Beruflich Dokumente
Kultur Dokumente
KG
Eisenbahnstrasse 67 73265 Dettingen/Teck
Tel.: +49 7021 57 02-0
Fax: +49 7021 57 02-14
www.dietz-motoren.de vertrieb@dietz-motoren.de
Dietz-motoren Dietz-motoren
Drehstrommotoren Three-phase motors
(F)DR; (F)DP; F(DW); PE; DE (F)DR; (F)DP; F(DW); PE; DE
Vor Inbetriebnahme sind die Betriebsanleitung und Before commissioning, read the Operating Instructions
die Sicherheitshinweise zu lesen und zu beachten and the Safety Instructions, and comply with their
contents
1. Anwendung 1. Use
Diese Betriebsanleitung enthält grundlegende und spezielle Hinweise These Operating Instructions contain basic and special usage
für den Einsatz, auch in explosionsgefährdeten Bereichen, die bei der information, which also cover use in areas at risk of explosion. Their
Aufstellung, Betrieb, Überwachung und Wartung zu beachten sind. contents must be complied with during installation, operation, monitoring
Lesen Sie diese Sicherheits- und Warnhinweise sorgfältig durch, bevor and maintenance. Read these safety and warning notices carefully
Sie mit der Installation bzw. der Inbetriebnahme der Dietz-motoren before you start installing or commissioning the Dietz-motoren three-
Drehstrommotoren beginnen. Diese Anleitung ist greifbar aufzubewahren. phase motors. These instructions must be kept handy for use. Everyone
Es muss gewährleistet sein, dass alle Personen, die Tätigkeiten an den working on the motors must be able to read these instructions at any
Motoren auszuführen haben, diese Anleitung jederzeit einsehen können. time. In addition to these Operating Instructions, an instruction manual
Ergänzend zu dieser Anleitung sind auch Betriebsanweisungen im Sinne must be provided in compliance with health and safety legislation and the
des Arbeitsschutzgesetzes und der Arbeitsmittel-Benutzungsverordnung locally applicable ordinance on the use of working equipment.
bereitzustellen.
Der Drehstrommotor, die Betriebsanleitung selbst und die Typenschild- The three-phase motor, the Operating Instructions themselves and the
Angaben beziehen sich auf den durch unsere Auftragsbestätigung details on the type plate refer to Dietz-motoren‘s scope of supply, as
festgelegten Dietz-motoren Lieferumfang. specified in our order confirmation.
In den nachfolgenden Texten werden unter anderem die folgenden The safety symbols used in the texts below include the following:
Sicherheitssymbole verwendet:
Dieses Symbol weist darauf hin, dass vor allem Gefahren für Leben und This symbol indicates the presence of hazards to life and limb. Damage to
Gesundheit von Personen bestehen. Darüber hinaus sind auch Gefahren the machine or the environment, or physical damage, are also possible.
für Maschine, Sachen oder Umwelt möglich.
Dieses Symbol weist darauf hin, dass besondere Gefahren durch This symbol indicates the presence of particular life-endangering ha-
elektrische Spannungen für das Leben und die Gesundheit von Personen zards and health hazards caused by electric voltage. Failure to comply
bestehen. Werden diese Hinweise nicht beachtet, so kann das schwere with this might result in severe and even fatal injury.
und auch tödliche Verletzungen zur Folge haben.
Dieses Symbol weist darauf hin, dass heiße Flächen, oder rotierende This symbol indicates that hot surfaces or rotating parts must not be
Teile nicht berührt werden dürfen. Dies kann schwere und auch tödliche touched. This might result in severe and even fatal injury.
Verletzungen zur Folge haben.
Hinweis auf Sicherheitsmaßnahmen zum Explosionsschutz. Note relating to safety measures for protecting against explosion.
Achtung! Warning!
Beachten Sie bitte auch, dass ein Sicherheitssymbol niemals den Text Also note that the text in a safety notice always takes precedence over
eines Sicherheitshinweises ersetzen kann! a safety symbol!
Bestimmte Konturen können bedingt durch ihre Funktion scharfkantig Due to their function, some contours can have sharp edges. Generally,
sein. Generell ist bei Handhabung des Motors geeignete persönliche suitable personal protective equipment (PPE) must be specified for the
Schutzausrüstung festzulegen und zu tragen. motor, and worn by people who work on it.
Die Motoren müssen vor Inbetriebnahme zuverlässig gegen Motors must be reliably secured against initial torques, overturning,
Anlaufmomente, Umkippen, Herunterfallen oder Abstürzen gesichert falling down or falling from a height before commissioning. You must not
werden. Ein Anlauf mit ungesicherter offener Passfeder ist unzulässig. start up the motor if the keyway is uncovered and not secured. When
Beim Anlaufen und im Betrieb des Motors dürfen keine Gefahren you start up the motor, and when it is in operation, take measures to
durch Wegschleudern von Bauteilen entstehen. Insbesondere schwere ensure that no motor components can be propelled out of it. Heavy
Motoren beinhalten unter anderem bei der Aufstellung Quetsch- oder motors, in particular, are a source of risks of crushing or shearing when
Schergefahren die zuverlässig beseitigt werden müssen. Im Falle they are installed, and otherwise. These risks must be reliably preven-
von Kurzschlüssen im Störfall auftretende Gas- oder dampfförmige ted. A faulty motor can generate short-circuits which produce degrada-
Zersetzungsprodukte können giftig sein und sollten nicht eingeatmet tion products such as gases or vapours, which can be poisonous and
werden. must not be breathed in.
Nach dem Abschalten trudelt der Motor aus. Rotierende Elemente After the motor is switched off, it runs down. There is a risk of injury
beinhalten Verletzungsgefahr. Wartung, Reinigung, Instandhaltung, from rotating elements. Maintenance, cleaning, preventive maintenan-
Fehlersuche o.ä. dürfen nur an stillstehenden zuverlässig an ce, error-tracking or similar tasks must only be performed on motors
wiederanlaufgesicherten und von der Spannungsversorgung getrennten that are not in motion, have been reliably secured against starting up,
Motoren durchgeführt werden. Die Zeit bis zum vollständigen Abbau and have been disconnected from the power supply. It is essential to
elektrischer Potenziale muss abgewartet werden. wait until all electrical potential has been discharged before commen-
cing work on the motor.
3. Aufstellung 3. Installation
Motor nur in der gekennzeichneten Bauform montieren und betreiben. Only install and run the motor in the indicated form. Conventional mo-
Fußmotoren müssen auf einer ebenen, stabilen Fläche aufgestellt tors must be installed on a solid, level surface.
werden. Remove anti-corrosion agents from shaft end and flange surface.
Rostschutzmittel von Wellenende und Flanschfläche entfernen. Comply with minimum spacing between the air intake opening and wall,
Mindestabstand der Luftansaugöffnung von der Wand entsprechend der which depends on motor size and is stated in the table.
Motorbaugröße und Tabelle einhalten.
Baugröße 71 - 100 112 132-160 Baugrö
Baugröße 71 - 100 112 132-200 Size 71 - 100 112 132-200
X1 25 40 45 X1
25 40
25 45
40 45
x1 x1
Wuchtzustand entsprechend Banderole am Wellenende beachten Check the balance status shown on the sleeve on the end of the shaft
und das Gegenstück entsprechend vorbereiten. Aufziehen von and prepare the counterpiece to suit. Pull on coupling halves or pulleys.
Kupplungshälften oder Riemenscheiben nicht mit Hammerschlägen, Do not hammer them into place, as this will damage the bearings!
da sonst die Lager beschädigt werden! In allen Motorwellenenden sind There are threads on all the motor shaft ends which must be used when
Gewinde angebracht, die zum Aufziehen verwendet werden müssen pulling them on.
Bei Riemenantrieb müssen Motor und Maschine If using a belt drive, the motor and machine
achsparallel aufgestellt werden. must be set up axially parallel.
Die Riemenscheiben müssen fluchten. The pulleys must be flush.
Bei Kupplungsantrieb ist auf den Minimalabstand der Kupplungs- If using a coupling drive, ensure that the minimum spacing of the
hälften (a) zu achten sowie auf kleinsten Achsversatz (b) und den couplig halves (a), minimum axial offset (b) and angle offset (c) are set
Winkelversatz (c) correctly.
4. Anschluss
4. Connection
Beim Anschließen müssen die Anziehdrehmomente für die When connecting the motor, comply with the tightening torques for
Klemmbrettmuttern nach folgender Tabelle eingehalten werden: junction plate nuts stated in the table below:
Für die Kabeleinführungen in den Klemmenkasten müssen Cable fittings with seals must be used for cable inlets in the terminal
Kabel-verschraubungen mit Dichtungen verwendet werden. box. For motors that are used in different locations, strain relief must be
Bei ortsveränderlichen Motoren ist eine Zugentlastung für die provided for the connection cable.
Anschlussleitung vorzusehen.
Wenn der Klemmenkasten aus Kunststoff ist, dürfen nur If the terminal box is plastic, only plastic cable fittings can be used. Metal
Kabelverschraubungen aus Kunststoff verwendet werden. Einführungen inlets will not connect to the earth conductor system if plastic cable
aus Metall haben in diesem Fall keine Verbindung zum Schutzleitersystem. fittings are used.
5. Instandhaltung 5. Maintenance
Die Instandhaltung der Motoren darf nur von der Firma Dietz-motoren Only Dietz-motoren or an authorised specialist workshop are permitted to
oder einer autorisierten Fachwerkstatt entsprechend den nachfolgenden maintain the motors. They must follow the detailed instructions provided
detaillierten Anweisungen durchgeführt werden. below.
Vor dem Öffnen des Klemmenkastens und vor der Demontage des Disconnect the electricity supply from the mains before opening the ter-
Motors muss der elektrische Anschluss vom Netz getrennt werden. Am minal box and removing the motor. Only work on the motor if the main
Motor nur arbeiten, wenn der Hauptschalter gegen Wiedereinschalten switch is locked so that it cannot be switched back on!
gesichert ist!
Lüfterhaube (5) abnehmen: Die 4 Schrauben am Umfang der Lüfterhaube Take off the fan cover (5): Remove the 4 screws around the edge of the
entfernen. fan cover.
Sicherungsring vor dem Lüfterflügel (6) mit Zange entfernen, dann kann Use pliers to remove the circlip in front of the fan blade (6). You can
der Lüfterflügel mit einer Spezialvorrichtung abgezogen werden. Die then pull out the fan blade with a special device, which can be bought
Abziehvorrichtung ist bei Dietz-motoren gegen Berechnung erhältlich. from Dietz-motoren.
Die Schrauben des Lagerabschlussdeckels (9) auf der Antriebs- oder If present, remove the screws on the bearing end plate (9) on the dri-
Gegenantriebsseite entfernen, wenn vorhanden. ving or non-driving end.
Die Lagerschild-Befestigungsschrauben auf Antriebs- u. Gegen- Remove the end shield retaining bolts on the driving and non-driving
antriebsseite entfernen. end.
Lagerschilder (3) und (4) abnehmen und Rotor (2) aus dem Stator Take off the end shields (3) and (4) and pull the rotor (2) out of the
(1) herausziehen. stator (1).
Sie können die Originalersatzteile unter
Angabe der Motornummer und der Positionsnummer
bei Dietz-motoren bestellen, beziehungsweise unter
Angabe der Leistungsschildnummern.
Die eingebauten Wälzlager sind lebensdauergeschmiert und erreichen The ball bearings fitted are lubricated for life and achieve the operating
unter normalen Betriebsverhältnissen (Kupplungsbetrieb, kein Wasser, hours listed below under normal operating conditions (coupling operation,
kein Schmutz) folgende Betriebsstunden: no water, no dirt):
3000 1500 1000 750 U/ Bearing Bearing 3000 1500 1000 750
Baugröße Lager A Lager B Size
U/min U/min U/min min A B rpm rpm rpm rpm
71 6203-2Z 6203-2Z 15000 20000 20000 20000 71 6203-2Z 6203-2Z 15000 20000 20000 20000
80 6204-2Z 6204-2Z 15000 20000 20000 20000 80 6204-2Z 6204-2Z 15000 20000 20000 20000
90 6205-2Z 6205-2Z 12000 20000 20000 20000 90 6205-2Z 6205-2Z 12000 20000 20000 20000
100 6206-2Z 6206-2Z 10000 20000 20000 20000 100 6206-2Z 6206-2Z 10000 20000 20000 20000
112 6306-2Z 6306-2Z 10000 20000 20000 20000 112 6306-2Z 6306-2Z 10000 20000 20000 20000
132 6308-2Z 6308-2Z 10000 20000 20000 20000 132 6308-2Z 6308-2Z 10000 20000 20000 20000
160 6310-2Z 6310-2Z 10000 20000 20000 20000 160 6310-2Z 6310-2Z 10000 20000 20000 20000
200 6312-2Z 6312-2Z 10000 20000 20000 20000 200 6312-2Z 6312-2Z 10000 20000 20000 20000
Die Tabelle gilt für Standardlager der entsprechenden Baugröße. The table applies to standard bearings of the corresponding size.
Bei abweichender Lagerzuordnung bitte Rücksprache mit dem Hersteller. For other bearing arrangements, please contact the manufacturer.
Die Lager sollten bei Betriebsart S1 spätestens alle 2
Jahre überprüft und wenn notwendig getauscht
werden. Motor zerlegen.
Muss in umgekehrter Reihenfolge wie beim Zerlegen vorgenommen To assemble the motor, following the instructions for dismantling but in
werden. Es ist auf korrekte Anzugsmomente zu achten. reverse order. Ensure the correct tightening torques are used.
6. Schutzart bei Bauform IM B14 und IM B34 6. Protection class for models IM B14 and IM B34
Bei Bauform IM B14 bzw. IM B34 wird die Schutzart erst durch In the case of models IM B14 or IM B34, the protection class is only
Anflanschen des Motors an die Arbeitsmaschine erreicht. achieved when the motor is flange-mounted on the machine.
Die angegebene maximale Einschraubtiefe ist unbedingt zu beachten, The maximum stated screw-in depth MUST be complied with, otherwise
da sonst die Motorwicklung beschädigt werden kann! the motor winding might be damaged!
Die angegebene Motorschutzart wird erst nach Installation erreicht, wenn The stated motor protection class is only achieved after installation if
dabei sämtliche mögliche Anschlussöffnungen o.Ä. mit Kabel, geeigneten all possible connection openings etc. have been sealed with cables,
Kabelverschraubungen, Verschlußstopfen abgedichtet worden sind. appropriate cable fittings, sealing plugs.
Eventuell vorhandene Kondenswasserbohrungen müssen verschlossen Any condensate holes present must be sealed to achieve the stated
werden, um die angegebene Schutzart zu erreichen. protection class.
• Aufstellhöhe max. 1000 m über NN • Maximum installation height 1000 m above mean sea level
• Kühlmitteltemperatur + 5°C bis + 40°C • Coolant temperature + 5°C to + 40°C
• Frequenztoleranz ± 2% nach DIN EN 60034-1 • Frequency tolerance ± 2% in accordance with DIN EN 60034-1
• Spannungstoleranz ± 5% nach DIN EN 60034-1 • Voltage tolerance ± 5% in accordance with DIN EN 60034-1
max. Konstantklimata 23/83 und 40/92 ist zulässig; entspricht erhöhter Maximum constant climates 23/83 and 40/92 are permitted, with corre-
Luftfeuchtigkeit und normalem Tropenklima spondingly increased air humidity and normal tropical climate.
• Allgemeine Sicherheitshinweise beachten • Read and comply with the general safety notices
• Die gültigen nationalen bzw. internationalen Betriebs- und • Comply with the valid national or international operating and
Errichtungsvorschriften der Anlage bzw. der Maschine beachten installation guidelines for the system or machine
• Leistungsschilddaten mit dem speisenden Netz und der • Compare the data on the rating plate with the mains supply and the
angetriebenen Maschine vergleichen driven machine
• Netzspannung und -frequenz müssen mit der Bemessungsspannung • The mains voltage and frequency must match the motor‘s rated
und -frequenz des Motors übereinstimmen voltage and frequency
• Die Bemessungsleistung des Motors darf nicht überschritten werden • The motor‘s rated output must not be exceeded
• Schutzleiter anschließen an Klemme • Connect the earth conductor to the terminal
• Abschnitt „Anschluss“ beachten • Read and comply with the „Connection“ section
• Abschnitt „Motorschutz“ beachten • Read and comply with the „Motor protection“ section
• Bei spannungsumschaltbaren Motoren muss die Schaltung mit der • For dual-voltage motors, the correct voltage must be supplied to the
Spannung verglichen werden circuit.
• bei polumschaltbaren Motoren muss die Schaltung entsprechend • For pole-changing motors, the circuit must match the number of
der Polzahl vorgenommen werden poles.
• Querschnitt des Anschlusskabels der Bemessungsstromstärke des • Select a connection cable with a large enough cross-section to suit
Motors anpassen the motor‘s rated current.
• Bei Motoren mit aufgebautem Frequenzumrichter ist die • For motors that are fitted with a frequency converter, comply with
Betriebsanleitung des Frequenzumrichter-Herstellers zu beachten. the contents of the Operating Instructions issued by the frequency
• Motor entsprechend dem im Klemmenkasten beigelegten Schaltbild converter manufacturer.
anschließen • Connect the motor as shown in circuit diagram provided with terminal
• Netzzuleitung sorgfältig mit dem im Abschnitt „Anschluss“ box
angegebenen Drehmoment festziehen • Carefully tighten the terminals holding the mains supply cable with
• der Klemmenkasteninnenraum muss trocken-, schmutz- und the torque setting listed in the „Connection“ section.
staubfrei sein • The interior of the terminal box must be dry and free of dirt and dust.
• nicht verwendete Einführungsöffnungen müssen entsprechend der • Unused inlet openings must be sealed as specified for protection
Schutzart verschlossen werden class.
Angaben auf dem Leistungsschild (Beispiel): Details on the rating plate (example):
• 3 BIMET. 150°C • 3 BIMET. 150°C
• 3 KALTL. 150°C • 3 KALTL. 150°C
Erläuterung: Explanation:
• 3 Bimetall-Temperaturfühler • 3 bimetal temperature sensors
Technische Daten: Nennleistung bei U = 250 V und Technical data: Rated voltage AC = 250 V (VDE) 277 V (UL)
f = 50-60 Hz I = 2,5 A (cosφ = 1), l = 1,6 A (cosφ = 0,6) Rated current AC cosφ = 1.0/cycles --> 2.5A/10,000; Rated current
• 3 PTC-Temperaturfühler (Kaltleiter) AC cosφ = 0.6/cycles --> 1.6A/10,000; Max. switching current AC
Technische Daten : Nach DIN 44081 und DIN 44082. cosφ = 1.0/cycles --> 6.3A/3,000 and 7.5A/300
Hinweis! • 3 PTC temperature sensors (PTC thermistors)
Es ist ein zusätzliches Auslösegerät erforderlich. Technical data: In accordance with DIN 44081 and DIN 44082.
Note!
An extra motor protection switch is required.
Anmerkung! Comment!
Bei Einphasen-Wechselstrommotoren oder Sondermotoren A different version is possible for single-phase AC motors or special
ist eine abweichende Ausführung möglich. motors.
Zusätzliche Anforderungen für die Zündschutzart Ex nA IIB Additional regulations for ignition protection class Ex nA IIB
(non sparking) für Gas und Ex tc IIIB (Schutz durch Gehäuse) für (non-sparking) for gases and Ex tc IIIB (protection by housing) for
nicht leitenden Staub. non-conductive dust.
Für das Errichten elektrischer Anlagen im explosionsgeschützten Bereich It is essential that the international and national requirements and stan-
sind die internationalen bzw. nationalen Anforderungen und Normen dards are complied with when electrical systems are installed in areas
unbedingt zu beachten. with explosion protection.
• Die Umgebungstemperatur liegt innerhalb der erlaubten Grenzwerte • An ambient temperature within the permitted limit values of -20°C
-20°C bis + 40°C to 40°C
• Die Umgebung ist frei von das Material angreifenden Bestandteilen • Surroundings that are free of elements that might attack the
wie z.B. Säuren, Laugen, Lösungsmitteln, Flugrost, Eisenoxide, equipment, such as acids, lyes, solvents, initial easily removable
aggressiven oder abrasiven Gasen oder Flüssigkeiten. rust, iron oxides, or aggressive or abrasive gases or liquids.
• Der Motor muss mittels Motorschutzschalter auf den • The motor must be restricted to the rated current and monitored
Bemessungsstrom begrenzt und überwacht werden. using a motor protection switch.
• Werte gemäß Motorleistungsschild. • Values according to motor rating plate.
• Anzahl der Einschaltungen maximal 3 pro Stunde. Diese müssen • Can be switched on max. 3x per hour. These actions must be evenly
gleichmäßig verteilt sein. distributed.
Die bestimmungsgemäße Verwendung schließt aus: Die bestimmungsgemäße Verwendung schließt aus:
• Besondere Umgebungsbedingungen, wie z.B. Umgebungstemperatur • Special ambient conditions such as an ambient temperature that
am Montage-/Einsatzort von mehr als +40°C, Staubablagerungen, exceeds +40°C at the assembly location/place of use, dust deposits,
Erschütterungen am Montage-/Einsatzort des Motors. vibrations at the motor‘s place of assembly/use.
• Betrieb mit Stäuben, Gasen, Dämpfen oder Nebeln, die zur • Operation with dusts, gasses, vapours or mists that have a tendency
Selbstentzündung neigen. to self-ignite.
• Der Motor selbst darf nicht in einer zündfähigen bzw. staubhaltigen, • The motor itself must not be installed and operated in a dusty,
brennbaren Staubatmosphäre aufgestellt und betrieben werden! flammable atmosphere or one which might ignite!
• Bei Motoren mit Zündschutzart „nA“ (non sparking) oder bei Motoren • For motors with ignition protection class „nA“ (non-sparking) or
mit Zündschutzart „tc“ (Schutz durch Gehäuse) ist ein Betrieb am ignition protection class „tc“ (protection by housing), operation on the
Frequenzumrichter grundsätzlich nicht zulässig! frequency converter is not permitted!
• Die Motoren der Kategorie 3D (Zone 22) dürfen nur bei nicht- • Motors in category 3D (zone 22) must only be used when non-
leitenden Stäuben verwendet werden. conductive dusts are present.
• Vertikale Einbaulage der Motorachse ist nur zulässig, wenn über der
Lüfterhaube ein Schutzdach angebracht ist. Es ist zu beachten, dass • The motor axis can only be installed vertically if there is a protective
bei Einbau mit vertikaler Motorachse die Lagerlebensdauer reduziert roof over the fan cover. Note that, if the motor axis is installed
ist und der Zustand der Lager in kürzeren Intervallen überprüft vertically, the bearing life will be reduced and the condition of the
werden muss. bearings must be checked more frequently.
• Reversierung und Gegenstrombremsung ist nicht zulässig. • Running the motor in reverse and reverse current braking are not
permitted.
Besondere Verwendungen können das Gefährdungspotential erhöhen Some forms of use might increase the potential risks and must be
und müssen der Fa. Dietz-motoren vorher mitgeteilt und mit Ihr reported to and agreed with Dietz-motoren in advance.
abgestimmt werden.
Auf der Oberfläche des Motors sind keine Staubschichten zulässig! Layers of dust on the surface of the motor are not permitted!
Es sind keine Stäube von Explosivstoffen, welche keinen Dust particles produced from explosive substances, which do not
atmosphärischen Sauerstoff zur Verbrennung benötigen und auch require atmospheric oxygen to ignite, and other spontaneously
keine pyrophoren Stoffe zulässig. combusting substances, are not permitted.
Die explosionsgeschützten ATEX-Motoren sind wie folgt gekennzeichnet The ATEX motors with explosion protection are labelled as follows
(Beispiel): (example):
II 3D Ex tc IIIB T125°C Dc IP54 (nichtleitende Stäube) II 3D Ex tc IIIB T125°C Dc IP54 (Non-conductive dust)
Den Motor nicht ungeschützt im Freien lagern. Vor Feuchtigkeit schützen. Do not store the motor outdoors without suitable protection. Protect from
moisture.
Hebewerkzeug sicher ansetzen. Nur Hebezeuge und Attach lifting tackle securely. Only use lifting tackle and load-handling
Lastenaufnahmeeinrichtungen mit ausreichender Tragfähigkeit equipment that have sufficient load-bearing capacity.
verwenden.
Flüssigkeitsgekühlte Motoren dürfen nur an den Ringösen angehoben Liquid-cooled motors must only be lifted at the eye loops: the cooling unit
werden – mechanische Belastung der Kühleinheit ist nicht zulässig. must not be loaded mechanically.
Bei Motoren oder Aggregaten, welche mit Schock-
Sensoren ausgestattet sind, ist dessen Zustand vor
Aufstellung zu prüfen. Bei ausgelöstem Schock-
Sensor muss der Motor zur Überprüfung zurück zum
Hersteller.
If motors or units are fitted with
shock sensors, check their status
before installation. If the shock sensor has been
triggered, send the motor back to the manufacturer
for checking.
Die Befestigung darf nur entweder am Flansch oder am Fuss erfolgen, da The motor must only be attached at either the flange or foot, otherwi-
sonst Überbestimmung vorliegt. Besonders zu beachten bei Ausführung se the installation is statically overdetermined. For IM B34 or IM B35
mit Bauform IM B34 und IM B35. models, it is important to ensure the following:
Auf geeignetem Motorschutzschalter achten durch Betreiber. ATEX- The operator must install a suitable motor protection switch. Comply
Bedingungen beachten. with ATEX conditions.
Der Motor darf keinen unzulässig hohen Schwing- oder Stoßbelastungen The motor must not be subjected to vibration or shock loads that ex-
ausgesetzt sein. ceed the permitted limits.
• Der Motor ist vor der ersten, und vor jeder neuen Inbetriebnahme • Carefully check that the motor is in proper condition before
sorgfältig auf ordnungsgemäßen Zustand zu prüfen. commissioning it or running it again, later.
• Motoren, welche zum Beispiel bei der Anlieferung oder der Installation • For example, motors which were damaged during delivery or
Beschädigungen aufweisen, dürfen nicht betrieben werden. installation must not be used.
• Beim Anschluss von ATEX- Motoren dürfen nur isolierte • When you connect ATEX motors, only use insulated cable lugs.
Kabelschuhe verwendet werden. • Ensure that the motor is adequately protected against the ingress
• Es ist dafür zu sorgen, dass ein zuverlässiger Schutz gegen of foreign objects, rust, initial easily removable rust and other iron
Eindringen von Fremdkörpern, Rost, Flugrost und sonstigen oxides.
Eisenoxiden vorhanden ist. • Only regularly trained specialists are permitted to install, fit, operate
• Nur regelmäßig geschultes Fachpersonal darf die Motoren, and maintain the motors.
montieren, betreiben und warten. • Operation following incorrect assembly or maintenance will result in
• Betrieb nach fehlerhafter Montage oder Wartung führt zu nicht use that is not as intended.
bestimmungsgemäßem Gebrauch. • Carry out the electric installation in accordance with DIN EN 60204.
• Die elektrische Installation wird gemäß DIN EN 60204 ausgeführt. Ensure complete potential equalization, i.e. sufficient, proper,
Für einen vollständigen Potentialausgleich ist zu sorgen: d.h. professional earthing of all electrically conductive parts. An earth
ausreichende, Sach- und fachgerechte Erdung aller elektrisch conductor must be connected to the earth conductor terminal
leitenden Teile. An der am Motorgehäuse außen angebrachten attached to the outside of the motor housing.
Schutzleiterklemme ist ein Schutzleiter anzuschließen. • Ensure that there is easy access to the motor for regular maintenance
• Sicherstellung der Zugänglichkeit für eine regelmäßig work.
durchzuführende Wartung des Motors. • If phase conductors < 16 mm², the earth conductor must have at
• Bei Phasenleiter < 16 mm² muss der Schutzleiter mindestens least the same cross-section as the phase conductor. It must also
denselben Querschnitt wie der Phasenleiter haben, jedoch be at least 4 mm².
mindestens 4 mm². • The stated protection class will only be achieved if all openings (e.g.
• Die angegebene Schutzart wird nur erreicht, wenn sämtliche screw-in thread for cable fittings, condensate holes, etc.) are sealed
Öffnungen (z.B. Einschraubgewinde für Kabelverschraubungen, by the customer.
Kondenswasserbohrungen, ...) kundenseitig verschlossen werden. • Unused openings must be sealed.
• Nicht genutzte Öffnungen müssen verschlossen werden. • The operator must note and comply with the values specified in DIN
• Der Betreiber muss bezüglich der Kabel- und Leitungseinführung, EN 60079-0 for cable and line inlets and strain relief.
sowie der Zugentlastung für das Kabel die DIN EN 60079-0
beachten, beziehungsweise einhalten.
Die Lüfterhaube, besonders das Ansauggitter, und die Luftkanäle am Dust and fluff must be regularly cleaned off the fan cover, especially the
Motorgehäuse müssen regelmäßig von Staub und Flusen gereinigt intake grille and air ducts on the motor housing. The cleaning intervals
werden. Die Zeitabstände der Reinigung richten sich nach dem will vary according to how much dust is produced. Fluff must be regular-
Staubanfall. Besonders in Textilbetrieben ist die Entfernung des ly removed in textile factories, in particular.
Faserfluges regelmäßig erforderlich. For safety reasons, only specially trained service specialists employed
Aus Sicherheitsgründen darf ausschließlich speziell geschultes Service- by Dietz-motoren or companies authorised by Dietz-motoren are permit-
Fachpersonal der Fa. Dietz-motoren oder von Dietz-motoren autorisierte ted to replace components at DIETZ and repair DIETZ motors for use
Unternehmen, Bauteile im Hause Dietz-motoren austauschen sowie in areas at risk of explosion. If anyone else performs this work, this will
Dietz-motoren für explosionsgefährdete Bereiche reparieren. Hiervon result in the loss of warranty, and Dietz-motoren will no longer accept
abweichende Vorgehensweisen führen zum Verlust der Gewährleistung any liability. To retain full functionality and the agreed warranty, only use
und der Haftungsübernahme durch die Fa. Dietz-motoren. Damit die genuine manufacturer‘s spare parts. Lists of spare parts for standard
Funktionssicherheit und die vereinbarte Gewährleistung erhalten bleiben, devices do not apply to ATEX devices and cannot be used.
dürfen ausschließlich Original-Ersatzteile des Herstellers verwendet
werden. Ersatzteillisten von Standard- Motoren sind bei ATEX- Geräten
ungültig und nicht anwendbar.
Für Schäden durch Verwendung von Fremdteilen übernimmt Dietz- Dietz-motoren will not accept any liability for damage resulting from the
motoren keine Haftung! use of third-party parts!
Achtung! Warning!
Es dürfen nur vom Hersteller freigegebene Wälzlager verwendet werden. Only use bearings that have been approved by the manufacturer.
Hinweis! Note!
Die Betriebsstunden-Angaben gelten bei Nenndrehzahl und The stated operating hours apply at nominal speed and when the motor
bestimmungsgemäßem Gebrauch; jedoch nicht z.B. bei hoher is used as intended, but not if there is frequent switching, for example.
Schalthäufigkeit. Abhängig von den Umgebungsbedingungen müssen Depending on the ambient conditions, bearings and radial shaft sealing
Lager und Radialwellendichtringe ggf. früher ausgetauscht werden. rings might have to be replaced sooner.
Der Potentialausgleich muss bei jeder Wartung überprüft und, falls You must always check whether potential equalisation is properly instal-
notwendig, in einwandfreien Zustand versetzt werden. led during maintenance, and correct it if necessary.
Die durchgeführten Arbeiten müssen unter Angabe des Ausführenden The work performed must be documented in full, in chronological order,
chronologisch und vollständig dokumentiert werden. Insbesondere and the name of the person who carried out the work must be recorded.
müssen die durchgeführten Maßnahmen, sowie die Einhaltung aller In particular, the measures performed and compliance with all applica-
geltenden Vorschriften und der Herstellerangaben ble requirements and the manufacturer‘s details must be documented.
dokumentiert werden. Die Dokumentation muss gesichert und für The documentation must be kept in a safe place where it can be acces-
schnellen Zugriff verwahrt werden. sed quickly.
Sämtliche Komponenten des Motors sind entsprechend den nationalen All the motor‘s components must be disposed of professionally in accor-
und internationalen Gesetzen und Vorschriften fachgerecht zu entsorgen. dance with national and international legislation and requirements.
• Es muss sauberes Kühlwasser, Wasserhärte 1,3 mmol Calcium- • Clean cooling water, hardness 1.3 mmol calcium carbonate per litre
carbonat pro Liter Wasser (max. 7,3°dH), verwendet werden. of water (max. water hardness 7.3°dGH), must be used.
Eine Verschmutzung durch mitgeführte Partikel im Kühlwasser muss • Suitable filter systems must be used to prevent soiling by particles
gegebenenfalls durch geeignete Filtersysteme verhindert carried in the cooling water, if necessary.
werden. • To avoid electro-chemical reactions, ensure that suitable materials
• Zur Vermeidung von elektrochemischen Reaktionen ist auf geeignete are paired with each other.
Materialpaarungen zu achten. • Unless otherwise specified, the coolant inlet temperature is min.
• Die Kühlwasser-Einlauftemperatur beträgt min. 10°C und max. 25°C, 10°C and max. 25°C.
wenn nicht anders spezifiziert. • If the motor is operated or stored at temperatures below zero, the
• Bei Betrieb oder Lagerung des Motors unterhalb der Frostgrenze coolant must be prevented from freezing, either by draining the
muss ein Gefrieren des Kühlwassers verhindert werden. Hierzu coolant while the motor is in storage or by using a frost protection
kann entweder bei Lagerung das Kühlwasser entleert werden, bzw. additive during operation.
für den Betrieb ist ein Frostschutzadditiv zu verwenden. • If the coolant temperature is lower than room temperature, the
• Um Kondenswasserbildung zu unterbinden, muss, wenn die coolant circuit must be stopped by switching off the motor, to prevent
Kühlmitteltemperatur kleiner als die Raumtemperatur ist, mit condensate from forming.
Abschalten des Motors auch der Kühlmittelkreislauf unterbrochen • Do not operate the motor without coolant.
werden. • Unless otherwise specified, the maximum water pressure is 3.5 bar.
• Der Betrieb des Motors ohne Kühlwasser ist nicht zulässig. • The water exits the motor at the top so that air cannot accumulate
• Der maximale Wasserdruck beträgt 3,5 bar, wenn nicht anders in the cooling system. It is only permitted to install the motor in other
spezifiziert. orientations if this has been specified, or following consultation with
• Der Wasserauslauf am Motor ist oben, so dass sich keine Luft im the factory.
Kühlsystem ansammeln kann. Eine andere Einbaulage ist nur • Unless otherwise stated, the coolant flow quantity is:
zulässig, wenn entsprechend spezifiziert, oder nach Rücksprache
mit dem Werk.
• Die Kühlwasser-Durchflußmenge beträgt, wenn nicht anders
angegeben: