every hatch.
ALTERNATIVPOSITION
Lichtgitter-Blechprofilroste, Typ BN-OF
note:
The hatches are normaly 180 degrees to open if wanted we can produce the
hatch with 110 degrees opening. This will be an extra charge of 60.- Euro
every hatch.
The Price above refers to the Plank-length, the indicated module "R"
62,5 mm should be kept during determination of length.
If the length does not stay in the module "R" we will have to cut the plank in
the next module. The extra cut will cost 1,00 EUR.
Preisbindung: Aufgrund der aktuellen Entwicklung auf dem Stahl- und Zinksektor bitten wir um
Verständnis dafür, dass wir uns an die angegebenen Preise vorerst nur 2 Wochen
binden können.