Beruflich Dokumente
Kultur Dokumente
Deen LP 662572 AS Interface IO Terminal Unit Operating Instruction PDF
Deen LP 662572 AS Interface IO Terminal Unit Operating Instruction PDF
E/A-Anschlusseinheit
Bedienungsanleitung
AS-Interface
I/O Terminal unit
Operating instructions
662572 DE/GB
07/02
Bestell-Nr.: 662572
Benennung: BED.ANL.ASI-AE
Bezeichnung: D:LP-ASI-EA-AE-DE/GB
Stand: 07/2002
Autoren: Roland Ackermann
Grafik: Doris Schwarzenberger
Layout: 10.07.2002 Beatrice Huber
English 1. Introduction________________________________________13
2. Design and function _________________________________14
3. Technical data ______________________________________15
4. Teachware _________________________________________17
5. Design ____________________________________________18
6. SysLink contact allocation table _______________________19
7. Notes on safety _____________________________________20
Allgemein
Betriebsspannung 24 V DC
(wird von externem Netzgerät geliefert)
Schutzart IP 20
SlimLine S45
Slave-Typ Standard-Slave
Gesamtstrom- ≤270 mA
aufnahme
Eingangsbeschaltung PNP
Eingänge
Spannungsbereich 20 – 30 V
Schaltpegel-High ≥10 V
Eingangsstrom ≤1,5/≥5 mA
Low/High
Ausgänge
Strombelastbarkeit 1
in A DC 12/DC 13
typisch (Gesamtstrom
aller Ausgänge 4 A)
Kurzschlussschutz eingebaut
Induktionsschutz eingebaut
Verpolschutz eingebaut
Watchdog eingebaut
E/A Konfiguration 7
Schutzart IP 20
1 Slave 2
2 Slave 3
3 24 V-Sicherheitssteckbuchse
4 SysLink-Schnittstelle
5 0 V-Sicherheitssteckbuchse
6 ASi-Anschlussbuchsen
Kontaktbelegung
1 1
2 2
3 3
4 4
Slave Adr. 3
1 5
2 6
3 7
4 8
1 13
2 14
3 15
4 16
Slave Adr. 3
1 17
2 18
3 19
4 20
Versorgung 24 V DC 9,10,21,22
0 V DC 11,12,23,24
The AS-interface I/O terminal unit Order No. 527427 permits the
connection of digital sensors and actuators with 24 V DC signals to an
AS-interface network. The unit contains 2 AS-interface modules with
4 digital inputs and outputs each. Each of these two modules is used as
an AS-interface slave and has its own address.
The unit in ER format is suitable for use on the cabinet frames of the
Festo Didactic Learnline system, on the blue plug-in boards or slotted
assembly boards or as a table unit and consists of the following:
• 2 x AS-Interface slimline module S45, digital
Cables with ASi connection sockets are available in different lengths for
the connection of the unit with the the ASi master, ASi power supply or
other ASi units:
General
Operating voltage 24 V DC
(supplied via external power supply unit)
Protection classification IP 20
SlimLine S45
consumption
Inputs
Voltage range 20 – 30 V
Outputs
Current carrying 1
capacity
in A DC 12/DC 13
typical (total current of
all outputs 4 A)
Watchdog Built-in
I/O configuration 7
Protection IP 20
classification
1 Slave 2
2 Slave 3
3 24 V safety socket
4 SysLink interface
5 0 V safety socket
6 ASi connection sockets
Contact allocation
1 1
2 2
3 3
4 4
Slave addr. 3
1 5
2 6
3 7
4 8
1 13
2 14
3 15
4 16
Slave addr. 3
1 17
2 18
3 19
4 20
Supply 24 V DC 9,10,21,22
0 V DC 11,12,23,24
The ASi I/O terminal unit is designed to the latest state of the art
technology and is in compliance with recognised safety regulations.
However, if used incorrectly, there is a danger of injury or fatality to the
user or third parties and of damage to the unit. The device should
therefore only be used
• for its intended use in teaching and training establishments
• in absolutely safe condition
Malfunctions which may impair safety should not occur during training
and if so should be rectified immediately.