Beruflich Dokumente
Kultur Dokumente
KE7200
Aktiver Netzwerktester
Active Ethernet LAN Testing
KE7100
Netzwerktester
Ethernet LAN Testing
MAC-Adresse
und Fehlersuche in Netzwerken
The perfect toolbox for
Ping-Test
network troubleshooting
Link-Blink-Test
Verdrahtung TDR
IP-Tests
PoE+-Test
Ethernet Performance
Produktmatrix Netzwerktester / Comparision sheet LAN & Ethernet Tester
TDR Messung der Aderlänge und Entfernung zum Fehler bis zu 150 Meter (TDR-Funktion)
n n –
Measurement of line length and distance to fault up to 150 meters (TDR function)
PoE PoE/PoE+-Test mit Anzeige der verfügbaren Leistung nach IEEE802.3af und IEEE802.3at
n n –
PoE test with display of the available power (IEEE802.3af and IEEE802.3at)
Port Identifikation mit Link-Blink-Funktion und Senden von Suchtönen (mit optionaler Probe)
n n –
Port identification with Link-Blink Function and sending search tones (with optical Probe)
Aktiver Netzwerktest mit Static IP oder DHCP sowie 10/100/1000 MBit/s Erkennung
n – –
Active Network Test with static IP or DHCP as well as 10/100/1000 MBit/s detection
Netzwerkscan mit Auflistung der Teilnehmer mit Name, IP- und Mac-Adresse
n – –
Network scan with a list of participants with their name, IP and MAC address
Ping Ping einzelner Adressen, Dauer-Ping mit Anzeige Paketverluste / Antwortzeiten für Stresstest
n – –
xxx.xxx.xx
Ping of individual addresses, PING with packet loss indication / response times for stress test
KE7207
KE7207 besteht aus dem aktiven Netzwerktester KE7200 und dem Leitungssucher Kit KE701 Telco
im stossfesten Kunststoffkoffer inklusive Prüfkabel, Software und Batterien.
Der KE701 Telco ermöglicht dem Anwender zusätzlich Kabel und Adernpaare in kürzester Zeit
berührungslos zu finden und erlaubt den Einsatz an Telefon-, Netzwerk- und spannungsfreien
Elektroinstallationen.
KE7207 comes with the active Network Tester KE7200 and the Cable Finder Kit KE701 Telco in a
durable case including test cables, software and batteries. The KE701 allows the user to precisely
locate wire pairs or cables inside walls or unmarked bundles.
KE7208
KE7208 besteht aus dem aktiven Netzwerktester KE7200 und dem Leitungssucher Kit KE801 Fiber
& Kupfer im stossfesten Kunststoffkoffer inklusive Prüfkabel, Software und Batterien.
Der KE801 Fiber & Kupfer ermöglicht dem Anwender durch den faseroptischen Durchgangsprüfer
mit modulierbarem Laser zusätzlich zur Kabel- und Adernpaaridentifikation auch den Einsatz bei
Glasfaseranbindungen.
KE7208 comes with the active Network Tester KE7200 and the Cable Finder Kit KE801 Fiber &
Copper in a durable case including test cables, software and batteries. The KE801 allows the user to
precisely locate wire pairs or cables inside walls or unmarked bundles and offers additionally the use
with fiber by the build-in fiber optic fault locator with modulatable laser source.
The KE7100 LANcheck is an easy-to-use and cost-saving tool for verification and
troublehooting in small and big networks. The KE7100 is the perfect device for networks
measurements without the need for documentation.
LAN cabling is tested for wire continuity, opens, shorts, miswires and split pairs.
The cable length and distance to fault are detected by TDR.
Connected Devices will be checked for their availiability of Power over Ethernet
(PoE and PoE+) by available type and which power level is supported.
KE7107
KE7107 bestehend aus Netzwerktester KE7100 LANcheck und dem Leitungssucher Kit KE701
Telco im stabilen Kunststoffkoffer inkl. Prüfkabel und Batterien. Ermöglicht dem Anwender zusätzlich
Kabel und Adernpaare in kürzester Zeit berührungslos zu finden und erlaubt den Einsatz an Telefon-,
Netzwerk- und spannungsfreien Elektroinstallationen.
KE7107 comes with the active Network Tester KE7100 LANcheck and the Cable Finder Kit KE701
Telco in a durable case including test cables and batteries. The KE701 allows the user to precisely
locate wire pairs or cables inside walls or unmarked bundles.
KE7108
KE7108 bestehend aus Netzwerktester KE7100 LANcheck und dem Leitungssucher Kit KE801
Fiber & Kupfer im stabilen Kunststoffkoffer inkl. Prüfkabel und Batterien. Ermöglicht dem Anwender
durch den faseroptischen Durchgangsprüfer mit Laser zusätzlich zur Kabel- und Aderpaar-
identifikation auch den Einsatz bei Glasfaser.
KE7108 comes with the active Network Tester KE7100 LANcheck and the Cable Finder Kit KE801
Fiber & Copper in a durable case including test cables and batteries. Allows additionally the use with
fiber by the build-in fiber optic fault locator with laser.
KE7010 Kit: Set aus 4 Remote-Einheiten und Tasche für KE7100 und KE7200.
KE7010 Kit: Set of 4 Remote Units and pouch for KE7100 and KE7200
KE7010 PRO Kit: Set aus 4 Remote-Einheiten, Suchsignalempfänger Probe310 und Tasche für
KE7100 und KE7200.
KE7010 PRO Kit: Set of 4 Remote Units, search signal receiver Probe310 and pouch for KE7100
and KE7200
Zubehör / Accessories
Typ Typ
0.57605 Gerätekoffer / Carrying Case 0.57613 Schutztasche / Protective Pouch
Gerätekoffer, blau mit Kurth Electronic Schutztasche mit Geräte und Kabelfach
Aufdruck Passend für KE7100, inkl. Trageriemen
Passend für Leitungssucher Kits und/oder Netz-
werktester Kit
Protective bag with equipment
Carrying case, blue with Kurth Electronic and cable tray
print Fits KE7100, including strap
Suitable for cable locator kit and / or
Network Tester Kit
LAN Verkabelungstester / LAN Cable Tester
KE6000
Der KE6000 von Kurth Electronic ist ein einfaches Prüfgerät für Patchkabel, LAN und
Fernmeldeverkabelungen. KE6000 prüft und verifiziert ungeschirmte und geschirmte
Verbindungskabel mit verdrillten Doppeladern (UTP- und STP-Kabel) in installierten Netzen oder bei
Patchkabeln. Für installierte Netze werden zwei KE6000 benötigt. Dabei wird dann ein Gerät als
Master und eines als Slave konfiguriert. Der Vorteil ist, dass an beiden Seiten der Status abgelesen
und nach erfolgter Korrektur der Test von beiden Seiten durchgeführt werden kann.
KE6000 is a simple, affordable, fast and efficient Network cable tester. KE6000 can test UTP and STP
patch cables and by using of two units also installed wiring of Telecom and Data cables. KE6000 is
simple to use with the large easy to read LCD display readouts, indicating cable faults or verifying
cable and pin-out-integrity. The fault is shown here as a clear information - no need for watch and
count flashing LEDs. If KE6000 is used to test a inhouse installation, one unit is set to Master the other
is set to Slave. The big advantage is that on both sides the LCD display shows the fault. After
corrective action the cable test can be started from both sides.
Leitungssucher und LAN-Tester Kit, bestehend aus KE401 IT und 2 x KE6000, Batterien, Koffer
0.49450-4 KE6401
Cable Finder and LAN Test Kit, consisting of KE401 IT and 2 x KE6000, batteries, case
Leitungssucher und LAN-Tester Kit, bestehend aus KE501 Elektro und 2 x KE6000, Batterien, Koffer
0.49450-5 KE6501
Cable Finder and LAN Test Kit, consisting of KE501 Electric and 2 x KE6000, batteries, case
Leitungssucher und LAN-Tester Kit, bestehend aus KE701 Telco und 2 x KE6000, Batterien, Koffer
0.49450-7 KE6701
Cable Finder and LAN Test Kit, consisting of KE701 Telco and 2 x KE6000, batteries, case
Leitungssucher und LAN-Tester Kit, bestehend aus KE801 Kupfer und Fiber und 2 x KE6000, Batterien, Koffer
0.49450-8 KE6801
Cable Finder and LAN Test Kit, consisting of KE801 Copper & Fiber and 2 x KE6000, batteries, case
Technische Daten Netzwerktester / Specifications LAN & Ethernet Tester
Verdrahtungsprüfung Kupfer n Prüfung der Datenleitungszuordnung mit PIN- und Paarzuordnung - Wiremap
Wire Test Copper Check of wires connected to PIN and Pair
KE7200 / KE7100 n Erkennung von Split Pair (Überziehung) ab 2 m
Detects split pair from 6 ft (2 m) on
n 16 Anschlussversionen vordefiniert - einfache Erstellung eigener Definitionen ab 2 Adern
16 dedicated wiring schemes predefined, user settable via device
n 7 Kabeltypen vordefiniert mit VF, Erstellung eigener Kabeltypen möglich
Cable types with 7 predefined VP values, user settable via device
n Übersichtliche grafische Anzeige zur schnellen Fehleridentifizierung
Graphical display shows wire map with clear indication good/bad
n Messung der einzelnen Adernlängen mit TDR und Anzeige in m oder ft. von 2 m bis 150 m
Measures all wires separately and shows length to fault short/open
Power over Ethernet Test n Aktivierung der PoE/PoE+-Funktionen / Activation of PoE/PoE+ port
KE7200 / KE7100 n Messung der Spannung in V und Ermittlung der Leistung in Watt nach IEEE802.3af/at
Measuring of voltage and current. Shows available power in Watts
IP-Netzwerktest n Anschluss per DHCP oder statische IP / Checks Network with Static IP or by DHCP
IP Network testing n Erkennen der Netzwerkgeschwindigkeit 10/100/1000 Mbit / Detect the network speed 10/100/1000 Mbit
KE7200 n Eigene IP- und MAC Adresse einstellbar / IP adress and MAC Adress settable
n Auflistung aktiver Teilnehmer mit Name, IP- und MAC-Adresse / Listing of all working stations by Name, IP- and MAC-Address
n Ping Test an ausgewählte Adressen, Ping Rahmen einstellbar von 32 - 1024 Byte
Ping of selected Adresses - frame settable between 32 and 1024 Bit
n Anzeige der Ping-Ergebnisse für Empfangen / Verloren und Zeiten min/max/Durchschnitt
Stand 01/16 - Druckfehler, Irrtümer und technische Änderungen vorbehalten. Alle eingetragenen Warenzeichen und Marken sind, auch wenn nicht ausdrücklich gekennzeichnet, Eigentum der jeweiligen Inhaber.
Shows result number of pings, lost pings, time min/max/average
n Konstanter Ping Modus, um Traffic zu generieren / Constant pPing mode to generate traffic
Bridge Tap & Abzweigung n Genaue Lokalisierung von Stichleitungen und Abzweigungen / Detects and locates Bridge Taps
KE7200
01/16 Product design and specifications subject to change without notice. All trademarks belong to their respective companies.
Batterie n 4 x 1,5 V Alkaline (AA) n 3 x 1,5 V Alkaline (AAA)
Battery > 40 h Standzeit / > 40 hrs operating time – 50 h Standzeit / 50 hrs operating time
® www.kurthelectronic.de