Beruflich Dokumente
Kultur Dokumente
Bohrgerät
Drilling Rig
October 2016
1
© KLEMM Bohrtechnik GmbH // 10/2016 // KR 806-3G
KR 806-3G
Die Baureihe KR 806 ist der Industriestandard für Veran- The KR 806 series is the industrial standard for anchoring.
kerungsbohrungen. Das Modell KR 806-3G erfüllt dabei die The model KR 806-3G complies with the highest technical
höchsten technischen Anforderungen in puncto Produkti- demands covering productivity, reliability, efficiency, ergono-
vität, Zuverlässigkeit, Effizienz, Ergonomie und Sicherheit. mics and safety.
Das Gerät ist optimal für leistungsintensive Doppelkopfbohr- The drill rig is optimally designed for the use of powerful
anlagen, Hydraulikhämmer oder Drehantriebe ausgelegt. double head drilling units, hydraulic drifters or rotary heads.
Der Antriebsstrang basiert auf einem 160 kW Dieselmotor The drive train is based on a 160 kW diesel engine including
inklusive SCR-only Emissionstechnologie für die Abgas- SCR-only emission technology complying with the exhaust
stufen 4 (EU) oder 4final (EPA). Ein Nachrüst-Dieselpartikel- regulation standards 4 (EU) or 4final (EPA). A retrofit diesel
filter (DPF) ist optional ebenso erhältlich wie eine Motorversi- particulate filter as well as a motor version in 3A (EU) exhaust
on in Abgasstufe 3A (EU). emission category are optionally available.
Das Hydrauliksystem umfasst u.a. ein Zweikreis-LS-System The hydraulic system comprises a load sensing system with
mit den bewährten Technologien Grenzlastregelung und the proven technology load limit control and power sharing
Power Sharing (patentiert). Unter der Bezeichnung EEP- (patented). Known as EEP-assist KLEMM offers an automatic
assist bietet KLEMM ein automatisches Leistungs- und power and energy management by which the engine speed
Energiemanagement. Hierdurch wird die Motordrehzahl is adapted automatically and dynamically according to
automatisch und hochdynamisch an den jeweiligen Last- the load and operating status. This leads to reduced fuel
und Betriebszustand angepasst. Kraftstoffverbrauch und consumption and a lower noise emission level. Additionally
Schallemission werden erheblich gemindert. Zusätzlich passt the mobile hydraulics adapts efficiently and resource-
sich die Mobilhydraulik den unterschiedlichen Bohraufgaben saving to the different drilling tasks and the required load
und dafür erforderlichen Verbraucherkonstellationen effizient constellations.
und ressourcenschonend an.
Für die KR 806-3G existieren Bohrlafetten wahlweise mit The KR 806-3G can be equipped with drill masts either
Getriebe- oder Zylindervorschubsystemen und Adaptions- with feed gear or cylinder feed systems with the option of
möglichkeiten für Gittermastverlängerungen. Der modulare fitting lattice mast extensions. The modularity of the drill
Lafettenaufbau kann durch eine umfangreiche Anzahl von mast allows the adaption of a variety of options which makes
Optionen ergänzt werden. Somit ist das Gerät universell the drill rig universally applicable, e.g. for anchoring, micro
verwendbar, unter anderem für Verankerungen, Mikropfahl- piling, jet grouting and geothermal drilling.
bohrungen, Hochdruckinjektionen und Bohrungen für Erd-
wärmesonden.
Die KLEMM Doppelkopfbohrsysteme zeichnen sich durch KLEMM double head drilling units are characterized by
folgende Vorteile aus: following advantages:
• mehrfach schaltbare Getriebestufen für beide Antriebe • multiple switchable gear stages for both units
• gegenläufiger Drehsinn von Außen- zu Innenbohrstrang • counter rotating drill strings
• geringe Bohrmittenabweichung • minimal straightness deviation
• kontrollierter Bodenentzug • controlled soil scouring
• großer axialer Hub zwischen Außen- und Innenrohrantrieb • large axial stroke between outer and inner drill drive
• erschütterungsarmes Bohren • low-vibration drilling
Die seit Jahrzehnten bewährte kinematische Lafettenanlen- The well-proven drill mast kinematics with a wide range of
kung mit einem großen Bereich von Schwenk- und Einricht- mast movements and set-up possibilities are one of the
möglichkeiten ist eines der Kennzeichen der KR 806-3G. characteristics of the KR 806-3G.
Es sind unter anderem folgende Bohrstellungen möglich: Amongst others, following drilling positions are possible:
• Bohren 90° zum Fahrwerk nach links und rechts unter bis • drilling 90° right and left to the crawler base up to 45°
zu 45° Neigung inclination
• Bohren parallel zum Fahrwerk • drilling parallel to the crawler base
• Vertikalbohrungen mit Schwenkmöglichkeit zu beiden • vertical drilling with swiveling possibility to both sides
Seiten • horizontal drilling in driving direction and lateral to both
• Horizontalbohrungen in Fahrtrichtung und quer zum sides of the crawler base
Fahrwerk nach beiden Seiten
Gemäß EN 16228 verfügt das Bohrgerät über eine CAN-Bus According to EN 16228 the rig features a CAN-bus control
Steuerung mit Performance-Level „c“ - Architektur sowie with performance-level “c” architecture as well as the
über die Schutzbetriebsarten ROM*1 und SPM*2. Das Gerät protection operation modes ROM*1 and SPM*2. The rig is
ist für den Anbau von trennenden Schutzeinrichtungen set-up to carry interlocking guards. A safe and ergonomic
vorbereitet. Eine sichere und ergonomische Bedienung handling is given by the radio remote control of all drilling,
ist durch die Funkfernsteuerung sämtlicher Bohr-, Einricht- setup and driving functions. Optionally an electric control
und Fahrfunktionen gegeben. Ein fest am Bohrgerät panel with classical arrangement of the control elements is
angebrachtes elektrisches Steuerpult mit klassischer available.
Anordnung der Bedienelemente ist optional verfügbar.
*1
ROM eingeschränkte Betriebsart // restricted operating mode
*2
SPM besondere Schutzbetriebsart // special protective mode
2
© KLEMM Bohrtechnik GmbH // 10/2016 // KR 806-3G
KR 806-3G
Optionen Options
Die KR 806-3G bietet diverse Optionen, z. B.: The KR 806-3G offers several options, e.g.:
• Biologisch abbaubares Hydrauliköl und Nebenstrom- • bio-degradable hydraulic oil and bypass filtration
filtration • 500 mm wide track pads (width 2600 mm)
• 500 mm breite Bodenplatten (Gerätebreite 2600 mm) • rod magazine type MAG 2.1V (load capacity 1150 kg)
• Gestängemagazin MAG 2.1V (Nutzlast 1150 kg) • cat head with rope winch, 10 kN tractive force
• Turmkone mit Seilwinde, 10 kN Zugkraft • handling system
• Handhabungssystem • flushing pump
• Spülpumpe • lubricator up to 35 bar with small piston pump
• Öler bis 35 bar mit kleiner Kolbenpumpe • pressure washer
• Waschgerät • HPI drill mast with KH 14SK and MBS 5 system
• HDI-Lafette mit KH 14SK und Bohrdatensystem MBS 5 • winch with 295 m rope length for wire-line core drilling
• Winde mit 295 m Seil für das Seilkernbohren
01 02
03 04
05 06
01 Motorüberwachung // engine control 02 Signalsäule für Betriebsarten EN 16228 // signal lights for operation modes EN 16228
03 Gestängemagazin MAG 2.1V // rod magazine MAG 2.1V 04 EEP-Logo // EEP logo 05 optionale Komponenten // optional components
06 Elektrisches Steuerpult // electric contol panel
3
© KLEMM Bohrtechnik GmbH // 10/2016 // KR 806-3G
KR 806-3G
3000
3880
256
2840
1450
3108 982
3845 5819
3880
°
71
1450
15°
15°
°
45
57
34
a x.
Rm 279 4
Rmin.
4
© KLEMM Bohrtechnik GmbH // 10/2016 // KR 806-3G
KR 806-3G
Abmessungen Dimensions
SPH
6200
375
3780 (NL 3000)
697
min = 1520
max = 2183 2600 2237
1500
45°
°
80
80
°
45
°
5
© KLEMM Bohrtechnik GmbH // 10/2016 // KR 806-3G
KR 806-3G
Abmessungen Dimensions
8920
45°
400
(500)
2500
(2600)
Typ
KR 806-3G
Type
Gesamtlänge
8100 mm
Total Length
2950
Gesamtbreite
2500 mm
Total Width
15°
Gesamthöhe
2950 mm
Total Height
15°
Gesamtgewicht
19 t 3250 2600 2237
348
Total Weight
8087
6
© KLEMM Bohrtechnik GmbH // 10/2016 // KR 806-3G
KR 806-3G
7
© KLEMM Bohrtechnik GmbH // 10/2016 // KR 806-3G
Technische Änderungen ohne Vorankündigung Technical specifications are subject to modifications
und Verpflichtung gegenüber früher gelieferten without prior notice and incurring responsibility for
Geräten. Die abgebildeten Geräte können machines previously delivered. The shown machines
Sonderausstattungen haben. Irrtum und Druckfehler may have optional equipment. Errors and misprints
vorbehalten. reserved.
www.KLEMM-BOHRTECHNIK.de
Group
8
© KLEMM Bohrtechnik GmbH // 10/2016 // KR 806-3G