Beruflich Dokumente
Kultur Dokumente
CONTI® SILENTSYNC
Eine starke Lösung für geräusch- und
schwingungsarme Antriebe
A Powerful Innovation for Low-Noise
and Low-Vibration Drive Systems
ContiTech
Power Transmission Group 2
CONTI® SILENTSYNC
Starker Ersatz für laute Riemenantriebe.
Consummate replacement for high-noise belt drives.
Mit der Schrägverzahnung leiser werden! Durch die Kombination der Schräg-
verzahnung mit dem Aramidzugstrang und dem starken Kautschuk macht
sich dieser Riemen viele Vorteile zu Nutze. Der SILENTSYNC ist selbstführend,
hat einen hohen Leistungswert und hält hohen Temperaturen stand.
ContiTech Power Transmission Group ist The ContiTech Power Transmission Group is
Entwickler, Hersteller und Lieferant von An- a developer, manufacturer and supplier of
triebsriemen, Komponenten und kompletten power transmission belts, components and
Riementriebsystemen. Durch die Übernahme complete belt drive systems. As a result of the
von Veyance Technologies ist mit dem takeover of Goodyear’s Veyance Technologies,
SILENTSYNC ein hervorragendes Produkt an outstanding product has been added to our
in das Sortiment gekommen. Im Vergleich zu range in the SILENTSYNC. The new SILENTSYNC
anderen Zahnriemen – aber auch Keilriemen – scores in no fewer than three aspects over
punktet der neue SILENTSYNC gleich dreimal. other synchronous belts, but also V-belts.
Vorteil Nummer eins: Der CONTI® SILENTSYNC Advantage number one: CONTI® SILENTSYNC
ist bis zu 19 dB leiser als ein herkömmlicher is up to 19 dB quieter than a conventional
Zahnriemen. Gerade in der Robotik, bei hohen synchronous belt. This represents a significant
Geschwindigkeiten in einem von Menschen reduction in noise nuisance for people, particularly
begangenen Umfeld, ist dies eine signifikante in robotics, an environment where high-speed
Senkung der Schallbelastung für Menschen. drives and people operate in close proximity.
Vorteil Nummer zwei: Der CONTI® SILENTSYNC Advantage number two: The CONTI®
ist durch seinen Aramidzugstrang bis zu 80 % SILENTSYNC’s belt strength is up to 80 % higher
leistungsstärker als ein herkömmlicher Zahnriemen. compared with conventional synchronous belts
Gegenüber flankenoffener Premiumkeilriemen and up to 50 % higher than raw-edge premium
liegt eine bis zu 50 % höhere Leistung vor. Beides V-belts with the same belt width as a result of
bei gleicher Riemenbreite. Dies bietet ein hohes its aramid tension member. This offers a major
Potenzial, Keilriemensysteme schmaler zu gestalten potential to reduce the width of V-belt systems
und die Systemkosten zu verringern. and, thus, system costs.
Vorteil Nummer drei: Der CONTI® SILENTSYNC Advantage number three: CONTI® SILENTSYNC
läuft vibrationsarm. Durch die Schrägverzahnung operates with reduced vibration. The helical
wird der Polygoneffekt nahezu eliminiert, was einen toothing almost eliminates the polygon effect,
hervorragenden Wirkungsgrad von bis zu 98 % resulting in an outstanding efficiency of up to
und eine um 20 % geringere Schwingungsemission 98 % and vibrations up to 20 % lower.
zur Folge hat.
All diese Vorteile machen den CONTI® SILENTSYNC All these advantages also make the CONTI®
auch hervorragend als energiesparendes Substitut SILENTSYNC an excellent energy-efficient
eines Keilriemenantriebes einsetzbar. replacement for a V-belt drive.
Power Transmission Group 4
CONTI® SILENTSYNC
Innovative Konstruktion für leise Antriebe bei hoher Leistung.
Innovative design for low-noise drive systems with high power.
Eigenschaften: Properties:
temperaturbeständig anwendungsspezifisch
R
Temperature range, depending on application,
R
von –30°C bis +130°C from –30°C to +130°C
sehr geräuscharm
R Very low-noise
R
elektrisch leitfähig nach ISO 9563
R Electrically conductive to ISO 9563
R
bedingt ölbeständig
R Conditionally resistant to oil
R
ozonbeständig
R Ozone-resistant
R
alterungsbeständig
R Aging-resistant
R
wartungsfrei
R Maintenance free
R
Die Zähne sind aus Synthesekautschuk geformt The teeth are molded from synthetic rubber
und mit einem spezialbehandeltem Gewebe aus and then made wear-resistant with a specially
Polyamid abriebfest gemacht. Das Material weist treated polyamide fabric. The material offers
eine hohe Festigkeit und Formstabilität auf und high strength and dimensional stability and
gewährleistet somit eine absolut synchrone Kraft- therefore guarantees absolutely synchronous
übertragung. Auch eine bedingte Beständigkeit power transmission. Conditional resistance to
gegen Öl, Kühlschmiermittel, Hitze und Ozone oil, coolants, heat and ozone are also ensured
ist durch das verwendete Material gegeben. thanks to the material used.
Der Zugstrang besteht aus einem Aramid-Cord. The tension member consists of an aramid cord.
Er zeigt keine Alterung oder nennenswerte Deh- It shows no aging or appreciable elongation,
nung, wodurch ein Nachspannen für gewöhnlich meaning that typically no retensioning is needed.
überflüssig wird.
The belt backing made of the same rubber,
Der Riemenrücken aus dem gleichen Kautschuk, though with a polyester fabric, is highly flexible,
jedoch mit einem Polyester-Gewebe, weist eine as a result of which the SILENTSYNC also has
hohe Flexibilität auf, wodurch auch Gegenbiegung no problem with reverse flexing.
kein Problem für den SILENTSYNC darstellt.
The HOT profile (Helical Offset Tooth) incorporates
Das Zahnprofil HOT (Helical Offset Tooth) verbin- an STD profile with all its benefits and the added
det alle Vorteile eines STD Profils mit den Vorteilen advantages of helical tooth design. Self-tracking
der pfeilförmigen Schrägverzahnung. Die Selbst- and lower noise are therefore the characteristic
führung und die Geräuschreduktion sind somit features of this tooth design.
die Charaktereigenschaften des Zahnprofils.
CONTI® SILENTSYNC 5
Teilung / Pitch 8 mm 8 mm 8 mm 14 mm 14 mm 14 mm 14 mm
„
von 48 mm Breite und zwei von 16 mm Breite
sind hierbei möglich.
The SILENTSYNC is manufactured in sleeves.
On a sleeve with an offset of, for example,
64 mm (purple) between the arrow directions,
either belt widths of 64 mm can be produced
or three 32 mm widths each from two sections.
Folgende Längenbereiche sind erhältlich:
One 48 mm wide belt and two of 16 mm in
The following lengths are available:
width are also possible.
Profil/Profile Breite/Width Längenbereich/
Length range
(mm) Lw (mm)
Y = gelb/yellow 16 640-2400
W = weiss/white 32 640-2400
P = lila/purple 64 720-1600
B = blau/blue 35 994-3920
G = grün/green 52,5 994-3920
O = orange/orange 70 1120-3920
R = rot/red 105 1260-3920
CONTI® SILENTSYNC
Hohe Leistung mit messbaren Ergebnissen
High performance with measureable results
Der SILENTSYNC ist mehr als nur ein Zahnriemen. Geräuschärmer Vibrationsärmer
Mit einer bis zu 80 % höheren Leistungsüber- Lower noise Less vibration
tragung und elektrischer Leitfähigkeit* ist er eine
leistungsstarke Weiterentwicklung zu herkömm-
lichen Zahnriemen. 95 105
175
120
200
150
100
125
% of SilentSync 150
80 100
100
75
60
50
50
40
25
20 0
Der SILENTSYNC hat einen leis- Die speziellen Materialien des Unter hohen Drehmomentsbelas-
tungsstarken Wirkungsgrad von SILENTSYNC erlauben es, die tungen bietet der Aramidzugstrang
98 % – beeindruckende 5 % mehr als Riemenbreite und das Gewicht zu des SILENTSYNC einen optimalen
herkömmliche Keilriemenantriebe. reduzieren, ohne Kompromisse Widerstand gegen Ermüdungs-
Dadurch entstehen erhebliche bei der Übertragungsleistung und brüche, Längung und Schockbelas-
Energieeinsparungen. Dieser Effekt der Laufzeit einzugehen. Durch die tungen.
ist vor allem bei Antrieben zu be- Selbstführung des Riemens werden
Under high-torque conditions,
merken, die bis zu 24 Stunden pro keine Bordscheiben benötigt, was
SILENTSYNC’s aramid tensile mem-
Tag laufen. eine weitere Breiten- und Gewichts-
ber provides optimal resistance to
reduzierung mit sich zieht.
SILENTSYNC produces a powerful flex fatigue, elongation and shock
98 % efficiency rating – an impres- The specialized materials that make loads.
sive 5 % higher than conventional up SILENTSYNC belts allow you
V-belt drives. That translates into to reduce overall face width and
significant energy savings. weight without compromising belt SILENTSYNC Riemen / SILENTSYNC belt
This effect is particularly noticeable strength and durability. The belt’s Standard HTD Riemen / Standard HTD belt
in drives running up to 24 hours self-tracking feature eliminates the
a day. need for flanges, thus allowing for
further width and weight reduction.
Legal notice
The content of this publication is not legally
binding and is provided as information only.
The trademarks displayed in this publication
are the property of Continental AG and/or
its affiliates. Copyright © 2019 ContiTech AG.
All rights reserved. For complete information
go to: www.contitech.de/discl_en
(Schr/BL)Printed with ContiTech offset printing blankets on bleached paper free of chlorine
05.19(Schr/BL)
www.contitech.de/discl_en