Beruflich Dokumente
Kultur Dokumente
654
Issue: 09/06
1. General Properties
The STEULER Adhesive System 4 consists of the components Steuler Primer P 4, Steuler
Adhesive K 4 and Steuler Hardener H 3 and is used for bonding of pre-vulcanised Steuler
soft rubber sheets onto steel and concrete substrates. Furthermore, non vulcanised soft
rubber sheets on base of chloroprene rubber can be installed on site with this adhesive
system. The Steuler Adhesive 4 has a long application window, a long contact-adhesive
time as well as a high building tack. Furthermore, this adhesive system is CHC-free and
features high bond strength values.
2. Product Description
3. Application Conditions:
3.1 Primer
After the substrate preparation as described in the pertinent Technical Information Sheet of
the rubber sheets, the one-component primer Steuler Primer P 4 is applied.
Note: On stainless steel substrates Steuler Primer P 2A must be used.
Primer
Type: Primer P 4
Colour: Red
Application method : Painting /rolling / spraying
Dilution: Painting/rolling: undiluted
Spraying: 1:1 weight% with Steuler Cleaner
CE
Number of coats: Painting/rolling 1
spraying 2
Drying time: Min. 2 h, max. 7 days
Consumption Approx. 0,2 kg/m² per coat
Colour: Blue
Number of coats: 2
Colour: Blue
Number of coats: 1
The drying times given above refer to an ambient temperature of +20° C and 65% relative
humidity. After the minimum drying times, the rubber sheet is covered with a linen or PE-
sheet and rolled. The real necessary drying times depend on the site conditions.
The linen has to be washed, ironed (free from pleats) and free from threads and fluff.
4. Cleaning
For cleaning of equipment, use Steuler Universalreiniger.
5. Shelf Life
Shelf Life at a storage temperature of +20° C in closed original containers under observance
of the storage conditions acc. to DIN 7716.
Prior to using our material, please make sure that you have the latest issue of the Technical Information and/or Data Sheets. All
details in this Technical Information Sheet are accurate to the best of our knowledge at time of printing.
No liability on our part can be inferred nor can such be accepted on the basis of the information given here. This Technical
Information Sheet must not be construed as implying that it might replace the know-how offered by a specialist applicator. Product
changes reserved.