Beruflich Dokumente
Kultur Dokumente
Bedienungsanleitung
Marken:
Smtliche Marken sind Eigentum der jeweiligen Inhaber.
Version:
Bedienungsanleitung V1.0 fr Notebook.
Symbolbeschreibung:
VO RS IC H T
Vorsicht : Weist auf wichtige Information hin, die Ihnen beim Umgang mit Ihrem Notebook helfen knnen.
WEEE:
Dieses Symbol zeigt an, dass dieses Produkt nicht als Hausmll behandelt werden darf. Achten Sie darauf, dass dieses Produkt vorschriftsgem entsorgt wird. Dadurch tragen Sie dazu bei, negative Auswirkungen auf Umwelt und Gesundheit zu vermeiden, die andernfalls durch unsachgerechte Entsorgung dieses Produktes entstehen knnen. Detailliertere Informationen zum Recycling dieses Produktes erhalten Sie von Ihrer rtlichen Stadtverwaltung, von Entsorgungsunternehmen und im Geschft, in dem Sie das Produkt erworben haben.
Alle Rechte vorbehalten. Smtliche Handelsnamen sind eingetragene Marken ihrer jeweiligen gelisteten Hersteller. Smtliche Abbildungen dienen lediglich Anschauungszwecken; Bitte halten Sie sich an das reale Notebook
Sicherheitshinweise
Die folgenden Sicherheitshinweise tragen dazu bei, die Lebensdauer Ihres Notebooks zu verlngern. Befolgen Sie alle Vorsichts-und Sicherheitshinweise. Mit Ausnahme der in dieser Anleitung beschriebenen Ttigkeit berlassen Sie smtliche Wartungsarbeiten ausschlielich qualifizierten Fachleuten.
VO RS IC H T
Stellen Sie das Gert NICHT auf unebenen oder instabilen Unterlagen auf. Lassen Sie das Gert reparieren, falls das Gehuse beschdigt wurde. Setzen Sie das Gert NICHT Staub oder anderen Verschmutzung aus und benutzen Sie es niemals in der Nhe eines Gaslecks. Legen Sie das Notebook NICHT auf dem Scho oder einem anderen Krperteil ab. Auch niedrige Temperaturen knnen zu Unwohlsein oder sogar zu Verletzungen fhren. Drcken Sie NICHT auf LCD-Bildschirm, vermeiden Sie mglichst jede Berhrung. Meiden Sie die Nhe zu Kleinteilen, die das Notebook verkratzen oder darin eindringen knnten. Benutzen Sie das Notebook ausschlielich bei Umgebungstemperaturen zwischen 0oC(32oF) und 40oC(104oF). Lassen Sie KEINERLEI Gegenstnde auf Gert fallen. Legen Sie keine Gegenstnde darauf ab. Setzen Sie das Gert NIEMALS Flssigkeiten, Regen, Feuchtigkeit oder starken magnetischen oder elektrischen Feldern aus. Setzen Sie das Gert NIEMALS Flssigkeiten, Regen, Feuchtigkeit oder starken magnetischen oder elektrischen Feldern aus. Entsorgen Sie das Notebook nicht mit dem regulren Hausmll. Erkndigen Sie sich, welche Vorschriften in Ihrer Region fr die Entsorgung von elektronischen Produkten gelten. Wischen Sie das Notebook mit einem sauberen Schwamm oder einem Fensterleder ab, den/das Sie mit einer Lsung aus einem nicht scheuernden Reinigungsmittel und einigen Tropfen warmem Wasser angefeuchtet haben. Wischen Sie verbleibende Feuchtigkeit mit einem trockenen Tuch ab. Explosionsgefahr bei unsachgemem Austausch der Batterie. Entsorgung der gebrauchten Batterien nach Angaben des Herstellers. Verwenden Sie nur die in diesem Handbuch angegebenen Netzteile und Batterien. Werfen Sie den Akku nicht in Feuer. Er knnte explodieren. Entsorgen Sie den Akku entsprechend dem Gesetz vor Ort.
FCC Vorschriften:
Dieses Gert entspricht Teil 15 der FCC-Vorschriften. Im Betrieb mssen die folgenden beiden Bedingungen erfllt werden: (1) Dieses Gert darf keine schdliche Strstrahlung abgeben, und (2) dieses Gert muss fr empfangene Strstrahlung unempfindlich sein, auch fr Strstrahlung, die unerwnschte Funktionen hervorrufen kann. Dieses Gert wurde geprft und entspricht den Grenzwerten fr digitale Gerte der Klasse B gem Teil 15 der FCC-Vorschriften. Diese Vorschriften wurden fr ausreicheden Schutz gegen Radiofrequenzenergie in Wohngegenden aufgestellt. Dieses Gert erzeugt und verwendet Radiofrequenzenergie und kann diese ausstrahlen. Wenn es nicht entsprechend der Bedienungsanleitung installiert und verwendet wird, kann es Strungen von Funkbertragungen verursachen. Es kann nicht fr alle Installationen gewhrleistet werden, dass keine Strungen auftreten. Falls dieses Gert Strungen des Rundfunk- oder Fernsehempfangs verursacht, was durch Ein-und Ausschalten des Gert ermittelt werden kann, sollten Sie folgende Manahmen ergreifen, um die Strungen zu beheben: - ndern Sie die Ausrichtung oder den Standort der Empfangsantenne. - Vergren Sie den Abstand zwischen dem Gerat und dem Empfnger. - Schlieen Sie das Gert und den Empfnger an unterschiedliche Netzspannungskreise an. - Wenden Sie sich an den Fachhndler oder einen erfahrenen Radio-/ Fernsehtechniker. Vernderungen am Gert, die nicht ausdrcklich von den Verantwortlichen gebiliiigt wurden, knnen das Nutzungsrecht ungltig werden lassen. Die Antenne darf nicht neben einem anderen Transmitter plaziert oder mit einem anderen Transmitter gemeinsam verwendet werden.
WiFi Spezifikation
Wireless LAN Normen Betriebsfrequenz IEEE 802.11g Normen und EWC Normenentwurf 2.400 2.497 GHz
802.11g: 54Mbps mit Rckfallrate von 36, 48, 24, 18, 12, 9, 6Mbps. 802.11b: 11g mit Rckfallrate von11, 5.5, 2, und 1Mbps WLAN 802.11n: Datenbertragungsrate EWC: HT40:135Mbps mit Rckfallrate von121.5, 108, 81,54, 40.5,27, 13.5 HT20:65Mbps mit Rckfallrate von 58.5,52,39,26,19.5,13,6.5 802.11b 17dBm+/-2 dBm fr alle Datenrate 802.11g 6-24Mbps:+17dBm+/-2dB 36Mbps:+17dBm+/-2dB 48Mbps:+17dBm+/-2dB 54Mbps:+16dBm+/-2dB 802.11n HT20 2GHz MCS 0: 17dBm+/-2dB MCS 1: 17dBm+/-2dB MCS 2: 17dBm+/-2dB MCS 3: 17dBm+/-2dB MCS 4: 17dBm+/-2dB MCS 5: 17dBm+/-2dB MCS 6: 16dBm+/-2dB MCS 7: 15dBm+/-2dB 802.11n HT40 2GHz MCS 0: 14dBm+/-2dB MCS 1: 14dBm+/-2dB MCS 2: 14dBm+/-2dB MCS 3: 14dBm+/-2dB MCS 4: 14dBm+/-2dB MCS 5: 14dBm+/-2dB MCS 6: 13dBm+/-2dB MCS 7: 12dBm+/-2dB
Transmitter Ausgangsleitstung
Modulationsverfahren
802.11g: 64QAM (54Mbps, 48Mbps), 16QAM (36Mbps, 24Mbps), QPSK (18Mbps, 12Mbps), BPSK (9Mbps, 6Mbps) 802.11b: CCK (11 Mbps, 5.5Mbps), DQPSK (2 Mbps), DBPSK (1 Mbps) EWC: 64QAM(MCS5, MCS6, MCS7) 16QAM(MCS3, MCS4) QPSK(MCS1,MCS2) BPSK(MCS0)
Bluetooth Spezifikation
Radio Technologie Betriebsfrequenz Kanalzahl Transmitter Ausgangsleistung Reichweite Empfindlichkeit Betriebsspannung Betriebstemperatur Interface FHSS 2.402GHz ~ 2.480GHz 79 Kanal mit 1MHz BW -6~4dBm Ausgangsleistung fr BT Operation Klasse 2 10m (Variiert je nach Betriebsumgebung) -75dBm, BER<0.1% 3.3V+/-0.3V Betriebstemp.: 0 C to +70 C (+32 F to +158 F) Nicht-Betriebstemp.: -10 C to +75C (+14 F to +167 F) USB2.0 Anschluss mit 8-poligen engen Pitch
Inhaltsverzeichnis
Kapitel 1 Vorstellung Ihres Notebooks
Zubehre ........................................................................................................... 2 Produktberblick................................................................................................ 3 Computer aufstellen .......................................................................................... 7 Touchpad-Benutzung ...................................................................................... 10 Spezielle Funktionstasten ............................................................................... 12 Wireless-Netwerkverbindung konfigurieren ..................................................... 13 Bluetooth-Verbindung konfigurieren ................................................................ 14
Anhang
Produktspezifikationen .................................................................................... 31 Notebook FAQ ................................................................................................. 33
Notebook
1-1 Zubehre
Das Produktpaket sollte die folgenden Elemente enthalten: Notebook Akkupack Adapter Netzteil Treiber-DVD
VO RS IC H
Wenden Sie sich bitte an Ihren Hndler, wenn jeder der oben genannten Elementen vor dem Kauf beschdigt oder verloren wurde.
1-2 Produktberblick
Die nachstehende Abbildung zeigt Ihnen die Komponenten auf jeder einzelnen Seite Ihres Notebooks.
1. Oberseite
1
1
2 4
6 8 7 9
VO RS ICH
No. 1 2 3
Beschreibung Videos oder Bilder aufnehmen LED Hintergrundbeleuchtung-Panel Taste fr Ein-/Ausschalten des Notebooks Von links nach rechts: a. Feststelltaste Leuchtet blau, wenn die Feststelltaste aktiviert ist. b. Wireless LAN Die Wireless LAN-LED leuchtet blau, wenn die Wireless LAN-Funktion aktiviert ist. Die Wireless LAN-LED leuchtet blau, wenn die Wireless LAN-Funktion deaktiviert ist. c. Feststelltaste Leuchtet blau, wenn die Feststelltaste aktiviert ist. d. Batterie Leuchtet blau, wenn die Batterie geladen ist. Blinkt blau, wenn die Ladung der Batterie abnimmt. Die Batterie-LED erlischt, wenn die Batterie vollstndig geladen ist. Eingabegert fr die Steuerung der verschiedenen Funktionen von Notebook Funktioniert genauso wie eine Maus und fr die Steuerung des Computer-Cursors benutzt sein Funktioniert genauso wie die linke Maustaste Touchpad sperren oder entsperren Funktioniert genauso wie die rechte Maustaste
Statusanzeiger
5 6 7 8 9
2. Rckseite
1 2
No. 1
Komponent Akkupack
Beschreibung Auswechselbare Batterie, die als das Netzteil von Notebook dient Legen Sie die SIM-Karte (wie das Symbol zeigt) in den Steckplatz ein und vergewissern Sie, dass die Golden Pins der SIM-Karte nach unten gerichtet sind. Warnung: Die SIM-Karte darf nie bei eingeschalteten Gerten eingesetzt oder entnohmen werden. Das kann zum Datenverlust oder zur Beschdigung der Karte fhren.
3. Unterseite
No. Komponent 1 2 3 4 5
VO RS ICH T
Beschreibung Schieben Sie die Akkufixierung nach innen oder nach auen zum Einlegen oder Herausnehmen des Akkus Auswechselbarer Akku, der als das Netzteil von Notebook dient Schieben Sie sie nach auen, um den Akku zu entriegeln Das Festplattenfach schtzt die interne Hardware. ffnet es zum Austausch Das Speicherfach schtzt die Speicher.
Beim Aufladen oder beim Betrieb wird Wrme im Inneren des Notebooks erzeugt und auf die Rckseite des Gehuses durch das Wrmeableitungssystem fr die Khlung bertragen. Das Netzteil kann auch eine Menge von Hitze beim normalen Betrieb erzeugen. Legen Sie dasNotebook und den Transformator NICHT auf dem Scho oder auf einem anderen Krperteil ber lngere Zeitrume beim Betrieb ab. Stellen Sie das Gert NICHT auf weiche Oberflchen (wie Sofas). Dadurch knnen die Belftungsffnungen blockiert werden.
4. Linke Seite
1 2 3 4 5
No. 1 2 3 4 5
Das externe Netzteil anschlieen Belftungsffnung von Notebook USB 2.0-Gerte anschlieen HDMI (High-Definition Multimedia Interface) ist eine volldigitale Audio-/Videoschnittstelle, die die Audio/Videosignale ohne Datenkompression bertragen kann und HDCP-konform ist. Schlieen Sie Audio/Videogert an diesen Port an.
5. Rechte Seite
1 2 3 4 5 6 7
No. 1 2 3 4 5 6
Beschreibung Untersttzt MMC/SD/MS Speicherkarten Kopfhrer anschlieen Mikrofon anschlieen USB 2.0-Gerte anschlieen USB 2.0-Gerte anschlieen ein Kensington-Sicherheitssystem oder eine kompatible Verriegelung anschlieen, um das Notebook gegen Diebstahl zu schtzen. Standard RJ-45 Netzwerk-Anschluss
Akku entnehmen Schritt 1: Schalten Sie das Notebook aus. Trennen Sie alle Kabel und Gerte von der Stromversorgung. Schritt 2: Drehen Sie das Notebook um und entsperren Sie den Akku durch das Schieben der Akkuverriegelung nach auen. Schritt 3: Schieben Sie die gefederte Akkufixierung nach auen und halten Sie sie mit Ihrem Finger an Ort und Stelle gedrckt. Nehmen Sie nun den Akku mit der anderen Hand heraus.
VO RS ICH
Entnehmen Sie den Akku whrend dem Betrieb des Notebooks nicht. Dies kann zum Datenverlust oder zur Datenbeschdigung auf der Festplatte fhren.
2. Netzteil anschlieen
Der Adapter (DC-AC Spannungswandler) versorgt Ihr Notebook mit externer Stromquelle und ldt gleichzeitig den Akku. Mit einem Selbstumschaltung-Design kann der Adapter an Steckdosen mit einer Spannung von 100V AC bis 240V angeschloen werden. Schritt 1: Stecken Sie das Netzteil in den Netzteilanschluss des Adapters. Schritt 2: Stecken Sie den Anschluss des Adapters in den DC-Anschluss des Notebooks. Schritt 3: Stecken Sie das andere Ende des Netzteils in die Steckdose.
VO RS ICH
Der Netzstecker fr die Steckdose kann abhngig von dem lokalen nationalen Standard sein. Der geeignete Stecker wird mit Ihrem Notebook mitgeliefert. Bitte benutzen Sie stets einen Adapter, wenn Sie das Netzteil anschlieen. Der hier gezeigte Stecker kann anders als der im Paket sein und dient nur als Referenz.
3. Starten
Schritt 1: ffnen Sie den Bildschirm Ihres Notebooks.
10
Schritt 2: Schalten Sie das Gert durch das Drcken der Netztaste ein.
Netztaste
4. Herunterfahren im Notfall
Fr den Fall, dass Ihr System nicht ordnungsgem heruntergefahren werden kann, halten Sie den Stromschalter gedrckt, bis das System heruntergefahren ist.
1-4 Touchpad-Benutzung
1. Einfhrung in das Touchpad Das Touchpad funktioniert genauso wie eine Maus. Bei einer Berhrung mit dem Finger ber das Touchpad wird eine Spannung zur Steuerung der Cursorbewegung und der Befehle erzeugt. Das Touchpad empfindet die Fingerbewegungen. Beim Ziehen des Fingers ber das Touchpad bewegt sich der Cursor auf dem Bildschirm. Unter dem Touchpad befinden sich zwei Tasten. Die linke Taste funktioniert wie die linke Maustaste zur Auswahl von Optionen oder zum Start der Programme auf dem Bildschirm. Die rechte Maustaste entspricht der rechten Maustaste.
Touchpad
Linke Taste
Rechte Taste
Lock-Taste
11
2. Einzelklicken/Einzeltippen Um ein Fenster oder eine Taste auszuwhlen, bewegen Sie Ihren Finger ber das Touchpad und setzen Sie den Cursor auf das Fenster oder die Taste, dann tippen Sie einmal auf das Touchpad. Das entspricht einem Drcken auf die linke Maustaste oder die linke Touchpad-Taste. 3. Doppelklicken/Doppeltippen Um einen Ordner oder ein Dokument zu ffnen, bewegen Sie Ihren Finger ber das Touchpad und setzen Sie den Mauszeiger auf das gewnschte Objekt, dann tippen Sie zweimal kurz hintereinander auf das Touchpad. Das entspricht einem zweimal Drcken auf die linke Maustaste oder die linke Touchpad-Taste.
4. Ziehen Bewegen Sie Ihren Finger ber das Touchpad und setzen Sie den Mauszeiger auf das gewnschte Objekt. Jetzt halten Sie die linke Taste mit einem Hand gedrckt und bewegen Sie den Mauszeiger auf die gewnschte Position und lassen die Taste anschlieend los. Alternativ knnen Sie das Objekt doppeltippen und halten Sie den Finger nach dem zweiten Tippen auf dem Touchpad, so kann man Objekte (Symbole) markieren bzw. bewegen (ziehen). 5. Eingaben mit mehreren Fingergesten
Fingergeste Zweifinger-Zoom Zweifinger-drehn Zweifinger-Bildlauf auf/ab oder links/rechts Anwendungen Adobe Reader, Windows Photo Viewer Adobe Reader, Windows Photo Viewer Adobe Reader, MS Word, MS Excel
Zweifinger-vergrern oder verkleinern: Zum Vergrern oder Verkleinern bewegen Sie zwei Finger auf dem Mauspad aufeinander zu oder voneinander fort. Dies ist besonders beim Anzeigen von Fotos oder Dokumenten praktisch. Zweifinger-drehn: Um das Foto oder das Dokument welches Sie betrachten zu drehen, lassen Sie zwei Fingerspitzen auf dem Touchpad einen konzentrischen Kreis ziehen.Sie knnen nach Bedarf in oder entgegen der Uhrzeigerrichtung drehen.
12
Zweifinger-Bildlauf auf/ab oder links/rechts: Zum vertikalen oder horizontalen Bildlauf in einem Fenster lassen Sie zwei Fingerspitzen auf dem Touchpad nach oben/unten oder links/rechts gleiten.
CA UT IO N
Stellen Sie sicher, dass das Wireless-Netzwerk geffnet ist (die Statusanzeige blau zeight), oder drcken Sie die Tasten <Fn> + <F9>, um die WLAN-Funktion zu aktivieren 13
Vo rs
i ch
Wenn es kein <Bluetooth Network Connection> gibt, klicken Sie auf <Fn> + <F11> , um die BluetoothFunktion zu aktivieren.
3. Klicken Sie auf <Add a device>, um nach neuen Gerten zu suchen. 4. Whlen Sie ein Biuethooth-Gert aus der Liste und klicken Sie auf <Next>.
5. Geben Sie den Bluetooth-SicherheitsCode in Ihr Gert ein, um die Kopplung zu starten.
6. Die Kopplung wurde erfolgreich eingerichtet. Klicken Sie auf <Close> zum Beenden der Einstellung.
14
Notebook
Move +/-/ :Change Option Enter:Select Esc :Exit F1 :General help F2/3 :Change color F9 : Optimal defaults F10 : Save and exit v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
2. Legen Sie die Windows 7-Installations-CD ins USB-DVD-Laufwerk ein. 3. Der Computer wird neu gestartet, und die Installation vom Windows 7-Betriebssystem beginnt. 4. Danach wird Windows gestartet, und wird ein Install Windows-Dialogfenster zum Einstellung der Language to install, Time and current format und Keyboard 16
or input method auf dem Bild angezeigt. Klicken Sie auf Next zum Fortfahren und dann auf Install now zum Starten des Setups. 5. Wenn der Lizenzvertrag erscheint, akzeptieren Sie ihn und klicken Sie auf Next zum Fortfahren. 6. Dann werden Sie gefragt, den Installationstyp auszuwhlen. Klicken Sie auf Custom (advanced) , um eine neue Kopie von Windows zu installieren.
2
7. Windows wird die Festplattenpartitionen (z.B. 160GB) von Ihrem System anzeigen. Falls andere Systeme (z.B. Linux) zuvor installiert wurden, sollten Sie sie whlen und auf Drive options (advanced) -> Delete klicken, um sie zu lschen. Wenn alle Partitionen leer sind, wird die maximale Festplattengre angezeigt.
17
8. In diesem Bildfenster klicken Sie auf Drive options (advanced) -> New, um die Partitionen nach Ihrem Wunsch zu erstellen. In diesem Beispiel werden wir eine 70 GBPartition zur Windows-Installation erstellen, klicken Sie auf Apply zum Fortfahren.
2
Um sicherzustellen, dass alle Windowsfeatures ordnungsgem funktionieren, knnte Windows zustzliche Partitionen fr System-Dateien erstellen. So knnen Sie eine von System vorbehaltete100MB-Partition finden, nachdem Sie eine Partition erstellen. Whlen Sie die 70 GB-Partition und klicken Sie auf Next zum Fortfahren. 9. Von diesem Schritt werden wir beginnen, Windows 7 auf Ihrer Festplatte zu installieren. Whrend des Vorgangs wird Ihr Computer mehrmals neu gestartet. 18
10. Wenn die Installation abgeschlossen ist, wird Setup Ihren Computer fr die erste Verwendung vorbereiten. Dann knnen Sie den Schritten folgen, um System-Einstellungen auszuwhlen, ein Konto zu erstellen, ein Passwort festzulegen usw., bis zu der ganze Vorgang abgeschlossen ist.
2. Mit diesen Optionen knnen Sie smtliche Treiber fr Ihr System installieren. Klicken Sie zuerst auf "Intel Chipset Driver", um diese Komponente als Erstes zu installieren. Anschlieend knnen Sie "One Click Setup" auf Next Pagewhlen und die Treiber automatisch installieren lassen - oder die Treiber einzeln durch Anklicken manuell installieren. 3. Nachdem smtliche Treiber installiert wurden, muss das Notebook neu gestartet werden. Und dann knnen Sie es verwenden. 19
Notebook
Windows 7 Systemwiederherstellung
1. Schalten Sie den Computer ein, wenn die Meldung "Press F3 to Rescue and Recovery" auf dem oberen Rand des Bildschirmserscheint, drcken Sie F3 , um die Wiederhertellunsschnittstelle einzutreten.
2. System bereitet sich auf die Wiederherstellung nach dem "F3" -Drcken vor.
21
3. Klicken Sie auf "Start", und dann beginnt die Wiederherstellung wie folgend angezeigt:
22
5. Wenn die folgende Meldung erscheint, ist die Wiederherstellung fertig, klicken Sie auf "OK" zum Abschluss.
23
Notebook
4-1 berblick
Wenn Sie sich beim vorgeladenen OS-System nach dem Einschalten des Notebooks anmelden, wird der folgende Bildschirm erscheinen:
Von links nach rechts: a. Desktop-Symbol c. iBus Eingabemethodel e. Power-Symbol g. Verlassen-Symbol
Die vier Teile bieten verschiedene Anwendungen, um Ihre Bedrfnisse nach Arbeit, Leben und Unterhaltung zu erfllen. Details hierzu finden Sie auf der Hilfe-Seite
Klicken Sie auf "Setting", um die Seite zu ffnen und das System zu optimieren
Klicken Sie auf "Help" , um die Seite zu ffnen. Beziehen Sie sich bitte auf den Inhalt der Seite ber die detaillierte Beschreibung des Systems
25
4-2 Linux-Systemwiederherstellung
Systemwiederherstellung ber DVD
1 Von DVD booten Schalten Sie den Computer ein, legen Sie die Installations-DVD in das DVD-Laufwerk ein, drcken Sie ESC, um das Bootsystem vom DVD-Laufwerk auszuwhlen. 2 Installationsweise auswhlen Wenn der folgende Bildschirm erscheint, whlen Sie Install and make recovery partition, wird das System installiert und eine Wiederherstellungspartition hergestellt. Oder whlen Sie Install system only aus, dann wird das System installiert, aber keine Wiederherstellungspartition hergestellt, also ist es unmglich, das System von der Festplatte wiederherzustellen.
4
3 Klicken Sie auf "Next", eine Warnmeldung wird wie folgend angezeigt: 4 System installieren Klicken Sie auf "Next", um die Partition(hd0,0) zu formatieren und das System von der Festplatte wiederherzustellen. Die Abbildung wird wie nachstehend angezeigt: 26
5 Wenn der Vorgang abgeschlossen ist, starten Sie bitte das System neu. Die Abbildung wird wie nachstehend angezeigt:
27
2 Whlen Sie "FoxOS recovery" und drcken Sie "Enter", eine Warnmeldung wird wie nachstehend angezeigt:
4
3 Whlen Sie "Next". System warnt davor, dass die Root-Partition (hd0, 0) formatiert wird. Die Abbildung wird wie nachstehend angezeigt:
28
4 Klicken Sie auf "Next", um die Partition(hd0,0) zu formatieren und das System von der Festplatte wiederherzustellen. Die Abbildung wird wie nachstehend angezeigt:
5 Wenn der Vorgang abgeschlossen ist, starten Sie bitte das System neu. Die Abbildung wird wie nachstehend angezeigt:
29
Notebook
Anhang
Anhang
Produktspezifikationen
CPU Intel CULV CPU FSB 800MHz
*: Der CPU-Typ ist abhngig vom Modell, den Sie kaufen, beziehen Sie sich bitte auf das reale Produkt.
Chipsatz Speicher
Intel GS45 + ICH9M 1 x DDR3 SDRAM Sockel SODIMM,DDR3 1,066 1GB SODIMM,DDR3 1,066 2GB(Optional) LED backlight panel, 12 WXGA, 1366 x 768 Resolution SATA 2.5 HDD 5400rpm 160GB SATA 2.5 HDD 5400rpm 250GB(Optional) Li-ion aufladbarer Akku 3-cell, 2600mAh 6-cell, 5200mAh (Optional) Untersttzt Verstrker und Mik. untersttzt 2.1 Kanal 2 Stereolautsprecher 3-in-1 MS/SD/MMC 10/100/1000 Mb/s mit geringem Stromverbrauch Bluetooth 2.1+ EDR IEEE 802.11 b/g/n, mini-PCI-e Schnittstelle Mini-PCI-e Schnittstelle, WCDMA oder EV-DO SIM-Kartensteckplatz ist zugnglich im Battriefach. 1.3M Pixel + digitales Mikro 86-Tasten, 1:1 Tastenkappe Verstecktes Touchpad mit zwei Tasten Untersttzt Multi-Finger Lock-Taste 2 x Interne Stereolautsprecher Interne Mikrofon, mit Kamera-Module integriert 19V, 65W ITE IT8502E
Audio
Anhang
Kartenleser LAN Bluetooth (Optional) WiFi 3G Module (WWAN) (Optional) Webcam Tastatur Touchpad
31
I/O Anschlsse
3 x USB 2.0 Anschlss HDMI 1 x VGA Anschluss 1 x RJ-45 LAN Anschluss 1 x Kopfhreranschluss 1 x Mikrofon-Eingang Anschluss 1 x MS/SD/MMC Kartenlesersteckplatz 1 x DC-in Anschluss 1 x Kensington-Lock Anschluss Netz-LED Feststelltaste Nummernfeststelltaste Akkustatusanzeige Festplattenanzeige AMI Untersttzt PnP, ACPI 3.0 Untersttzt Windows 7, Linux FoxOS 298x215x25.3mm 1.38Kg mit 3-cell Batterie SRS Premium Sound bietet das reichhaltigste und intensivste Hrerlebnis in jeder mglichen Hrumgebung an. SRS TruSurround HD kann ein reichhaltiges und intensives Hrerlebnis und virtuellen Surround-Sound fr Ihre Musik, Filme und Computerspiele mit nur 2 Lautsprechern erreichen. SRS CS Headphone benutzt SRS Circle Surround Dekodierungsmethoden, um klaren virtuellen Surround-Sound fr Filme und Computerspiele zu erzeugen, wenn Kopfhrer benutzt werden.
LED Anzeiger
Anhang
32
Notebook FAQ
1. A: Wird die Festplatte stofest konstruiert? B: Ja, sie wird. 2. A: Kann ich den RAM-Speicher erweitern? B: Es hngt von Ihrer Produktspezifikation ab, wenn Sie einen 1GB-RAM erhalten, knnen Sie ihn bis zu 2GB erweitern. 3. A: Knnte die VGA-Speicher im BIOS eingestellt werden? B: Nein, sie knnte nicht. 4. A: Knnte Windows Vista geeignet installiert werden? B: Kein Vista bereit. 5. A: Wie lange knnte der Akku nach dem kompletten Aufladen verwendet werden? B: In der Regel 2-3 Stunden, je nach dem Notebook-Laden. 6. A: Wie steht es mit "Fn + Function keys" ? B: Achten Sie aufmerksam auf die folgenden Funktionstasten, wenn einige nicht funktionieren, prfen Sie sie zuerst: Fn + F1: In den Ruhezustand (Speicherinhalt auf RAM schreiben) Fn + F2: Schaltet auf den externen Monitor um Fn + F3: Audio ein/aus Fn + F9: Wireless LAN ein/aus Wenden Sie sich bitte an die Anleitung fr Spezielle-Funktionstasten auf Seite 13 fr Details. 7. A: Knnen Sie die Funktion der Anzeigen in der oberen linken Ecke vorstellen? B: Von links nach rechts: Die erste Anzeige: beleuchtet, wenn Datei von der Festplatte gelesen oder darauf geschrieben wird. Die zweite Anzeige: Nummern-Feststelltaste ein oder aus Die driite Anzeige: Feststelltaste ein oder aus Die virte Anzeige: der Akkustand 8. A: Warum funktioniert das Touchpad nicht? B: Sie mssen besttigen, ob der Touchpad-Lock Taste im Lock-Modus ist. 9. A: Warum funktioniert das wireless LAN nicht? B: Sie mssen besttigen, ob das Wireless-LAN Funktionstaste aktiviert ist. Wenden Sie sich bitte an die Anleitung fr Spezielle-Funktionstasten auf Seite 13 fr Details. 10. A: Der SD-Kartenleser funktioniert unnormaler. B: Bitte besttigen Sie, ob die Spezifikation der SD-Karte 3-in-1 MS / SD / MMC ist, und dann ob die Gold-Pins der SD-Karte richitig ausgesetzt ist, oder setzen Sie es noch einmal ein. 11. A: Was ist FoxOS? 33
Anhang
B: FosOS ist das Linux-Betriebssystem von Notebook. 12. A: Wie kann man FoxOS ohne CD-ROM wiederhrstellen? B: Von Festplatte wiederherstellen. 13. A: Was soll ich tun, wenn ich das BIOS- oder Linux-Kennwort vergesse? B: Fr dieses Problem wenden Sie sich bitte an dem lokalen Kundendienstzentrum an. 14. A: Wie kann man den Windows 7 Treiber erhalten? B: In DVD mit Ihrem Notebook.
16. A: Das Problem ist, dass die Wireless LAN-Karte die IP-Adresse nicht verteilt.
B: Vielleicht ist es in Bezug auf die Konfiguration von der optimierten Windows 7 Edition. Verwenden Sie die Windows 7 -Komplette Edition, und achten Sie auf die Elemente von der optimierten Konfiguration. Keine Windows 7-Komplette Edition kann unnormalen Betrieb des Systems herbeifhren
17. A: Warum kann die SD-Karte whrend des Wiedereinsetzen nicht erkannt werden,
nachdem Sie die Option safely removing the hardware auswhlen und die verwendende SD-Karte in Windows 7 herausnehmen? B: Es ist normal. Der Kartenleser ist fr Hot-Plug konstruiert, brauchen Sie die Option safely removing the hardware nicht zu whlen. Der Kartenleser kann nur nach dem Neustart des Computers normalerweise funktioniern.
Anhang
34
Trademark:
All trademarks are the property of their respective owners.
Version:
Users Manual V1.0 for Notebook.
Symbol Description:
CA UT IO N
Caution: Refers to important information that can help you to use Notebook
better, and tells you how to avoid problems.
WEEE:
The use of this symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased this product.
Recycling Information
We care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life. These devices contain recyclable materials, which can be re-decomposed and reintegrated into brand-new marvels. On the contrary, other material can be classified to hazardous and poisoned substance. We strongly encourage you to visit our website or call to find out recycling information and services available in your area. http://www.hannspree.com/us 888.808.6789
All rights reserved. All trade names are registered trademarks of respective manufacturers listed. All images are for reference only, please refer to the physical Notebook for specific features.
Safety Precautions
The following safety precautions will increase the life of the Notebook. Please follow all precautions and instructions. Except as described in the manual, refer all servicing to qualified personal.
CA UT IO N
Do not place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged. Do not expose to dirty or dusty environment. And Do not operate during a gas leak. Do not leave the Notebook on your lap or any part of the body to prevent discomfort or injury from heat exposure. Do not press or touch the display screen. Do not place together with small items that may scratch or enter the Notebook. The Notebook should only be used in environment with ambient temperature between 0oC(32oF) and 40oC(104oF). Do not place or drop objects on top. Do not expose to or use near liquidsrainsmoisture or strong magnetic or electrical fields. Do not carry or cover a Notebook that is powered on with any materials that will reduce air circulation such as a carrying bag. Do not throw the Notebook in municipal waste. Check local regulations for disposal of electronic products. Wipe the Notebook using a clean cellulose sponge or chamois cloth dampened with a solution of nonabrasive detergent and a few drops of warm water and remove any extra moisture with a dry cloth. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.
FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
WiFi Specification
Wireless LAN Standards Operating Frequency IEEE 802.11g standard and EWC draft standard 2.400 2.497 GHz 802.11g: 54Mbps with fall back of 36, 48, 24, 18, 12, 9, 6Mbps. 802.11b: 11g with fall back rates of 11, 5.5, 2, and 1Mbps 802.11n: EWC: HT40:135Mbps with fall back of 121.5, 108, 81,54, 40.5,27, 13.5 HT20:65Mbps with fall back of 58.5,52,39,26,19.5,13,6.5 802.11b 17dBm+/-2 dBm for all data rate 802.11g 6-24Mbps:+17dBm+/-2dB 36Mbps:+17dBm+/-2dB 48Mbps:+17dBm+/-2dB 54Mbps:+16dBm+/-2dB 802.11n HT20 2GHz MCS 0: 17dBm+/-2dB MCS 1: 17dBm+/-2dB MCS 2: 17dBm+/-2dB MCS 3: 17dBm+/-2dB MCS 4: 17dBm+/-2dB MCS 5: 17dBm+/-2dB MCS 6: 16dBm+/-2dB MCS 7: 15dBm+/-2dB 802.11n HT40 2GHz MCS 0: 14dBm+/-2dB MCS 1: 14dBm+/-2dB MCS 2: 14dBm+/-2dB MCS 3: 14dBm+/-2dB MCS 4: 14dBm+/-2dB MCS 5: 14dBm+/-2dB MCS 6: 13dBm+/-2dB MCS 7: 12dBm+/-2dB
Modulation Schemes
802.11g: 64QAM (54Mbps, 48Mbps), 16QAM (36Mbps, 24Mbps), QPSK (18Mbps, 12Mbps), BPSK (9Mbps, 6Mbps) 802.11b: CCK (11 Mbps, 5.5Mbps), DQPSK (2 Mbps), DBPSK (1 Mbps) EWC: 64QAM(MCS5, MCS6, MCS7) 16QAM(MCS3, MCS4) QPSK(MCS1,MCS2) BPSK(MCS0)
Bluetooth Specification
Radio Technology Operating Frequency Channel Numbers Transmitter Output Power Coverage Receiver Sensitivity Operating Voltage Working Temperature Interface FHSS 2.402GHz ~ 2.480GHz 79 channels with 1MHz BW -6~4dBm output power for BT class 2 operation 10m (Varies depending on operating environment) -75dBm, BER<0.1% 3.3V+/-0.3V Operating temp: 0 C to +70 C (+32 F to +158 F) Non-operating temp: -10 C to +75C (+14 F to +167 F) USB2.0 with 8 pin narrow pitch connector
Table of Contents
Chapter 1 Introduction to Your Notebook
Accessories ..................................................................................................... 43 External Appearance ....................................................................................... 44 Setting Up Your Computer............................................................................... 49 Touchpad Usage ............................................................................................. 52 Special Function Keys ..................................................................................... 54 Configuring a Wireless Network Connection ................................................... 54 Configuring a Bluetooth Connection................................................................ 55
Chapter 3 Recovery of Windows 7 System .................................................... 62 Chapter 4 Introduction to the Linux System
Overview ......................................................................................................... 66 Recovery of Linux system ............................................................................... 67
Appendix
Product Specification....................................................................................... 72 Notebook FAQ ................................................................................................. 74
Notebook
1-1 Accessories
Check your product package for the following items: Notebook Battery Pack Adapter AC Power Cable Driver DVD
Recovery DVD Quick Installation Guide Warranty Card Carry Bag Wiping Cloth
CA UT IO N
Before your purchase, if any of the above items is damaged or missing, please contact your retailer.
43
1. Top View
1
6 8 7 9
CA UT IO N
44
No. 1 2 3
Description Records videos or take photos LED backlight panel Button for turning the computer's power on/off From left to right: a. HDD Blinking blue when data is written to or read from the hard disk drive. b. Wireless LAN The indicator glows blue when wireless LAN function is enabled. The indicator is off when wireless LAN function is disabled. c. Caps Lock Glowing blue when the keyboard is in Caps-lock mode. d. Battery Glowing blue when the battery is being charged. Blinking blue when the battery is in low battery status. The indicator goes out when the battery is fully charged. Input device used for controlling the Notebook's various functions Works the same way as a mouse and is used for controlling the computer cursor Works the same way as the left mouse button Press the button to lock or unlock the touchpad Works the same way as the right mouse button
Status Indicators
5 6 7 8 9
Keyboard Touchpad Left Touchpad Button Touchpad Lock Button Right Touchpad Button
45
2. Rear View
1 2
1
No. 1 2
Description Replaceable battery pack that serves as Notebook's power supply To insert the SIM card into the slot and make sure that the gold pins of SIM card are downward. Warning: Please do not insert or pull out the SIM card when power-on, otherwise the data may lose or the card would be damaged.
46
3. Bottom View
No. 1 2 3 4 5
Item Battery Lock Battery Pack Battery Latch Hard Disk Cover Memory Cover
Description Slide inwards to lock the battery in place. Slide outwards to unlock battery. Replaceable battery pack. Serves as the Notebook's power supply Push outwards to release battery for removal The Hard Disk Cover protects the internal hardware. Open to exchange device The cover is to protect the memory from damage. Open to exchange device
CA UT IO N
When the computer is running or charging, heat is produced inside the Notebook and transferred to the back of the chassis by the heat dissipation system for cooling. The transformer may also produce a lot of heat during normal use as well. The Notebook and its transformer should therefore not be placed in the lap or on any other body part for prolonged periods during use. Also avoid placing the Notebook on a soft surface (e.g. sofa) as it might block the heat vents and interfere with cooling.
47
4. Left View
1 2 3 4 5
No.
Item VGA Port Power Port Vent USB Port HDMI Port
Description Connects to an external display Connects to the external power supply Notebook's cooling vent Connects to USB 2.0 device The HDMI(High-Definition Multimedia Interface) provides an all-digital audio/video interface to transmit the uncompressed audio/video signals and is HDCP compliant. Connect the HDMI audio/video device to the port.
1 2 3 4 5
5. Right View
1 2 3 4 5 6 7
No. 1 2 3 4 5 6 7
Item Memory Card Slot Headphone Microphone USB Port USB Port Anti-Theft Lock Slot Network Port
Description Supports MMC/SD/MS memory cards Connects to external headphone Connects to external microphone Connects to USB 2.0 device Connects to USB 2.0 device Attach a Kensington security system or a compatible lock to secure your Notebook Standard RJ-45 network port
48
49
1
Removing the Battery 1. Shut down the Notebook. Disconnect all cables and devices. 2. Turn the Notebook over and unlock the battery by pushing the Battery Lock outwards. 3. Push the Battery Latch outwards and hold it in place with your finger. Now use the other hand to pull the battery out.
CA UT IO N
Do not remove the battery while the Notebook is still running. This may damage the data on the hard disk.
50
CA UT IO N
The connector of the power cord for the power outlet may vary depending on the local national standards. The appropriate connector will be bundled with your Notebook. Please always use the connector to connect the power outlet. The connector shown here may not match the type included in the box and is provided for reference only.
3. Startup
1. Open the screen of your Notebook.
51
Power Button
4. Emergency Shutdown
When the Notebook cannot be shut down through normal means, please press and hold the Power Button until the Notebook powers off.
Touchpad
Left Button
Right Button
Lock Button
52
2. Single Tap/ Single Click To select a window function or press a button icon, move your finger across the touchpad to move the cursor to the window or button to select. Now tap the touchpad with your finger to perform the action. This action is equivalent to pressing the left mouse button. You can also press the left touchpad button for the same effect. 3. Double Tap/ Double Click To open a file or document, move your finger across the touchpad to move the cursor to the file you wish to open. Now quickly tap the touchpad twice with your finger to perform the action. This action is equivalent to pressing the left mouse button twice. You can also press the left touchpad button twice for the same effect.
4. Drag Move your finger across the touchpad to move the cursor to the object you wish to drag. Now hold down the left touchpad button with one hand and move the cursor to the desired location. Release the button and complete the drag operation. You can also double tap the object you wish to drag and keep the finger on the touchpad after the second tap to perform the drag operation with one hand. 5. Multi-finger Gesture Input
Finger gesture Two-finger zooming in/out Two-finger rotating Two-finger scrolling up/down or left/right Applications Adobe Reader, Windows Photo Viewer Adobe Reader, Windows Photo Viewer Adobe Reader, MS Word, MS Excel
Two-finger zooming in/out: Moving two fingertips apart or together on the touchpad to zoom in or zoom out. This is convenient when viewing photos or reading documents. Two-finger rotating: Making two fingertips open slightly to draw a concentric circle on the touchpad to rotate the photo or the document you are viewing. You can make a clockwise or counterclockwise rotation based on your needs. Two-finger scrolling up/down or left/right: Making two fingertips open slightly to slide up/down or left/right on the touchpad to scroll a window up/down or left/right. 53
1
CA UT IO N
Make sure that wireless network is in open state (the status indicator shows blue), or please press <Fn> + <F9> to enable the WLAN function.
54
CA UT IO N
If there is no <Bluetooth Network Connection>, please press <Fn> + <F11> to enable Bluetooth function
3. Click <Add a device>to look for new devices. 4. Select a Bluetooth-enabled device from the list and click <Next>.
6. The paired relationship is successfully built. Click <Close> to finish the setting.
5. Enter the Bluetooth security code into your device and start pairing.
55
Notebook
Setting BIOS and Install a new Windows 7 system Install Drivers in Windows 7
Move +/-/ :Change Option Enter:Select Esc :Exit F1 :General help F2/3 :Change color F9 : Optimal defaults F10 : Save and exit v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
2. Put the Windows 7 Install CD into the USB DVD drive. 3. The computer will reboot, and it will start loading files for installing Windows 7 system. 4. After that, it will start Windows and come out a Install Windows dialog box to set the Language to install, Time and current format and Keyboard or input method. Click Next to continue and click Install now button to start the setup. 5. When the license terms appears, select to accept and click Next to continue. 6. It then asks you to select the installation type. Click Custom (advanced) to install a new copy of Windows.
57
7. The setup will display the hard disk partitions (160GB, in this example) of your system. If there were other systems (such as Linux) installed previously, you need select them and click Drive options (advanced) -> Delete to delete them. When all partitions are clean, setup will display the biggest size of your hard drive.
8. In this biggest hard disk size screen, you can click Drive options (advanced) -> New to create partitions as you need. In this example, we are creating a 70GB partition to install Windows, and click Apply to continue.
58
To ensure that all Windows features work correctly, Windows might create additional partitions for system files. So you will see a 100MB partition reserved by system after you create a partition. Select the 70GB partition and click Next to continue.
9. From this step we start to install windows 7 into your hard disk. During the process, your computer will restart several times.
59
10. When the installation is complete, setup will prepare your computer for the first use. Then you can follow steps to select system settings, create an account, set a password...etc, until the whole process is complete and enter Windows 7 system.
2. Use these options to install all the drivers for your system. You must click "Intel Chipset Driver" to install it first. After that, you can click "One Click Setup" to install all the other drivers, or you can click on each individual driver to install it manually. 3. After all the drivers are installed, you need to restart your Notebook, then you can start using it. 60
Notebook
3
2. System prepares for the recovery after pressing "F3" key.
62
63
5. Recovery is accomplished when the following image appears, click "OK" to finish it.
64
Notebook
4-1 Overview
After turning on the Notebook, when you log in Linux system, the following screen will appear:
From left to right is in turn: a. Show Desktop icon c. iBus Input Method icon e. Power icon g. Exit icon
b. Bluetooth icon(optional) d. Network connection status icon f. Volume icon h. Time icon
The four parts provide various applications to meet the needs of your work, life and entertainment, detailed refer to help page.
Click "Help" to open the page, please refer to the content of the page about detailed description of the system.
66
4 Installing system Click "Next" to format hard disk and install system. The figure is shown as below:
67
68
2 Select "FoxOS recovery" item and then press "Enter", the warning box is shown below:
4
3 Select "Next", system warns the root partition(hd0, 0) will be formatted. The figure is shown as below:
69
4 Click "Next" to format partition(hd0,0) and recover system from hard disk. The figure is shown as below:
5 When the process is completed, please reboot the system. The figure is shown as below:
70
Notebook
Appendix
Appendix
Product Specification
CPU Intel CULV CPU FSB 800MHz
*: The CPU type depends on model you purchase, please refer to the physical product.
Chipset Memory
Intel GS45 + ICH9M 1 x DDR3 SDRAM socket SODIMM,DDR3 1,066 1GB SODIMM,DDR3 1,066 2GB(Optional) LED backlight panel, 12 WXGA, resolution 1366 x 768 SATA 2.5 HDD 5400rpm 160GB SATA 2.5 HDD 5400rpm 250GB(Optional) Li-ion rechargeable battery 3-cell, 2600mAh 6-cell, 5200mAh (Optional) Support amplifier and Mic. 2.1 channel support 2 high quality stereo speakers 3-in-1 MS/SD/MMC 10/100/1000 Mb/s with low power consumption Bluetooth 2.1+ EDR IEEE 802.11 b/g/n, mini-PCI-e interface Mini-PCI-e interface, WCDMA or EV-DO SIM card slot is accessible in battery compartment 1.3M pixel + digital mic 86-key full-size keycap Hidden Type touchpad with 2 buttons Support Multi-finger With lock button 2 x internal stereo speakers Internal microphone, Integrated with camera module 19V, 65W ITE IT8502E
Audio
Card Reader LAN Bluetooth (Optional) WiFi 3G Module (WWAN) (Optional) Webcam Keyboard Touchpad
Appendix
72
I/O Ports
3 x USB 2.0 port HDMI 1 x VGA port 1 x RJ-45 LAN port 1 x Headphone port 1 x Microphone In port 1 x MS/SD/MMC card reader slot 1 x DC-in port 1 x Kensington lock port Power LED (Power button) Caps Lock Wireless LAN Battery power HDD AMI Support PnP, ACPI 3.0 Support Windows 7, Linux FoxOS 298x215x25.3mm 1.38Kg with 3-cell battery SRS Premium Sound offers the richest and most immersive audio experience in any listening environment using technologies from SRS Labs. SRS TruSurround HD can offer a rich immersive experience and virtual surround sound for your music, movies, and games over only 2 speakers. SRS CS Headphone uses SRS Circle Surround decoding to deliver accurate virtual surround sound for movie and game content when users listen on headphones.
LED Indicator
Appendix
73
Notebook FAQ
1. A: Does the HDD shock-proof designed? B: Yes, it does. 2. A: Can I expand the RAM stick? B: It depends on your products specification, if you get one with 1GB, you can expand it up to 4GB. 3. A: Could the VGA share memory be adjusted in BIOS? B: No, it couldt. 4. A: Could Windows Vista be installed properly? B: Not Vista ready. 5. A: How long the battery could be used after complete charge? B: About 2-3 hours normaly, according to Notebook loading. 6. A: How about Fn + Function keys ? B: Please pay more attention to hot keys below, if some function fail, please examine them first: Fn + F1: Enter sleep mode (Suspend to RAM) Fn + F2: Switch to the external display Fn + F3: Audio on/off Fn + F9: Wireless LAN on/off Please refer to the instruction of Special Function Keys in page 54 for details. 7. A: Whats the function of LED indicator on the top left corner ? B: From left to right is in turn: The first indicator blinks when data is written to or read from the disk drive. The second indicator means Wireless LAN on or off. The third indicator means the keyboard is in Caps-lock mode. The fourth indicator shows the status of the batterys power. 8. A: Why does the touchpad fail to work? B: You need to confirm whether the touchpad lock button is in lock mode. 9. A: Why does the wireless LAN fail to work? B: You need to confirm whether the wireless LAN function key is enabled or not. Please refer to the instruction of Special Function Keys in page 54 for details. 10. A: SD card reader is unable to work normally. B: Please confirm whether the specification of SD card is 3-in-1 MS/SD/MMC and then the gold pins of SD card are placed down, or to insert it again. 11. A: What is FoxOS? B: FoxOS is the Linux operating system. 12. A: How to recovery FoxOS without CD-ROM? B: Recover system from hard disk. 74
Appendix
13. A: What to do when I forget the BIOS or Linux password? B: Please contact with local sevice center to resolve the problem. 14. A: How to get Windows 7 driver? B: From DVD with your Notebook. 15. A: How to view system configuration in Windows 7? B: Please click Computer in desktop or use CPU-Z and other system tool softwares. 16. A: The problem is that wireless LAN card does not distribute IP address. B: Maybe it is relative to the configuration of Windows 7 optimize edition. Please use Windows 7 complete edition, and pay attention to the items of optimized configuration. No Windows 7 complete edition may cause abnormal operation of the system. 17. A: After choosing the option of safely removing the hardware and taking out the using SD card in Windows 7, but why the SD card can not be detected while inserting it again ? B: It is normal. The card reader is designed for hot plug, you neednt to choose the option of safely removing the hardware. The card reader can work normally only after rebooting the computer.
Appendix
75