Beruflich Dokumente
Kultur Dokumente
Wert Beschreibug
0 Undefiniert
1 60870 Master
2 60870 Slave
3 61850 Client
4 61850 Server
6 DP
Tabelle 10: Communication Types
Byte Bit Name IEC
0 0 Redundancy projected W
1 Role (Master/Stand-by) (1 – StandBy) W
2 Partner role (Master/Stand-by) (1 – StandBy) W
3 Partner connected over main connection W
4 Partner connected over secondary connection W
5 Trigger redundancy switchover R
6 Redundancy switchover active W
7 CPU Nummer (0 – CPU 0, 1 – CPU1)
1 0 IEC_CON_FAIL – Alle IEC connections (client/master) are lost on this W
device
1 IEC_CON_FAIL_P – All IEC connections (client/master)are lost on W
partner device
2 all IEC connections (client/master ) connected by this device W
3 all IEC connections (client/master)connected by partner W
4 Information all DP slaves are lost (OB86) R
5 Information all DP slaves are lost by Partner (OB86) W
6 Information all DP slaves are connected R
7 Information all DP slaves are connected by Partner W
2 0 Is synchronised W
1 Is Conn OK - If last data ex cycle in S7 was valid synchronised W
2-7 reserved
3 reserved
4-11 Timestamp of last red. switchover W
12-19 Timestamp of last connection establishment with redundancy partner W
20-27 Timestamp of last connection lost with redundancy partner W
28-31 Value of TIME_TCK R
32-35 Value of TIME_TCK (Partner) W
Tabelle 11: Redundanzmanager (36 Bytes)
Quality Name Quality bits in IEC60870 Quality bits in IEC61850 Quality bits in Profibus
(UDT) Bits DP
0 0x01 Blocked Blocked (BL) operatorBlocked -
1 0x02 Substitute Substituted (SB) substituted | process QSUBS vom
Treiberbaustein
2 0x04 Not actual Not- Topical (NT) oldData QLAST vom
Treiberbaustein
3 0x08 Invalid Invalid (IV) invalid | questionable -
4 0x10 Failure - failure Bit 1, 2, 3, 5 vom
DIAG_INF
5 0x20 Overflow / Overflow (CY / OV) overflow / outOfRange / Bit 0, 6, 7 vom
Inconsisten inconsistent (Analog DIAG_INF
t Overflow oder
outOfRange, Binaer
Inconsistent)
6 0x40 Test - test QSIM vom
Treiberbaustein
7 0x80 Wire break - - Bit 4 vom DIAG_INF