Beruflich Dokumente
Kultur Dokumente
d1 d1
A B C
ICC
Size Drill Hole Edge
Diameter Ø* Distance Distance
d1 min A min B B+C
NB: DIBt approval applies to Hex Head carbon steel and stainless
steel Hollo-Bolt only. ICC-ES accreditation applies to Hex Head LHBM08 9/16” 1 3/8” 1/2” > 11/16”
Hollo-Bolt in HDG finish only.
LHBM10 3/4” 1 9/16” 9/16” > 7/8”
Hinweis: Gemäß DIBT-Zulassung ist nur die Verwendung des HB
mit Skt.-Schraube zulässig. Laut ICC-ES Zerifikat darf der Typ Hollo- LHBM12 13/16” 2” 11/16” > 1”
Bolt mit feuerverzinkter Beschichtung nur mit Sechskantschraube
angewendet werden.
LHBM16 1 1/16” 2 3/16” 13/16” > 1 5/16”
NB : L’homologation DIBt s’applique seulement à la tête hexagonale LHBM20 1 5/16” 2 3/4” 1” > 1 5/16”
avec manchon en acier carbone et inox. L’homologation ICC-ES
* To comply with ICC-ES ESR 3330 / AC437.
couvre seulement le Hollo-Bolt à Tête Hexagonale en finition GAC.
* Einhalten with ICC-ES ESR 3330 / AC437.
* Pour être conforme à l’ICC-ES 3330 / AC437.
Lindsay House, Brackenbeck Road, Bradford, West Yorkshire, BD7 2NF, England
Tel: +44 (0) 1274 521444 | Fax: +44 (0) 1274 521130 | www.Lindapter.com
CORRECT INSTALLATION / RICHTIGE MONTAGE
Type / Typ HB - Hollo-Bolt
®
A/F
Ref: HB_FEB18
min t
W W
Across Flats
Konterschlüsselweite Hollo-Bolt: Hollo-Bolt:
Surplats M8, M10, M12 M16, M20
Product Clamping Outer Collar Torque Product Clamping Outer Collar Torque
Code Thickness Ply Code Thickness Ply
Artikel- Klemm- Bauteil Bund Anzieh- Artikel- Klemm- Bauteil Bund Anzieh-
nummer länge am Bund moment nummer länge am Bund moment
Code Epaisseur Couche Collier Couple Code Epaisseur Couche Collier Couple
produit de serrage extérieure produit de serrage extérieure
W min t A/F W min t A/F
mm mm mm Nm ft lb
Installation
Montage
1 2 3
Lindsay House, Brackenbeck Road, Bradford, West Yorkshire, BD7 2NF, England
Tel: +44 (0) 1274 521444 | Fax: +44 (0) 1274 521130 | www.Lindapter.com