Beruflich Dokumente
Kultur Dokumente
Bore, cylindrical 0 0 0 0 0 0 0 0 0 0 0 0 0
deviation ∆dmp -8 -10 -12 -15 -20 -25 -30 -35 -40 -45 -50 -75 -100
Variation Diameter
Vdp series 7 · 8 · 9 10 13 15 19 25 31 38 44 50 56 63
0·1 8 10 12 19 25 31 38 44 50 56 63
2·3·4 6 8 9 11 15 19 23 26 30 34 38
Variation Vdmp 6 8 9 11 15 19 23 26 30 34 38
Bore, taper 1:12 +18 +21 +25 +30 +35 +40 +46 +52 +57 +63 +70 +80 +90
deviation ∆dmp 0 0 0 0 0 0 0 0 0 0 0 0 0
Deviation ∆dmp-∆d1mp +18 +21 +25 +30 +35 +40 +46 +52 +57 +63 +70 +80 +90
∆dmp 0 0 0 0 0 0 0 0 0 0 0 0 0
Variation Vdp 10 13 15 19 25 31 38 44 50 56 56
Bore, taper 1:30 +15 +20 +25 +30 +35 +40 +45 +50 +75 +100
deviation ∆dmp 0 0 0 0 0 0 0 0 0 0
Deviation ∆d1mp +35 +40 +50 +55 +60 +65 +75 +85 +100 +100
∆dmp 0 0 0 0 0 0 0 0 0 0
Variation Vdp 19 25 31 38 44 50 56 63
Width deviation ∆Bs 0 0 0 0 0 0 0 0 0 0 0 0 0
-120 -120 -120 -150 -200 -250 -300 -350 -400 -450 -500 -750 -1000
Width variation VBs 20 20 20 25 25 30 30 35 40 50 60 70 80
Radial runout Kia 10 13 15 20 25 30 40 50 60 65 70 80 90
Die Breitentoleranz ∆Cs und VCs ist identisch mit ∆Bs und VBs für den zugehörigen Innenring.
1)
Die Abweichung des Außendurchmessers bei Schulterkugellagern beträgt einheitlich 0/+10 µm.
Die Breitentoleranz ∆Cs und VCs ist identisch mit ∆Bs und VBs für den zugehörigen Innenring.
The width tolerances ∆Cs and VCs are identical to ∆Bs and VBs for the associated inner ring.
1)
The outside diameter deviation of all magneto bearings is 0/+10 µm.
The width tolerances ∆Cs and VCs are identical to ∆Bs and VBs for the associated inner ring.
0 0 0 0 0 0 0 0 0 0 0 0
Deviation ∆dmp -5 -6 -8 -9 -10 -13 -15 -18 -23 -27 -33 -40
Variation Diameter
Vdp series 7 · 8 · 9 5 6 8 9 10 13 15 18 23
0·1·2·3·4 4 5 6 7 8 10 12 14 18
Variation Vdmp 3 3 4 5 5 7 8 9 12
Width deviation 0 0 0 0 0 0 0 0 0 0 0 0
∆Bs -80 -120 -120 -150 -200 -250 -300 -350 400 -450 -500 -750
Width variation VBs 5 5 5 6 7 8 10 13 15 17 20 30
Radial runout Kia 4 4 5 5 6 8 10 13 15 17 20 25
Side face runout of inner
ring with reference to bore Sd 7 8 8 8 9 10 11 13 15 17 20 30
Assembled bearing inner
ring face runout with
raceway (axial runout) Sia 7 8 8 8 9 10 13 15 20 23 25 30
The ratings Sia apply to deep groove ball bearings and spindle bearings.
*) These ratings ∆
ds and ∆Ds apply only to diameter series 0 · 1 · 2 · 3 · 4.
Die Breitentoleranz ∆Cs ist identisch mit ∆Bs für den zugehörigen Innenring.
Die Planlaufwerte Sea gelten für Rillenkugellager.
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Deviation ∆Dmp -6 -7 -9 -10 -11 -13 -15 -18 -20 -23 -28 -35 -40 -50 -65
Variation Diameter
VDp series 7 · 8 · 9 6 7 9 10 11 13 15 18 20 23 28 35
0·1·2·3·4 5 5 7 8 8 10 11 14 15 17 21 26
Variation VDmp 3 4 5 5 6 7 8 9 10 12 14 18
Width variation VCs 5 5 6 8 8 8 10 11 13 15 18 20 25 30 40
Radial runout Kea 6 7 8 10 11 13 15 18 20 23 25 30 35 50 65
Variation in inclination of
outside cylindrical surface
to outer ring side face SD 8 8 8 9 10 10 11 13 13 15 18 20 30 40 50
Assembled bearing outer
ring face runout with
raceway (axial runout) Sea 8 8 10 11 13 14 15 18 20 23 25 30 40 55 70
The width tolerance ∆Cs is identical to ∆Bs for the associated inner ring.
The ratings Sea apply to deep groove ball bearings.
The width tolerance ∆Cs is identical to ∆Bs for the associated inner ring.
These ratings Sea apply to deep groove ball bearings and spindle bearings.
Die Breitentoleranz ∆Cs ist identisch mit ∆Bs für den zugehörigen Innenring.
Die Planlaufwerte Sea gelten für Rillenkugellager und Spindellager.
The width tolerance ∆Cs is identical to ∆Bs for the associated inner ring.
The ratings Sea apply to deep groove ball bearings and spindle bearings.
The ratings Sia apply to deep groove ball bearings and spindle bearings.
Die Breitentoleranz ∆Cs ist identisch mit ∆Bs für den zugehörigen Innenring.
Die Planlaufwerte Sea gelten für Rillenkugellager und Spindellager.
Die Breitentoleranz ∆Cs ist identisch mit ∆Bs für den zugehörigen Innenring.
The width tolerance ∆Cs is identical to ∆Bs for the associated inner ring.
The ratings Sea apply to deep groove ball bearings and spindle bearings.
The width tolerance ∆Cs is identical to ∆Bs for the associated inner ring.
0 0 0 0 0 0 0 0 0 0 0
Abweichung ∆Dmp, ∆Ds -7 -9 -10 -11 -13 -15 -18 -20 -23 -28 -35
Schwankung VDp 4 5 5 6 7 8 9 10 12 14 18
Rundlauf Kea 5 5 6 7 8 10 11 13 15 17 20
Neigungsschwankung SD 8 8 9 10 10 11 13 13 15 18 20
Planlauf Sea 8 10 11 13 14 15 18 20 23 25 30
Die Breitentoleranzen ∆Cs und VCs sind identisch mit ∆Bs und VBs für den zugehörigen Innenring.
Cylindrical bore 0 0 0 0 0 0 0 0 0 0
deviation ∆dmp, ∆ds -6 -8 -9 -10 -13 -15 -18 -23 -27 -30
Variation Vdp 3 4 5 5 7 8 9 12 14 16
Tapered bore 10 12 15 20 25 30 35 40 45 50
deviation ∆ds 0 0 0 0 0 0 0 0 0 0
Variation Vdp 3 4 5 5 7 8 9 12 14 16
Deviation ∆1mp - ∆dmp 4 6 6 8 8 10 12 12 14 16
0 0 0 0 0 0 0 0 0 0
Width deviation 0 0 0 0 0 0 0 0 0 0
∆Bs -100 -120 -150 -200 -250 -300 -350 -400 -450 -500
Width variation VBs 5 5 6 7 8 10 13 15 17 20
Radial runout Kia 3 4 4 5 6 8 8 10 10 12
Side face runout of inner
ring with reference to bore SD 8 8 8 9 10 11 13 15 17 20
Assembled bearing inner
ring face runout with
raceway (axial runout) Sia 8 8 8 9 10 13 15 20 23 25