Beruflich Dokumente
Kultur Dokumente
STORA - Preisliste CLT 2019 - en - Low
STORA - Preisliste CLT 2019 - en - Low
Price list
New in 2019
Open and closed rib panels
available on request
Contact details:
Stora Enso
Division Wood Products
Publisher, responsible for the contents: Stora Enso Wood Products GmbH.
Subject to typographical and printing errors.
Printed and published: 01/2019. Price list valid until further notice.
This new document invalidates all previous price lists.
Price list
CLT
C PANELS
Name Nominal thickness Layers NVI*** INV IBI VI IVI BVI
[—] [mm] [s] [€/m²]
CLT 160 C5s 160 5 78,00 87,00 96,00 96,00 105,00 114,00
CLT 150 C5s 150 5 72,50 81,50 90,50 90,50 99,50 108,50
CLT 140 C5s 140 5 70,50 79,50 88,50 88,50 97,50 106,50
CLT 120 C5s 120 5 64,50 73,50 82,50 82,50 91,50 100,50
CLT 100 C5s 100 5 57,50 66,50 75,50 75,50 84,50 93,50
CLT 120 C3s 120 3 56,50 65,50 74,50 74,50 83,50 92,50
CLT 110 C3s 110 3 53,00 62,00 71,00 71,00 80,00 89,00
CLT 100 C3s 100 3 49,50 58,50 67,50 67,50 76,50 85,50
CLT 90 C3s 90 3 44,50 53,50 62,50 62,50 71,50 80,50
CLT 80 C3s 80 3 42,50 51,50 60,50 60,50 69,50 78,50
CLT 70 C3s 70 3 41,00 50,00 59,00 59,00 68,00 77,00
CLT 60 C3s 60 3 38,00 47,00 56,00 56,00 65,00 74,00
L PANELS
Name Nominal thickness Layers NVI*** INV IBI VI IVI BVI
[—] [mm] [s] [€/m²]
CLT 320 L8s-2** 320 8 154,00 163,00 172,00 172,00 181,00 190,00
CLT 300 L8s-2** 300 8 144,50 153,50 162,50 162,50 171,50 180,50
CLT 280 L7s-2* 280 7 134,50 143,50 152,50 152,50 161,50 170,50
CLT 260 L7s-2* 260 7 125,00 134,00 143,00 143,00 152,00 161,00
CLT 240 L7s-2* 240 7 117,00 126,00 135,00 135,00 144,00 153,00
CLT 220 L7s-2* 220 7 108,50 117,50 126,50 126,50 135,50 144,50
CLT 240 L7s 240 7 117,00 126,00 135,00 135,00 144,00 153,00
CLT 200 L7s 200 7 100,00 109,00 118,00 118,00 127,00 136,00
CLT 180 L7s 180 7 92,00 101,00 110,00 110,00 119,00 128,00
CLT 160 L5s-2* 160 5 78,00 87,00 96,00 96,00 105,00 114,00
CLT 200 L5s 200 5 94,50 103,50 112,50 112,50 121,50 130,50
CLT 180 L5s 180 5 86,50 95,50 104,50 104,50 113,50 122,50
CLT 160 L5s 160 5 78,00 87,00 96,00 96,00 105,00 114,00
CLT 150 L5s 150 5 72,50 81,50 90,50 90,50 99,50 108,50
CLT 140 L5s 140 5 70,50 79,50 88,50 88,50 97,50 106,50
CLT 120 L5s 120 5 64,50 73,50 82,50 82,50 91,50 100,50
CLT 100 L5s 100 5 57,50 66,50 75,50 75,50 84,50 93,50
CLT 120 L3s 120 3 56,50 65,50 74,50 74,50 83,50 92,50
CLT 110 L3s 110 3 53,00 62,00 71,00 71,00 80,00 89,00
CLT 100 L3s 100 3 49,50 58,50 67,50 67,50 76,50 85,50
CLT 90 L3s 90 3 44,50 53,50 62,50 62,50 71,50 80,50
CLT 80 L3s 80 3 42,50 51,50 60,50 60,50 69,50 78,50
CLT 70 L3s 70 3 41,00 50,00 59,00 59,00 68,00 77,00
CLT 60 L3s 60 3 38,00 47,00 56,00 56,00 65,00 74,00
2
Frame joint services
Unit price
Frame joint group Definition Unit of charge
[€]
For example: cutting of ceiling panels according to plan,
Floor/ceiling/roof i.e. cuts at right angles and diagonal to the panel surface
m² 5.00
panel processing (cut-outs for stairs, chimneys, ceiling recesses) and cross
joints (step joints, grooves for jointing boards)
For example: cutting of wall panels according to plan,
Wall panel processing i.e. cuts at right angles and diagonal to the panel surface m² 8.00
(door and window cut-outs)
Format cut at right angles, formatted raw panel m² 2.00
volume removed
Special milling (apart from processing of stepped rebates dm³ 0.90
and butt boards)
each hole with diameter of up to 40 mm
Small drill holes piece 1.50
(not including holes for fixing devices)
Large drill holes each hole with diameter of 41–160 mm piece 2.50
Notches / openings purlin, rafter and beam notches and openings piece 10.00
hole with diameter of 28 mm
Concealed cable duct m 30.00
(including undercut for cable feed)
Concealed cable duct in reveal removal of cut-out and milling of a basic slot piece 30.00
Small parts < 1 m² all components with a net area less than 1 m² piece 10.00
if the average gross area of the panels
Average component size < 6 m² m² 5.00
in the entire building project is less than 6 m²
Two-sided processing based on the actual net area of the panel concerned m² 10.00
Panel processing panel processing without chainsaw
m² 2.00
without chainsaw on NVI, INV and IBI quality
Corner rounding corner radius rounded off on openings piece 2.50
Special processing processing which cannot be assigned to any category on request
Extras
Unit price
Definition Unit of charge
[€]
27 × 150 × 5,000 mm | spruce, C quality m 4.00
Cover board
27 × 150 × 5,000 mm | LVL m 3.50
Plugs spruce: ∅ 35 × 10 mm 100 pieces 5.00
Wooden poles spruce: ∅ 35 × 1000 mm piece 6.00
XL panels production width over 2.95 m m² 3.00
loading in loading order, including bundling of pack-
per package 15.00
ages and laying of spacer timbers
Transport preparations
loading in loading order, including bundling of pack-
per package 50.00
ages with adhesive film and laying of spacer timbers
Sound insulation support on request
Open and closed rib panels on request
FSC-certified on request
360App Generation of 3D model piece 100.00
Man hours hour 70.00
3
Fixing devices
Unit price
System Unit of charge
[€]
Lifting sling piece 2.70
Dowel and lifting sling piece 6.50
Lifting screws 25 pieces 25.00
Lifting anchor 2 pieces 200.00
RAMPA insert (for floor elements only) piece 4.50
RAMPA threaded lifting loop M16 × 27 piece 8.00
Product key
For example: CLT 160 L5s-2 BVI WW C24 SAN
Symbol Meaning
C cover layer, crosswise
L cover layer, lengthwise
3s 3-layer
5s 5-layer
5s-2* 5-layer
7s 7-layer
7s-2* 7-layer
8s-2** 8-layer
NVI*** non-visible + non-visible
INV*** industrial visible + non-visible
IBI*** industrial visible + industrial visible
VI*** visible + non-visible
IVI*** visible + industrial visible
BVI*** visible + visible
WW*** species of wood: spruce | fir | pine
C24 raw lamella strength sorting
(in accordance with the approval, up to 10% of lamellas may correspond to sorting grade C16)
SAN sanded cover layers
Coat applied to base/wall support area, up to approx. 5 mm over the edge,
to prevent moisture absorption on end grain surfaces.
END GRAIN Flexible water-repellent colourless film.
SEALING Does not replace the damp proof course! Apply with paint roller. €1.20 per m
Product name: Adler Hinrholzversiegelung 55621 colourless or pigmented.
4
Charging
• Charged dimensions: rectangle circumscribed by the production widths, including any cut-outs which may result
(generally also supplied)
• Charged lengths: from minimum production length of 8.00 m per charged production width up to max. 16.00 m
(in 10 cm increments)
• Production widths: 245 cm, 275 cm and 295 cm; on request up to 3.50 m
15,900 mm
15,882 mm
2,905 mm
2,950 mm
Example: 15,900 × 2,950 mm
Charged dimensions: 2.95 × 15.90 46.91 m²
Area of panel (net): 38.59 m²
Cutting waste: 8.32 m²
Charged dimensions: 46.91 m²
Price terms
• Prices do not include VAT.
• FCA (Free Carrier) Bad St. Leonhard, Ybbs factory premises.
Delivery time
• To be agreed.
• For orders related to a project, delivery time is 4–8 weeks from order placement.
• The delivery time starts from the confirmation and approval of all commercial and technical documents.
Layer structure
• Structures are formed with 3, 5, 7, 8 or more layers and varying lamella thicknesses.
• CLT consists of at least three layers of single-layer panels. From five layers, CLT can also include middle layers
(transverse layers) without narrow side bonding.
• Formaldehyde-free adhesive is used for gluing surfaces, widths and finger joints.
• Maximum total thickness: 320 mm.
• In principle, deviations from the standard structures are only possible by request.
Tolerances
Cutting precision lies within the tolerances for building construction specified in DIN 18203, part 3, for timber and wood-based
wall, floor, ceiling and roof panel products.
5
CLT standard structures
C panels
The grain direction of the cover layers is always
parallel to the production widths.
Thick- Panel Panel design [mm] production
Layers width
ness type production
[—] C *** L C *** L C *** L C ***
[mm] [—] length
160 C5s 5 40 20 40 20 40
150 C5s 5 30 30 30 30 30
140 C5s 5 40 20 20 20 40
120 C5s 5 30 20 20 20 30
100 C5s 5 20 20 20 20 20
120 C3s 3 40 40 40
110 C3s 3 40 30 40
100 C3s 3 30 40 30
90 C3s 3 30 30 30
C3s C5s
80 C3s 3 20 40 20
70 C3s 3 20 30 20
60 C3s 3 20 20 20
L panels
The grain direction of the cover layers is always production
at right angles to the production widths. production width
length
Thick- Panel Panel design [mm]
Layers
ness type
[—] L C L C L C L
[mm] [—]
320 L8s-2** 8 80 40 80 40 80
300 L8s-2** 8 80 30 80 30 80
280 L7s-2* 7 80 40 40 40 80
260 L7s-2* 7 80 30 40 30 80
240 L7s-2* 7 80 20 40 20 80
220 L7s-2* 7 60 30 40 30 60
240 L7s 7 30 40 30 40 30 40 30
200 L7s 7 20 40 20 40 20 40 20
180 L7s 7 30 20 30 20 30 20 30 L3s L5s L5s-2*
160 L5s-2* 5 60 40 60
200 L5s 5 40 40 40 40 40
180 L5s 5 40 30 40 30 40
160 L5s 5 40 20 40 20 40 L7s L7s-2* L8s-2**
150 L5s 5 40 20 30 20 40
140 L5s 5 40 20 20 20 40
120 L5s 5 30 20 20 20 30
* cover layers consisting of two lengthwise
100 L5s 5 20 20 20 20 20 layers
120 L3s 3 40 40 40 ** cover layers and inner layer consisting of two
lengthwise layers
110 L3s 3 40 30 40 *** with C panels, the sanding direction is at right
100 L3s 3 30 40 30 angles to the grain
90 L3s 3 30 30 30
Production widths:
80 L3s 3 20 40 20 245 cm, 275 cm, 295 cm
70 L3s 3 20 30 20 Production lengths: in 10 cm increments
(from minimum production length of 8.00 m
60 L3s 3 20 20 20 up to max. 16.00 m)
6
CLT surface qualities
VI INV NVI
Characteristics
(visible quality) (industrial visible quality) (non-visible quality)
Quality
Discolourations
not permitted not permitted permitted
(brown stains, etc.)
no clusters of pockets,
Resin galls max. 10 × 90 mm permitted
max. 5 × 50 mm
occasional,
Core – pith permitted permitted
up to 40 cm long permitted
Quality of surface finish occasional small faults permitted occasional faults permitted occasional faults permitted
Note: the cross-section and milled surfaces are always NVI quality grade.
7
Key data
We offer CLT rib panels made from Cross Laminated Timber (CLT) and
glue-laminated timber (glulam) by Stora Enso. Enabling long span floor
and roof structures, CLT rib panels provide more flexible and attrac-
tive layouts e.g. commercial office buildings, residential constructions,
schools, industrial buildings, long span roofs, etc.
Stora Enso’s CLT rib panels are CE-marked and have European technical
approval (ETA 17/0911).
Width: 0.8–2.45 m
Maximum dimensions* Length: 6.0–12.0 m
Ideal for spans from 6 m onwards.
Adhesives PUR
8
Applications
Key
benefits
• Prefabrication allows you to build more
quickly and cost effectively
• Fast installation, no need for special
equipment
• Stronger structures with less material
• Savings in foundation costs thanks to a
low dead weight
• Architectural flexibility
• Avoids columns and beams to enable
free space and long spans
• Entirely sourced from renewable wood
Typical applications
in a multi-storey building
9
Standard product range
Open rib panels
w
Hf,1
H
Hw
s s s
w
Hf,1
H
Hw
Hf,1
Hw
H
s s
Hf,2
H
Hw
Hw
s
Hf,2
Bw,e s Bw,e s
90 L3s 120 80 90 L3s 90 L3s 90 L3s 90 L3s 90 L3s 90 L3s 90 L3s 90 L3s
s
H260 H300 H340 H380 H420 H460 H500 H540 H580
100 L3s 120 80 100 L3s 100 L3s 100 L3s 100 L3s 100 L3s 100 L3s 100 L3s 100 L3s 100 L3s
Bw,e Bw,e
H280 H320 H360 H400 H440 H480 H520 H560
120 L3s 120 80 120 L3s 120 L3s 120 L3s 120 L3s 120 L3s 120 L3s 120 L3s 120 L3s
H250 H290 H330 H370 H410 H450 H490 H530
90 L3s 120 100 90 L3s 90 L3s 90 L3s 90 L3s 90 L3s 90 L3s 90 L3s 90 L3s
H260 H300 H340 H380 H420 H460 H500 H540 H580
R30
100 L3s 120 100 100 L3s 100 L3s 100 L3s 100 L3s 100 L3s 100 L3s 100 L3s 100 L3s 100 L3s
H280 H320 H360 H400 H440 H480 H520 H560
120 L3s 120 100 120 L3s 120 L3s 120 L3s 120 L3s 120 L3s 120 L3s 120 L3s 120 L3s
H300 H340 H380 H420 H460 H500 H540 H580
max. 600 mm
100 L5s 200¹ 140 100 L5s 100 L5s 100 L5s 100 L5s 100 L5s 100 L5s 100 L5s 100 L5s
400 up to
120 L5s 200¹ 140 120 L5s 120 L5s 120 L5s 120 L5s 120 L5s 120 L5s 120 L5s
H340 H380 H420 H460 H500 H540 H580
140 L5s 200¹ 140 140 L5s 140 L5s 140 L5s 140 L5s 140 L5s 140 L5s 140 L5s
1) Screws to be staggered in 2 rows
Note: R30 and R60 structural adequacy should be determined by the project structural engineer.
The CLT heights and rib width noted in the standard product range represent the minimum sizes.
10
w
Hf,1
H
Hw
s s s
w
Hf,1 Hf,1
H
Hw Hw
H
s s
Hf,2
s s s
Bw,e Bw,i Bw,e
w
Hf,1 Hf,1
H
Hw
Hw
s
Hf,2
Bw,e s Bw,e s
w
Hf,1
Hw
H
Hf,2
Bw,e Bw,e
Hw
Hf,1 Hf,2 Bw,i Bw,e S
160 200 240 280 320 360 400
90 L3s 80 L3s 120 80 90 L3s 90 L3s 90 L3s 90 L3s 90 L3s 90 L3s 90 L3s
100 L3s 80 L3s 120 80 H340 H380 H420 H460 H500 H540 H580
100 L3s 100 L3s 100 L3s 100 L3s 100 L3s 100 L3s 100 L3s
120 L3s 80 L3s 120 80 H360 H400 H440 H480 H520 H560
120 L3s 120 L3s 120 L3s 120 L3s 120 L3s 120 L3s
Note: R30 and R60 structural adequacy should be determined by the project structural engineer.
The CLT heights and rib width noted in the standard product range represent the minimum sizes.
11
Stora Enso
Transport terms
You must adhere to the following terms and ensure compliance with them for Stora Enso:
1 Access to the building site must be suitable for a semi-trailer. You must ensure that the public roads leading to the
construction site can accommodate a semi-trailer with a total length of approx. 19 m.
2 Transport is understood as delivered to the named place of destination (DAP – Delivered At Place). This does not include
collection by the customer.
3 Transport costs are calculated based on a standard semi-trailer. If the construction site can only be accessed by a
special steerable semi-trailer or similar vehicle, the additional expense shall be charged to the customer.
4 A maximum of 50 m³ or 25 t of CLT solid-wood panels can be transported horizontally per truck load (depending on the
articulated truck). The loading order for the panels can only be complied with to the extent that this does not result in a
violation of traffic laws or impair transport conditions. Stora Enso reserves the right to change the loading order based
on the valid regulations for load securing.
5 If unforeseen events occur which are beyond Stora Enso’s control, Stora Enso shall be entitled to postpone delivery
correspondingly, even if such events only have an indirect effect on processing the order.
6 If goods are collected by the customer, the carrier must provide the appropriate equipment to ensure safe loading and
transport (see the information for collecting customers). If the equipment does not comply with the necessary stipu-
lations and thus optimum load securing cannot be guaranteed, Stora Enso shall not ship any items. The pick-up date
(time) must be communicated by telephone at least 24 hours before arrival at the factory, otherwise longer loading and
waiting times must be expected.
7 For shuttle services (if the trailer is unattached at the construction site), from the third working day, €75.00 (excluding
VAT) shall be charged per idle day. In addition, the customer shall be responsible for the integrity and correct stowage
of the trailer equipment (skids, straps, edge protectors, tarpaulins, etc.). Stora Enso shall charge the customer for any
missing equipment.
8 Transport costs and any additional costs resulting from idle, reloading or handling times shall be charged to the
purchaser. The transport price is understood to include 3 hours idle time for unloading but not including work required for
moving or unloading goods. The agreed price of €20.00 or €25.00 for articulated trailers (excluding VAT) shall be charged
separately for every additional quarter of an hour. The truck driver must sign the consignment note for any idle times.
9 Postponement of delivery: up to a period of 12 working days before delivery, delivery may be postponed at no charge to
the customer. If notice of delivery postponement is given less than 12 working days before delivery, €75.00 (excluding
VAT) will be charged per day postponed for storage and handling. This shall be based on the confirmed delivery day in
the element, freight and charging list.
If bad weather is anticipated during assembly of the CLT panels, the delivery date may be postponed for two working
days at no extra charge. After that time, €75.00 (excluding VAT) shall be charged per working day and truck.
10 Postponement of collection by collecting customers: up to a period of 12 working days before collection, collection
may be postponed at no charge to the customer. If notice of postponement of a collection is given less than 12 working
days before delivery, the load will be wrapped in packages and stored externally for a processing fee of €150.00 per
load (excluding VAT). The maximum storage time is 10 working days; after that time, postponement costs of €75.00
(excluding VAT) will be calculated per working day and per load. This shall be based on the confirmed collection day in
the element, freight and charging list. If bad weather is anticipated during assembly of the CLT panels, the collection date
may be postponed for two working days at no extra charge.